| Age | Commit message (Collapse) | Author |
|---|
|
NETIF_F_IPV6_CSUM only advertises support for checksum offload of
packets without IPv6 extension headers. Packets with extension
headers must fall back onto software checksumming. Since TSO
depends on checksum offload, those must revert to GSO.
The below commit introduces that fallback. It always checks
network header length. For tunneled packets, the inner header length
must be checked instead. Extend the check accordingly.
A special case is tunneled packets without inner IP protocol. Such as
RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by
transport header either, so also must revert to the software GSO path.
Cc: stable@vger.kernel.org
Fixes: 864e3396976e ("net: gso: Forbid IPv6 TSO with extensions on devices with only IPV6_CSUM")
Reported-by: Tangxin Xie <xietangxin@yeah.net>
Closes: https://lore.kernel.org/netdev/0414e7e2-9a1c-4d7c-a99d-b9039cf68f40@yeah.net/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260320190148.2409107-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After acquiring netdev_queue::_xmit_lock the number of the CPU owning
the lock is recorded in netdev_queue::xmit_lock_owner. This works as
long as the BH context is not preemptible.
On PREEMPT_RT the softirq context is preemptible and without the
softirq-lock it is possible to have multiple user in __dev_queue_xmit()
submitting a skb on the same CPU. This is fine in general but this means
also that the current CPU is recorded as netdev_queue::xmit_lock_owner.
This in turn leads to the recursion alert and the skb is dropped.
Instead checking the for CPU number, that owns the lock, PREEMPT_RT can
check if the lockowner matches the current task.
Add netif_tx_owned() which returns true if the current context owns the
lock by comparing the provided CPU number with the recorded number. This
resembles the current check by negating the condition (the current check
returns true if the lock is not owned).
On PREEMPT_RT use rt_mutex_owner() to return the lock owner and compare
the current task against it.
Use the new helper in __dev_queue_xmit() and netif_local_xmit_active()
which provides a similar check.
Update comments regarding pairing READ_ONCE().
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20260216134333.412332-1-spasswolf@web.de
Fixes: 3253cb49cbad4 ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260302162631.uGUyIqDT@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
binding->dev is protected on the write-side in
mp_dmabuf_devmem_uninstall() against concurrent writes, but due to the
concurrent bare reads in net_devmem_get_binding() and
validate_xmit_unreadable_skb() it should be wrapped in a
READ_ONCE/WRITE_ONCE pair to make sure no compiler optimizations play
with the underlying register in unforeseen ways.
Doesn't present a critical bug because the known compiler optimizations
don't result in bad behavior. There is no tearing on u64, and load
omissions/invented loads would only break if additional binding->dev
references were inlined together (they aren't right now).
This just more strictly follows the linux memory model (i.e.,
"Lock-Protected Writes With Lockless Reads" in
tools/memory-model/Documentation/access-marking.txt).
Fixes: bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260302-devmem-membar-fix-v2-1-5b33c9cbc28b@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I was debugging a NIC driver when I noticed that when I enable
threaded busypoll, bpftrace hangs when starting up. dmesg showed:
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old.
INFO: rcu_tasks detected stalls on tasks:
00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64
task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000
Call Trace:
<TASK>
? napi_threaded_poll_loop+0x27c/0x2c0
? __pfx_napi_threaded_poll+0x10/0x10
? napi_threaded_poll+0x26/0x80
? kthread+0xfa/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
The cause is that in threaded busypoll, the main loop is in
napi_threaded_poll rather than napi_threaded_poll_loop, where the
latter rarely iterates more than once within its loop. For
rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its
qs state, the last_qs must be 100ms behind, and this can't happen
because napi_threaded_poll_loop rarely iterates in threaded busypoll,
and each time napi_threaded_poll_loop is called last_qs is reset to
latest jiffies.
This patch changes so that in threaded busypoll, last_qs is saved
in the outer napi_threaded_poll, and whether busy_poll_last_qs
is NULL indicates whether napi_threaded_poll_loop is called for
busypoll. This way last_qs would not reset to latest jiffies on
each invocation of napi_threaded_poll_loop.
