| Age | Commit message (Collapse) | Author |
|---|
|
BPF hash map may now use the map_check_btf() callback to decide whether
to set a dtor on its bpf_mem_alloc or not. Unlike C++ where members can
opt out of const-ness using mutable, we must lose the const qualifier on
the callback such that we can avoid the ugly cast. Make the change and
adjust all existing users, and lose the comment in hashtab.c.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Implement fsession support in the arm64 BPF JIT trampoline.
Extend the trampoline stack layout to store function metadata and
session cookies, and pass the appropriate metadata to fentry and
fexit programs. This mirrors the existing x86 behavior and enables
session cookies on arm64.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Following changes need to lookup trampoline based on its ip address,
adding hash table for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-8-jolsa@kernel.org
|
|
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement session cookie for fsession. The session cookies will be stored
in the stack, and the layout of the stack will look like this:
return value -> 8 bytes
argN -> 8 bytes
...
arg1 -> 8 bytes
nr_args -> 8 bytes
ip (optional) -> 8 bytes
cookie2 -> 8 bytes
cookie1 -> 8 bytes
The offset of the cookie for the current bpf program, which is in 8-byte
units, is stored in the
"(((u64 *)ctx)[-1] >> BPF_TRAMP_COOKIE_INDEX_SHIFT) & 0xFF". Therefore, we
can get the session cookie with ((u64 *)ctx)[-offset].
Implement and inline the bpf_session_cookie() for the fsession in the
verifier.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If fsession exists, we will use the bit (1 << BPF_TRAMP_IS_RETURN_SHIFT)
in ((u64 *)ctx)[-1] to store the "is_return" flag.
The logic of bpf_session_is_return() for fsession is implemented in the
verifier by inline following code:
bool bpf_session_is_return(void *ctx)
{
return (((u64 *)ctx)[-1] >> BPF_TRAMP_IS_RETURN_SHIFT) & 1;
}
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The fsession is something that similar to kprobe session. It allow to
attach a single BPF program to both the entry and the exit of the target
functions.
Introduce the struct bpf_fsession_link, which allows to add the link to
both the fentry and fexit progs_hlist of the trampoline.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
percpu_cgroup_storage maps
Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to
allow updating values for all CPUs with a single value for update_elem
API.
Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to
allow:
* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.
The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-6-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
lru_percpu_hash maps
Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash
maps to allow updating values for all CPUs with a single value for both
update_elem and update_batch APIs.
Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash
maps to allow:
* update value for specified CPU for both update_elem and update_batch
APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch
APIs.
The BPF_F_CPU flag is passed via:
* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce support for the BPF_F_ALL_CPUS flag in percpu_array maps to
allow updating values for all CPUs with a single value for both
update_elem and update_batch APIs.
Introduce support for the BPF_F_CPU flag in percpu_array maps to allow:
* update value for specified CPU for both update_elem and update_batch
APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch
APIs.
The BPF_F_CPU flag is passed via:
* map_flags of lookup_elem and update_elem APIs along with embedded cpu
info.
* elem_flags of lookup_batch and update_batch APIs along with embedded
cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for
following APIs:
* 'map_lookup_elem()'
* 'map_update_elem()'
* 'generic_map_lookup_batch()'
* 'generic_map_update_batch()'
And, get the correct value size for these APIs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The __opt annotation was originally introduced specifically for
buffer/size argument pairs in bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr(), allowing the buffer pointer to be NULL while
still validating the size as a constant. The __nullable annotation
serves the same purpose but is more general and is already used
throughout the BPF subsystem for raw tracepoints, struct_ops, and other
kfuncs.
This patch unifies the two annotations by replacing __opt with
__nullable. The key change is in the verifier's
get_kfunc_ptr_arg_type() function, where mem/size pair detection is now
performed before the nullable check. This ensures that buffer/size
pairs are correctly classified as KF_ARG_PTR_TO_MEM_SIZE even when the
buffer is nullable, while adding an !arg_mem_size condition to the
nullable check prevents interference with mem/size pair handling.
