| Age | Commit message (Collapse) | Author |
|---|
|
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-11-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-8-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-4-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.
Lets rename peripheral to pas_id to reflect closer to its meaning.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-3-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix kernel-doc warnings by using correct kernel-doc syntax and
formatting to prevent warnings:
Warning: include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_STATIC' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_MULTIPLIER' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_ON_DEMAND' not described in enum 'qcom_tzmem_policy'
Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20251017191323.1820167-1-rdunlap@infradead.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Anyone with access to contiguous physical memory should be able to
share memory with QTEE using shm_bridge.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Reviewed-by: Kuldeep Singh <quic_kuldsing@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-1-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_scm_shm_bridge_enable() is used early in the SCM initialization
routine. It makes an SCM call and so expects the internal __scm pointer
in the SCM driver to be assigned. For this reason the tzmem memory pool
is allocated *after* this pointer is assigned. However, this can lead to
a crash if another consumer of the SCM API makes a call using the memory
pool between the assignment of the __scm pointer and the initialization
of the tzmem memory pool.
As qcom_scm_shm_bridge_enable() is a special case, not meant to be
called by ordinary users, pull it into the local SCM header. Make it
take struct device as argument. This is the device that will be used to
make the SCM call as opposed to the global __scm pointer. This will
allow us to move the tzmem initialization *before* the __scm assignment
in the core SCM driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-2-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_scm_shm_bridge_create() and qcom_scm_shm_bridge_delete() take
struct device as argument but don't use it. Remove it from these
functions' prototypes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-1-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add helper functions for the SCM calls required to support
hardware-wrapped inline storage encryption keys. These SCM calls manage
wrapped keys via Qualcomm's Hardware Key Manager (HWKM), which can only
be accessed from TrustZone.
QCOM_SCM_ES_GENERATE_ICE_KEY and QCOM_SCM_ES_IMPORT_ICE_KEY create a new
long-term wrapped key, with the former making the hardware generate the
key and the latter importing a raw key. QCOM_SCM_ES_PREPARE_ICE_KEY
converts the key to ephemerally-wrapped form so that it can be used for
inline storage encryption. These are planned to be wired up to new
ioctls via the blk-crypto framework; see the proposed documentation for
the hardware-wrapped keys feature for more information.
Similarly there's also QCOM_SCM_ES_DERIVE_SW_SECRET which derives a
"software secret" from an ephemerally-wrapped key and will be wired up
to the corresponding operation in the blk_crypto_profile.
These will all be used by the ICE driver in drivers/soc/qcom/ice.c.
[EB: merged related patches, fixed error handling, fixed naming, fixed
docs for size parameters, fixed qcom_scm_has_wrapped_key_support(),
improved comments, improved commit message.]
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20241213041958.202565-9-ebiggers@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The QCOM_SCM_SVC_MP service provides QCOM_SCM_MP_CP_SMMU_APERTURE_ID,
which is used to trigger the mapping of register banks into the SMMU
context for per-processes page tables to function (in case this isn't
statically setup by firmware).
This is necessary on e.g. QCS6490 Rb3Gen2, in order to avoid "CP | AHB
bus error"-errors from the GPU.
Introduce a function to allow the msm driver to invoke this call.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20241110-adreno-smmu-aparture-v2-1-9b1fb2ee41d4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qseecom_scm_dev(), qseecom_dma_alloc() and qseecom_dma_free() are no
longer used following the conversion to using tzmem. Remove them.
Fixes: 6612103ec35a ("firmware: qcom: qseecom: convert to using the TZ allocator")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240731-tzmem-efivars-fix-v2-2-f0e84071ec07@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SHM Bridge is a safety mechanism allowing to limit the amount of memory
shared between the kernel and the TrustZone to regions explicitly marked
as such.