Fixes: c18d4b190a46 ("net: Extend NAPI threaded polling to allow kthread based busy polling")
Cc: stable@vger.kernel.org
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20260227221937.1060857-1-zhuyifei@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link).
Link: https://lore.kernel.org/CANn89iJcLepEin7EtBETrZ36bjoD9LrR=k4cfwWh046GB+4f9A@mail.gmail.com
Fixes: 1f59533f9ca5 ("qdisc: validate frames going through the direct_xmit path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260223235100.108939-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Blamed commit made the assumption that the RPS table for each receive
queue would have the same size, and that it would not change.
Compute flow_id in set_rps_cpu(), do not assume we can use the value
computed by get_rps_cpu(). Otherwise we risk out-of-bound access
and/or crashes.
Fixes: 48aa30443e52 ("net: Cache hash and flow_id to avoid recalculation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Krishna Kumar <krikku@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260220222605.3468081-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Although unlikely, recent support for IPIP tunnels increases chances of
reaching this WARN_ON_ONCE if userspace manages to build a sufficiently
long forward path.
Remove it.
Fixes: ddb94eafab8b ("net: resolve forwarding path from virtual netdevice and HW destination address")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
CONFIG_PREEMPT_RT is special, make this clear in backlog_lock_irq_save()
and backlog_unlock_irq_restore().
The issue shows up with CONFIG_DEBUG_IRQFLAGS=y
raw_local_irq_restore() called with IRQs enabled
WARNING: kernel/locking/irqflag-debug.c:10 at warn_bogus_irq_restore+0xc/0x20 kernel/locking/irqflag-debug.c:10, CPU#1: aoe_tx0/1321
Modules linked in:
CPU: 1 UID: 0 PID: 1321 Comm: aoe_tx0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:warn_bogus_irq_restore+0xc/0x20 kernel/locking/irqflag-debug.c:10
Call Trace:
<TASK>
backlog_unlock_irq_restore net/core/dev.c:253 [inline]
enqueue_to_backlog+0x525/0xcf0 net/core/dev.c:5347
netif_rx_internal+0x120/0x550 net/core/dev.c:5659
__netif_rx+0xa9/0x110 net/core/dev.c:5679
loopback_xmit+0x43a/0x660 drivers/net/loopback.c:90
__netdev_start_xmit include/linux/netdevice.h:5275 [inline]
netdev_start_xmit include/linux/netdevice.h:5284 [inline]
xmit_one net/core/dev.c:3864 [inline]
dev_hard_start_xmit+0x2df/0x830 net/core/dev.c:3880
__dev_queue_xmit+0x16f4/0x3990 net/core/dev.c:4829
dev_queue_xmit include/linux/netdevice.h:3384 [inline]
Fixes: 27a01c1969a5 ("net: fully inline backlog_unlock_irq_restore()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260213120427.2914544-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the GSO TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-5-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should follow the prepare/commit approach for queue configuration.
The qcfg struct should be added to dev->cfg rather than directly to
queue objects so that we can clone and discard the pending config
easily.
Remove the qcfg in struct netdev_rx_queue, and switch remaining callers
to netdev_queue_config(). netdev_queue_config() will construct the qcfg
on the fly based on device defaults and state of the queue.
ndo_default_qcfg becomes optional because having the callback itself
does not have any meaningful semantics to us.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260122005113.2476634-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some/most devices implementing gso_partial need to disable the GSO partial
features when the IP ID can't be mangled; to that extend each of them
implements something alike the following[1]:
if (skb->encapsulation && !(features & NETIF_F_TSO_MANGLEID))
features &= ~NETIF_F_TSO;
in the ndo_features_check() op, which leads to a bit of duplicate code.
Later patch in the series will implement GSO partial support for virtual
devices, and the current status quo will require more duplicate code and
a new indirect call in the TX path for them.