When processing KF_ARG_PTR_TO_MEM_SIZE arguments, the verifier now uses
is_kfunc_arg_nullable() instead of the removed is_kfunc_arg_optional()
to determine whether to skip size validation for NULL buffers.
This is the first documentation added for the __nullable annotation,
which has been in use since it was introduced but was previously
undocumented.
No functional changes to verifier behavior - nullable buffer/size pairs
continue to work exactly as before.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102221513.1961781-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_map_memcg_enter() and bpf_map_memcg_exit() helpers to
reduce code duplication in memcg context management.
bpf_map_memcg_enter() gets the memcg from the map, sets it as active,
and returns both the previous and the now active memcg.
bpf_map_memcg_exit() restores the previous active memcg and releases the
reference obtained during enter.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102200230.25168-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that KF_TRUSTED_ARGS is the default for all kfuncs, remove the
explicit KF_TRUSTED_ARGS flag from all kfunc definitions and remove the
flag itself.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102180038.2708325-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make arena related kfuncs any context safe by the following changes:
bpf_arena_alloc_pages() and bpf_arena_reserve_pages():
Replace the usage of the mutex with a rqspinlock for range tree and use
kmalloc_nolock() wherever needed. Use free_pages_nolock() to free pages
from any context.
apply_range_set/clear_cb() with apply_to_page_range() has already made
populating the vm_area in bpf_arena_alloc_pages() any context safe.
bpf_arena_free_pages(): defer the main logic to a workqueue if it is
called from a non-sleepable context.
specialize_kfunc() is used to replace the sleepable arena_free_pages()
with bpf_arena_free_pages_non_sleepable() when the verifier detects the
call is from a non-sleepable context.
In the non-sleepable case, arena_free_pages() queues the address and the
page count to be freed to a lock-less list of struct arena_free_spans
and raises an irq_work. The irq_work handler calls schedules_work() as
it is safe to be called from irq context. arena_free_worker() (the work
queue handler) iterates these spans and clears ptes, flushes tlb, zaps
pages, and calls __free_page().
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251222195022.431211-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF programs detect recursion using a per-CPU 'active' flag in struct
bpf_prog. The trampoline currently sets/clears this flag with atomic
operations.
On some arm64 platforms (e.g., Neoverse V2 with LSE), per-CPU atomic
operations are relatively slow. Unlike x86_64 - where per-CPU updates
can avoid cross-core atomicity, arm64 LSE atomics are always atomic
across all cores, which is unnecessary overhead for strictly per-CPU
state.
This patch removes atomics from the recursion detection path on arm64 by
changing 'active' to a per-CPU array of four u8 counters, one per
context: {NMI, hard-irq, soft-irq, normal}. The running context uses a
non-atomic increment/decrement on its element. After increment,
recursion is detected by reading the array as a u32 and verifying that
only the expected element changed; any change in another element
indicates inter-context recursion, and a value > 1 in the same element
indicates same-context recursion.
For example, starting from {0,0,0,0}, a normal-context trigger changes
the array to {0,0,0,1}. If an NMI arrives on the same CPU and triggers
the program, the array becomes {1,0,0,1}. When the NMI context checks
the u32 against the expected mask for normal (0x00000001), it observes
0x01000001 and correctly reports recursion. Same-context recursion is
detected analogously.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF programs detect recursion by doing atomic inc/dec on a per-cpu
active counter from the trampoline. Create two helpers for operations on
this active counter, this makes it easy to changes the recursion
detection logic in future.
This commit makes no functional changes.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a bpf_has_frame_pointer() helper that unwinders can call to
determine whether a given instruction pointer is within the valid frame
pointer region of a BPF JIT program or trampoline (i.e., after the
prologue, before the epilogue).
This will enable livepatch (with the ORC unwinder) to reliably unwind
through BPF JIT frames.
Acked-by: Song Liu <song@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fd2bc5b4e261a680774b28f6100509fd5ebad2f0.1764818927.git.jpoimboe@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
|
|
Add a new BPF command BPF_PROG_ASSOC_STRUCT_OPS to allow associating
a BPF program with a struct_ops map. This command takes a file
descriptor of a struct_ops map and a BPF program and set
prog->aux->st_ops_assoc to the kdata of the struct_ops map.