Add low-level primitives for enabling SHM bridge support as well as
creating and destroying SHM bridges to qcom-scm.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-10-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drop the DMA mapping operations from qcom_scm_qseecom_app_send() and
convert all users of it in the qseecom module to using the TZ allocator
for creating SCM call buffers. As this is largely a module separate from
the SCM driver, let's use a separate memory pool. Set the initial size to
4K and - if we run out - add twice the current amount to the pool.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Amirreza Zarrabi <quic_azarrabi@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-9-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We have several SCM calls that require passing buffers to the TrustZone
on top of the SMC core which allocates memory for calls that require
more than 4 arguments.
Currently every user does their own thing which leads to code
duplication. Many users call dma_alloc_coherent() for every call which
is terribly unperformant (speed- and size-wise).
Provide a set of library functions for creating and managing pools of
memory which is suitable for sharing with the TrustZone, that is:
page-aligned, contiguous and non-cachable as well as provides a way of
mapping of kernel virtual addresses to physical space.
Make the allocator ready for extending with additional modes of operation
which will allow us to support the SHM bridge safety mechanism once all
users convert.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Tested-by: Deepti Jaggi <quic_djaggi@quicinc.com> #sa8775p-ride
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240527-shm-bridge-v10-2-ce7afaa58d3a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This will used by drm/msm to initialize GPU registers that Qualcomm's
firmware doesn't make writeable to the kernel.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240430-a750-raytracing-v3-2-7f57c5ac082d@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
It turns out that while the QSEECOM APP_SEND command has specific fields
for request and response buffers, uefisecapp expects them both to be in
a single memory region. Failure to adhere to this has (so far) resulted
in either no response being written to the response buffer (causing an
EIO to be emitted down the line), the SCM call to fail with EINVAL
(i.e., directly from TZ/firmware), or the device to be hard-reset.
While this issue can be triggered deterministically, in the current form
it seems to happen rather sporadically (which is why it has gone
unnoticed during earlier testing). This is likely due to the two
kzalloc() calls (for request and response) being directly after each
other. Which means that those likely return consecutive regions most of
the time, especially when not much else is going on in the system.
Fix this by allocating a single memory region for both request and
response buffers, properly aligning both structs inside it. This
unfortunately also means that the qcom_scm_qseecom_app_send() interface
needs to be restructured, as it should no longer map the DMA regions
separately. Therefore, move the responsibility of DMA allocation (or
mapping) to the caller.
Fixes: 759e7a2b62eb ("firmware: Add support for Qualcomm UEFI Secure Application")
Cc: stable@vger.kernel.org # 6.7
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240406130125.1047436-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The qseecom header does not contain ifdef guards against multiple
inclusion. Add them.
Fixes: 00b1248606ba ("firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231004185732.98621-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 'extern' specifier in front of a function declaration has no effect.
Remove all of them from the qcom-scm header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230913192826.36187-1-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SCM interface
Add support for SCM calls to Secure OS and the Secure Execution
Environment (SEE) residing in the TrustZone (TZ) via the QSEECOM
interface. This allows communication with Secure/TZ applications, for
example 'uefisecapp' managing access to UEFI variables.
For better separation, make qcom_scm spin up a dedicated child
(platform) device in case QSEECOM support has been detected. The
corresponding driver for this device is then responsible for managing
any QSEECOM clients. Specifically, this driver attempts to automatically
detect known and supported applications, creating a client (auxiliary)
device for each one. The respective client/auxiliary driver is then
responsible for managing and communicating with the application.
While this patch introduces only a very basic interface without the more
advanced features (such as re-entrant and blocking SCM calls and
listeners/callbacks), this is enough to talk to the aforementioned
'uefisecapp'.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230827211408.689076-3-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 3a99f121fe0b ("firmware: qcom: scm: Introduce pas_metadata
context") left out the `extern` specifier for the API it introduced, so
add it.
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Link: https://lore.kernel.org/r/bce25c8e215f7cfc7b0780d6965d09f5efe1cc5f.1690503893.git.quic_gurus@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.
Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k)
Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com
|
|
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
|