Introduce the mangleid_features mask, allowing the core to disable NIC
features based on/requiring MANGLEID, without any further intervention
from the driver.
The same functionality could be alternatively implemented adding a single
boolean flag to the struct net_device, but would require an additional
checks in ndo_features_check().
Also note that [1] is incorrect if the NIC additionally implements
NETIF_F_GSO_UDP_L4, mangleid_features transparently handle even such a
case.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5a7cdaeea40b0a29b88e525b6c942d73ed3b8ce7.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pavel Begunkov says:
====================
Add support for providers with large rx buffer
Many modern NICs support configurable receive buffer lengths, and zcrx and
memory providers can use buffers larger than 4K to improve performance.
When paired with hw-gro larger rx buffer sizes can drastically reduce
the number of buffers traversing the stack and save a lot of processing
time. It also allows to give to users larger contiguous chunks of data.
Single stream benchmarks showed up to ~30% CPU util improvement.
E.g. comparison for 4K vs 32K buffers using a 200Gbit NIC:
packets=23987040 (MB=2745098), rps=199559 (MB/s=22837)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 1.53 0.00 27.78 2.72 1.31 66.45 0.22
packets=24078368 (MB=2755550), rps=200319 (MB/s=22924)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 0.69 0.00 8.26 31.65 1.83 57.00 0.57
This series adds net infrastructure for memory providers configuring
the size and implements it for bnxt. It's an opt-in feature for drivers,
they should advertise support for the parameter in the qops and must check
if the hardware supports the given size. It's limited to memory providers
as it drastically simplifies implementation. It doesn't affect the fast
path zcrx uAPI, and the user exposed parameter is defined in zcrx terms,
which allows it to be flexible and adjusted in the future.
A liburing example can be found at [2]
full branch:
[1] https://github.com/isilence/linux.git zcrx/large-buffers-v8
Liburing example:
[2] https://github.com/isilence/liburing.git zcrx/rx-buf-len
* tag 'net-queue-rx-buf-len-v9' of https://github.com/isilence/linux:
io_uring/zcrx: document area chunking parameter
selftests: iou-zcrx: test large chunk sizes
eth: bnxt: support qcfg provided rx page size
eth: bnxt: adjust the fill level of agg queues with larger buffers
eth: bnxt: store rx buffer size per queue
net: pass queue rx page size from memory provider
net: add bare bone queue configs
net: reduce indent of struct netdev_queue_mgmt_ops members
net: memzero mp params when closing a queue
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 77b9c4a438fc66e2ab004c411056b3fb71a54f2c, reversing
changes made to 4515ec4ad58a37e70a9e1256c0b993958c9b7497:
931420a2fc36 ("selftests/net: Add netkit container tests")
ab771c938d9a ("selftests/net: Make NetDrvContEnv support queue leasing")
6be87fbb2776 ("selftests/net: Add env for container based tests")
61d99ce3dfc2 ("selftests/net: Add bpf skb forwarding program")
920da3634194 ("netkit: Add xsk support for af_xdp applications")
eef51113f8af ("netkit: Add netkit notifier to check for unregistering devices")
b5ef109d22d4 ("netkit: Implement rtnl_link_ops->alloc and ndo_queue_create")
b5c3fa4a0b16 ("netkit: Add single device mode for netkit")
0073d2fd679d ("xsk: Proxy pool management for leased queues")
1ecea95dd3b5 ("xsk: Extend xsk_rcv_check validation")
804bf334d08a ("net: Proxy netdev_queue_get_dma_dev for leased queues")
0caa9a8ddec3 ("net: Proxy net_mp_{open,close}_rxq for leased queues")
ff8889ff9107 ("net, ethtool: Disallow leased real rxqs to be resized")
9e2103f36110 ("net: Add lease info to queue-get response")
31127deddef4 ("net: Implement netdev_nl_queue_create_doit")
a5546e18f77c ("net: Add queue-create operation")
The series will conflict with io_uring work, and the code needs more
polish.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ./pyynl/cli.py \
--spec ~/netlink/specs/netdev.yaml \
--do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-3-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to pass extra parameters when allocating a queue for memory
providers. Define a new structure for queue configurations, and pass it
to qapi callbacks. It's empty for now, actual parameters will be added
in following patches.