The command does not accept a struct_ops program nor a non-struct_ops
map. Programs of a struct_ops map is automatically associated with the
map during map update. If a program is shared between two struct_ops
maps, prog->aux->st_ops_assoc will be poisoned to indicate that the
associated struct_ops is ambiguous. The pointer, once poisoned, cannot
be reset since we have lost track of associated struct_ops. For other
program types, the associated struct_ops map, once set, cannot be
changed later. This restriction may be lifted in the future if there is
a use case.
A kernel helper bpf_prog_get_assoc_struct_ops() can be used to retrieve
the associated struct_ops pointer. The returned pointer, if not NULL, is
guaranteed to be valid and point to a fully updated struct_ops struct.
For struct_ops program reused in multiple struct_ops map, the return
will be NULL.
prog->aux->st_ops_assoc is protected by bumping the refcount for
non-struct_ops programs and RCU for struct_ops programs. Since it would
be inefficient to track programs associated with a struct_ops map, every
non-struct_ops program will bump the refcount of the map to make sure
st_ops_assoc stays valid. For a struct_ops program, it is protected by
RCU as map_free will wait for an RCU grace period before disassociating
the program with the map. The helper must be called in BPF program
context or RCU read-side critical section.
struct_ops implementers should note that the struct_ops returned may not
be initialized nor attached yet. The struct_ops implementer will be
responsible for tracking and checking the state of the associated
struct_ops map if the use case expects an initialized or attached
struct_ops.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-3-ameryhung@gmail.com
|
|
It is to unify map flags checking for lookup_elem, update_elem,
lookup_batch and update_batch APIs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20251125145857.98134-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the origin logic, the bpf_arch_text_poke() assume that the old and new
instructions have the same opcode. However, they can have different opcode
if we want to replace a "call" insn with a "jmp" insn.
Therefore, add the new function parameter "old_t" along with the "new_t",
which are used to indicate the old and new poke type. Meanwhile, adjust
the implement of bpf_arch_text_poke() for all the archs.
"BPF_MOD_NOP" is added to make the code more readable. In
bpf_arch_text_poke(), we still check if the new and old address is NULL to
determine if nop insn should be used, which I think is more safe.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20251118123639.688444-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the origin call case, if BPF_TRAMP_F_SKIP_FRAME is not set, it means
that the trampoline is not called, but "jmp".
Introduce the function bpf_trampoline_use_jmp() to check if the trampoline
is in "jmp" mode.
Do some adjustment on the "jmp" mode for the x86_64. The main adjustment
that we make is for the stack parameter passing case, as the stack
alignment logic changes in the "jmp" mode without the "rip". What's more,
the location of the parameters on the stack also changes.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20251118123639.688444-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add missing kernel-doc documentation for the cfi_stubs and owner
fields in struct bpf_struct_ops to fix the following warnings:
Warning: include/linux/bpf.h:1931 struct member 'cfi_stubs' not
described in 'bpf_struct_ops'
Warning: include/linux/bpf.h:1931 struct member 'owner' not
described in 'bpf_struct_ops'
The cfi_stubs field was added in commit 2cd3e3772e41 ("x86/cfi,bpf:
Fix bpf_struct_ops CFI") to provide CFI stub functions for trampolines,
and the owner field is used for module reference counting.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251120204620.59571-2-nirbhay.lkd@gmail.com
|
|
Add support for a new instruction
BPF_JMP|BPF_X|BPF_JA, SRC=0, DST=Rx, off=0, imm=0
which does an indirect jump to a location stored in Rx. The register
Rx should have type PTR_TO_INSN. This new type assures that the Rx
register contains a value (or a range of values) loaded from a
correct jump table – map of type instruction array.
For example, for a C switch LLVM will generate the following code:
0: r3 = r1 # "switch (r3)"
1: if r3 > 0x13 goto +0x666 # check r3 boundaries
2: r3 <<= 0x3 # adjust to an index in array of addresses
3: r1 = 0xbeef ll # r1 is PTR_TO_MAP_VALUE, r1->map_ptr=M
5: r1 += r3 # r1 inherits boundaries from r3
6: r1 = *(u64 *)(r1 + 0x0) # r1 now has type INSN_TO_PTR
7: gotox r1 # jit will generate proper code
Here the gotox instruction corresponds to one particular map. This is
possible however to have a gotox instruction which can be loaded from
different maps, e.g.