Configurations should persist across resets, and for that they're
default-initialised on device registration and stored in struct
netdev_rx_queue. We also add a new qapi callback for defaulting a given
config. It must be implemented if a driver wants to use queue configs
and is optional otherwise.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
|
|
In blamed commit, I added a check against the temporary queue
built in __dev_xmit_skb(). Idea was to drop packets early,
before any spinlock was acquired.
if (unlikely(defer_count > READ_ONCE(q->limit))) {
kfree_skb_reason(skb, SKB_DROP_REASON_QDISC_DROP);
return NET_XMIT_DROP;
}
It turned out that HTB Qdisc has a zero q->limit.
HTB limits packets on a per-class basis.
Some of our tests became flaky.
Add a new sysctl : net.core.qdisc_max_burst to control
how many packets can be stored in the temporary lockless queue.
Also add a new QDISC_BURST_DROP drop reason to better diagnose
future issues.
Thanks Neal !
Fixes: 100dfa74cad9 ("net: dev_queue_xmit() llist adoption")
Reported-and-bisected-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260107104159.3669285-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add missing entries in netdev_lock_type[] and netdev_lock_name[] :
CAN, MCTP, RAWIP, CAIF, IP6GRE, 6LOWPAN, NETLINK, VSOCKMON,
IEEE802154_MONITOR.
Also add a WARN_ONCE() in netdev_lock_pos() to help future bug hunting
next time a protocol is added without updating these arrays.
Fixes: 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108093244.830280-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some arches (like x86) do not inline spin_unlock_irqrestore().
backlog_unlock_irq_restore() is in RPS/RFS critical path,
we prefer using spin_unlock() + local_irq_restore() for
optimal performance.
Also change backlog_unlock_irq_restore() second argument
to avoid a pointless dereference.
No difference in net/core/dev.o code size.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260105163054.13698-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Aditya Gupta reported PowerPC crashes bisected to the blamed commit.
Apparently some platforms do not allow prefetch() on arbitrary pointers.
prefetch(next);
prefetch(&next->priority); // CRASH when next == NULL
Only NULL seems to be supported, with specific handling in prefetch().
Add a conditional to avoid the two prefetches and the skb->next clearing
for the last skb in the list.
Fixes: b2e9821cff6c ("net: prefech skb->priority in __dev_xmit_skb()")
Reported-by: Aditya Gupta <adityag@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/e9f4abee-b132-440f-a50e-bced0868b5a7@linux.ibm.com/T/#mddc372b64ec5a3b181acc9ee3909110c391cc18a
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Aditya Gupta <adityag@linux.ibm.com>
Link: https://patch.msgid.link/20251218081844.809008-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some qdisc like cake, codel, fq_codel might drop packets
in their dequeue() method.
This is currently problematic because dequeue() runs with
the qdisc spinlock held. Freeing skbs can be extremely expensive.
Add qdisc_dequeue_drop() method and a new TCQ_F_DEQUEUE_DROPS
so that these qdiscs can opt-in to defer the skb frees
after the socket spinlock is released.
TCQ_F_DEQUEUE_DROPS is an attempt to not penalize other qdiscs
with an extra cache line miss.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-14-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Using kfree_skb_list_reason() to free list of skbs from qdisc
operations seems wrong as each skb might have a different drop reason.
Cleanup __dev_xmit_skb() to call tcf_kfree_skb_list() once
in preparation of the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-13-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
q->limit is read locklessly, add a READ_ONCE().
Fixes: 100dfa74cad9 ("net: dev_queue_xmit() llist adoption")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-12-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most qdiscs need to read skb->priority at enqueue time().
In commit 100dfa74cad9 ("net: dev_queue_xmit() llist adoption")
I added a prefetch(next), lets add another one for the second
half of skb.
Note that skb->priority and skb->hash share a common cache line,
so this patch helps qdiscs needing both fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-11-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sch_handle_ingress() sets qdisc_skb_cb(skb)->pkt_len.
We also need to initialize qdisc_skb_cb(skb)->pkt_segs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-5-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
qdisc_pkt_len_init() is currently initalizing qdisc_skb_cb(skb)->pkt_len.
Add qdisc_skb_cb(skb)->pkt_segs initialization and rename this function
to qdisc_pkt_len_segs_init().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Qdisc use shinfo->gso_segs for their pkts stats in bstats_update(),
but this field needs to be initialized for SKB_GSO_DODGY users.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new u16 field, next to pkt_len : pkt_segs
This will cache shinfo->gso_segs to speed up qdisc deqeue().
Move slave_dev_queue_mapping at the end of qdisc_skb_cb,
and move three bits from tc_skb_cb :
- post_ct
- post_ct_snat
- post_ct_dnat
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251121083256.674562-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_defer_free_flush() is becoming more important these days.
Add a prefetch operation to reduce latency a bit on some
platforms like AMD EPYC 7B12.
On more recent cpus, a stall happens when reading skb_shinfo().
Avoiding it will require a more elaborate strategy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20251106085500.2438951-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Revert struct sockaddr from flexible array to fixed 14-byte "sa_data",
to solve over 36,000 -Wflex-array-member-not-at-end warnings, since
struct sockaddr is embedded within many network structs.
With socket/proto sockaddr-based internal APIs switched to use struct
sockaddr_unsized, there should be no more uses of struct sockaddr that
depend on reading beyond the end of struct sockaddr::sa_data that might
trigger bounds checking.
Comparing an x86_64 "allyesconfig" vmlinux build before and after this
patch showed no new "ud1" instructions from CONFIG_UBSAN_BOUNDS nor any
new "field-spanning" memcpy CONFIG_FORTIFY_SOURCE instrumentations.
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-8-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
deliver_skb() should not be inlined as is it not called
in the fast path.
Add unlikely() clauses giving hints to the compiler about this fact.
Before this patch:
size net/core/dev.o
text data bss dec hex filename
121794 13330 176 135300 21084 net/core/dev.o
__netif_receive_skb_core() size on x86_64 : 4080 bytes.
After:
size net/core/dev.o
text data bss dec hex filenamee
120330 13338 176 133844 20ad4 net/core/dev.o
__netif_receive_skb_core() size on x86_64 : 2781 bytes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251103165256.1712169-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to
enable and disable threaded busy polling.
When threaded busy polling is enabled for a NAPI, enable
NAPI_STATE_THREADED also.
When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to
signal napi_complete_done not to rearm interrupts.
Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the
NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the
NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread
go to sleep.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv6 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv6.icmp.errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of icmp6_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Since commit 20e1954fe238 ("ipv6: RFC 4884 partial support for SIT/GRE
tunnels") it is possible for icmp6_send() to be called with an skb that
already contains ICMP extensions. This can happen when we receive an
ICMPv4 message with extensions from a tunnel and translate it to an
ICMPv6 message towards an IPv6 host in the overlay network. I could not
find an RFC that supports this behavior, but it makes sense to not
overwrite the original extensions that were appended to the packet.
Therefore, avoid appending extensions if the length field in the
provided ICMPv6 header is already filled.
Export netdev_copy_name() using EXPORT_IPV6_MOD_GPL() to make it
available to IPv6 when it is built as a module.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add likely() and unlikely() clauses for the common cases:
Device is running.
Queue is not full.
Queue is less than half capacity.
Add max_backlog parameter to skb_flow_limit() to avoid
a second READ_ONCE(net_hotdata.max_backlog).
skb_flow_limit() does not need the backlog_lock protection,
and can be called before we acquire the lock, for even better
resistance to attacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251024090517.3289181-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some high level software drivers need to compute features from lower
devices. But each has their own implementations and may lost some
feature compute. Let's use one common function to compute features
for kinds of these devices.
The new helper uses the current bond implementation as the reference
one, as the latter already handles all the relevant aspects: netdev
features, TSO limits and dst retention.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251017034155.61990-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cpus serving NIC interrupts and specifically TX completions are often
trapped in also restarting a busy qdisc (because qdisc was stopped by BQL
or the driver's own flow control).
When they call netdev_tx_completed_queue() or netif_tx_wake_queue(),
they call __netif_schedule() so that the queue can be run
later from net_tx_action() (involving NET_TX_SOFTIRQ)
Quite often, by the time the cpu reaches net_tx_action(), another cpu
grabbed the qdisc spinlock from __dev_xmit_skb(), and we spend too much
time spinning on this lock.
We can detect in __netif_schedule() if a cpu is already at a specific
point in __dev_xmit_skb() where we have the guarantee the queue will
be run.
This patch gives a 13 % increase of throughput on an IDPF NIC (200Gbit),
32 TX qeues, sending UDP packets of 120 bytes.
This also helps __qdisc_run() to not force a NET_TX_SOFTIRQ
if another thread is waiting in __dev_xmit_skb()
Before:
sar -n DEV 5 5|grep eth1|grep Average
Average: eth1 1496.44 52191462.56 210.00 13369396.90 0.00 0.00 0.00 54.76
After:
sar -n DEV 5 5|grep eth1|grep Average
Average: eth1 1457.88 59363099.96 205.08 15206384.35 0.00 0.00 0.00 62.29
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251017145334.3016097-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove busylock spinlock and use a lockless list (llist)
to reduce spinlock contention to the minimum.
Idea is that only one cpu might spin on the qdisc spinlock,
while others simply add their skb in the llist.
After this patch, we get a 300 % improvement on heavy TX workloads.
- Sending twice the number of packets per second.
- While consuming 50 % less cycles.
Note that this also allows in the future to submit batches
to various qdisc->enqueue() methods.
Tested:
- Dual Intel(R) Xeon(R) 6985P-C (480 hyper threads).
- 100Gbit NIC, 30 TX queues with FQ packet scheduler.
- echo 64 >/sys/kernel/slab/skbuff_small_head/cpu_partial (avoid contention in mm)
- 240 concurrent "netperf -t UDP_STREAM -- -m 120 -n"
Before:
16 Mpps (41 Mpps if each thread is pinned to a different cpu)
vmstat 2 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
243 0 0 2368988672 51036 1100852 0 0 146 1 242 60 0 9 91 0 0
244 0 0 2368988672 51036 1100852 0 0 536 10 487745 14718 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 512 0 503067 46033 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 512 0 494807 12107 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 702 26 492845 10110 0 52 48 0 0
Lock contention (1 second sample taken on 8 cores)
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
442111 6.79 s 162.47 ms 15.35 us spinlock dev_hard_start_xmit+0xcd
5961 9.57 ms 8.12 us 1.60 us spinlock __dev_queue_xmit+0x3a0
244 560.63 us 7.63 us 2.30 us spinlock do_softirq+0x5b
13 25.09 us 3.21 us 1.93 us spinlock net_tx_action+0xf8
If netperf threads are pinned, spinlock stress is very high.
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
964508 7.10 s 147.25 ms 7.36 us spinlock dev_hard_start_xmit+0xcd
201 268.05 us 4.65 us 1.33 us spinlock __dev_queue_xmit+0x3a0
12 26.05 us 3.84 us 2.17 us spinlock do_softirq+0x5b
@__dev_queue_xmit_ns:
[256, 512) 21 | |
[512, 1K) 631 | |
[1K, 2K) 27328 |@ |
[2K, 4K) 265392 |@@@@@@@@@@@@@@@@ |
[4K, 8K) 417543 |@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8K, 16K) 826292 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[16K, 32K) 733822 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32K, 64K) 19055 |@ |
[64K, 128K) 17240 |@ |
[128K, 256K) 25633 |@ |
[256K, 512K) 4 | |
After:
29 Mpps (57 Mpps if each thread is pinned to a different cpu)
vmstat 2 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
78 0 0 2369573632 32896 1350988 0 0 22 0 331 254 0 8 92 0 0
75 0 0 2369573632 32896 1350988 0 0 22 50 425713 280199 0 23 76 0 0
104 0 0 2369573632 32896 1350988 0 0 290 0 430238 298247 0 23 76 0 0
86 0 0 2369573632 32896 1350988 0 0 132 0 428019 291865 0 24 76 0 0
90 0 0 2369573632 32896 1350988 0 0 502 0 422498 278672 0 23 76 0 0
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
2524 116.15 ms 486.61 us 46.02 us spinlock __dev_queue_xmit+0x55b
5821 107.18 ms 371.67 us 18.41 us spinlock dev_hard_start_xmit+0xcd
2377 9.73 ms 35.86 us 4.09 us spinlock ___slab_alloc+0x4e0
923 5.74 ms 20.91 us 6.22 us spinlock ___slab_alloc+0x5c9
121 3.42 ms 193.05 us 28.24 us spinlock net_tx_action+0xf8
6 564.33 us 167.60 us 94.05 us spinlock do_softirq+0x5b
If netperf threads are pinned (~54 Mpps)
perf lock record -C0-7 sleep 1; perf lock contention
32907 316.98 ms 195.98 us 9.63 us spinlock dev_hard_start_xmit+0xcd
4507 61.83 ms 212.73 us 13.72 us spinlock __dev_queue_xmit+0x554
2781 23.53 ms 40.03 us 8.46 us spinlock ___slab_alloc+0x5c9
3554 18.94 ms 34.69 us 5.33 us spinlock ___slab_alloc+0x4e0
233 9.09 ms 215.70 us 38.99 us spinlock do_softirq+0x5b
153 930.66 us 48.67 us 6.08 us spinlock net_tx_action+0xfd
84 331.10 us 14.22 us 3.94 us spinlock ___slab_alloc+0x5c9
140 323.71 us 9.94 us 2.31 us spinlock ___slab_alloc+0x4e0
@__dev_queue_xmit_ns:
[128, 256) 1539830 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[256, 512) 2299558 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[512, 1K) 483936 |@@@@@@@@@@ |
[1K, 2K) 265345 |@@@@@@ |
[2K, 4K) 145463 |@@@ |
[4K, 8K) 54571 |@ |
[8K, 16K) 10270 | |
[16K, 32K) 9385 | |
[32K, 64K) 7749 | |
[64K, 128K) 26799 | |
[128K, 256K) 2665 | |
[256K, 512K) 665 | |
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commits 0f022d32c3eca477fbf79a205243a6123ed0fe11
and 44180feaccf266d9b0b28cc4ceaac019817deb5c.
Prior patch in this series implemented loop detection
in act_mirred, we can remove q->owner to save some cycles
in the fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a followup of commit 726e9e8b94b9 ("tcp: refine
skb->ooo_okay setting") and of prior commit in this series
("net: control skb->ooo_okay from skb_set_owner_w()")
skb->ooo_okay might never be set for bulk flows that always
have at least one skb in a qdisc queue of NIC queue,
especially if TX completion is delayed because of a stressed cpu.
The so-called "strange attractors" has caused many performance
issues (see for instance 9b462d02d6dd ("tcp: TCP Small Queues
and strange attractors")), we need to do better.
We have tried very hard to avoid reorders because TCP was
not dealing with them nicely a decade ago.
Use the new net.core.txq_reselection_ms sysctl to let
flows follow XPS and select a more efficient queue.
After this patch, we no longer have to make sure threads
are pinned to cpus, they now can be migrated without
adding too much spinlock/qdisc/TX completion pressure anymore.
TX completion part was problematic, because it added false sharing
on various socket fields, but also added false sharing and spinlock
contention in mm layers. Calling skb_orphan() from ndo_start_xmit()
is not an option unfortunately.
Note for later:
1) move sk->sk_tx_queue_mapping closer
to sk_tx_queue_mapping_jiffies for better cache locality.
2) Study if 9b462d02d6dd ("tcp: TCP Small Queues
and strange attractors") could be revised.
Tested:
Used a host with 32 TX queues, shared by groups of 8 cores.
XPS setup :
echo ff >/sys/class/net/eth1/queue/tx-0/xps_cpus
echo ff00 >/sys/class/net/eth1/queue/tx-1/xps_cpus
echo ff0000 >/sys/class/net/eth1/queue/tx-2/xps_cpus
echo ff000000 >/sys/class/net/eth1/queue/tx-3/xps_cpus
echo ff,00000000 >/sys/class/net/eth1/queue/tx-4/xps_cpus
echo ff00,00000000 >/sys/class/net/eth1/queue/tx-5/xps_cpus
echo ff0000,00000000 >/sys/class/net/eth1/queue/tx-6/xps_cpus
echo ff000000,00000000 >/sys/class/net/eth1/queue/tx-7/xps_cpus
...
Launched a tcp_stream with 15 threads and 1000 flows, initially affined to core 0-15
taskset -c 0-15 tcp_stream -T15 -F1000 -l1000 -c -H target_host
Checked that only queues 0 and 1 are used as instructed by XPS :
tc -s qdisc show dev eth1|grep backlog|grep -v "backlog 0b 0p"
backlog 123489410b 1890p
backlog 69809026b 1064p
backlog 52401054b 805p
Then force each thread to run on cpu 1,9,17,25,33,41,49,57,65,73,81,89,97,105,113,121
C=1;PID=`pidof tcp_stream`;for P in `ls /proc/$PID/task`; do taskset -pc $C $P; C=$(($C + 8));done
Set txq_reselection_ms to 1000
echo 1000 > /proc/sys/net/core/txq_reselection_ms
Check that the flows have migrated nicely:
tc -s qdisc show dev eth1|grep backlog|grep -v "backlog 0b 0p"
backlog 130508314b 1916p
backlog 8584380b 126p
backlog 8584380b 126p
backlog 8379990b 123p
backlog 8584380b 126p
backlog 8487484b 125p
backlog 8584380b 126p
backlog 8448120b 124p
backlog 8584380b 126p
backlog 8720640b 128p
backlog 8856900b 130p
backlog 8584380b 126p
backlog 8652510b 127p
backlog 8448120b 124p
backlog 8516250b 125p
backlog 7834950b 115p
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251013152234.842065-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since blamed commit, unregister_netdevice_many_notify() takes the netdev
mutex if the device needs it.
If the device list is too long, this will lock more device mutexes than
lockdep can handle:
unshare -n \
bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done'
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by kworker/u16:1/69:
#0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work
#1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work
#2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net
#3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch
#4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify
[..]
Add a helper to close and then unlock a list of net_devices.
Devices that are not up have to be skipped - netif_close_many always
removes them from the list without any other actions taken, so they'd
remain in locked state.
Close devices whenever we've used up half of the tracking slots or we
processed entire list without hitting the limit.
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of sharing sd->defer_list & sd->defer_count with
many cpus, add one pair for each NUMA node.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Get rid of sd->defer_lock and adopt llist operations.
We optimize skb_attempt_defer_free() for the common case,
where the packet is queued. Otherwise sd->defer_count
is increasing, until skb_defer_free_flush() clears it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is preparation work to remove the softnet_data.defer_lock,
as it is contended on hosts with large number of cores.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, NETIF_F_TSO_MANGLEID indicates that the inner-most ID can
be mangled. Outer IDs can always be mangled.
Make GSO preserve outer IDs by default, with NETIF_F_TSO_MANGLEID allowing
both inner and outer IDs to be mangled.
This commit also modifies a few drivers that use SKB_GSO_FIXEDID directly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-4-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