0: r1 &= 0x1
1: r2 <<= 0x3
2: r3 = 0x0 ll # load from map M_1
4: r3 += r2
5: if r1 == 0x0 goto +0x4
6: r1 <<= 0x3
7: r3 = 0x0 ll # load from map M_2
9: r3 += r1
A: r1 = *(u64 *)(r3 + 0x0)
B: gotox r1 # jump to target loaded from M_1 or M_2
During check_cfg stage the verifier will collect all the maps which
point to inside the subprog being verified. When building the config,
the high 16 bytes of the insn_state are used, so this patch
(theoretically) supports jump tables of up to 2^16 slots.
During the later stage, in check_indirect_jump, it is checked that
the register Rx was loaded from a particular instruction array.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-9-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On bpf(BPF_PROG_LOAD) syscall user-supplied BPF programs are
translated by the verifier into "xlated" BPF programs. During this
process the original instructions offsets might be adjusted and/or
individual instructions might be replaced by new sets of instructions,
or deleted.
Add a new BPF map type which is aimed to keep track of how, for a
given program, the original instructions were relocated during the
verification. Also, besides keeping track of the original -> xlated
mapping, make x86 JIT to build the xlated -> jitted mapping for every
instruction listed in an instruction array. This is required for every
future application of instruction arrays: static keys, indirect jumps
and indirect calls.
A map of the BPF_MAP_TYPE_INSN_ARRAY type must be created with a u32
keys and value of size 8. The values have different semantics for
userspace and for BPF space. For userspace a value consists of two
u32 values – xlated and jitted offsets. For BPF side the value is
a real pointer to a jitted instruction.
On map creation/initialization, before loading the program, each
element of the map should be initialized to point to an instruction
offset within the program. Before the program load such maps should
be made frozen. After the program verification xlated and jitted
offsets can be read via the bpf(2) syscall.
If a tracked instruction is removed by the verifier, then the xlated
offset is set to (u32)-1 which is considered to be too big for a valid
BPF program offset.
One such a map can, obviously, be used to track one and only one BPF
program. If the verification process was unsuccessful, then the same
map can be re-used to verify the program with a different log level.
However, if the program was loaded fine, then such a map, being
frozen in any case, can't be reused by other programs even after the
program release.
Example. Consider the following original and xlated programs:
Original prog: Xlated prog:
0: r1 = 0x0 0: r1 = 0
1: *(u32 *)(r10 - 0x4) = r1 1: *(u32 *)(r10 -4) = r1
2: r2 = r10 2: r2 = r10
3: r2 += -0x4 3: r2 += -4
4: r1 = 0x0 ll 4: r1 = map[id:88]
6: call 0x1 6: r1 += 272
7: r0 = *(u32 *)(r2 +0)
8: if r0 >= 0x1 goto pc+3
9: r0 <<= 3
10: r0 += r1
11: goto pc+1
12: r0 = 0
7: r6 = r0 13: r6 = r0
8: if r6 == 0x0 goto +0x2 14: if r6 == 0x0 goto pc+4
9: call 0x76 15: r0 = 0xffffffff8d2079c0
17: r0 = *(u64 *)(r0 +0)
10: *(u64 *)(r6 + 0x0) = r0 18: *(u64 *)(r6 +0) = r0
11: r0 = 0x0 19: r0 = 0x0
12: exit 20: exit
An instruction array map, containing, e.g., instructions [0,4,7,12]
will be translated by the verifier to [0,4,13,20]. A map with
index 5 (the middle of 16-byte instruction) or indexes greater than 12
(outside the program boundaries) would be rejected.
The functionality provided by this patch will be extended in consequent
patches to implement BPF Static Keys, indirect jumps, and indirect calls.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
File dynptr reads may sleep when the requested folios are not in
the page cache. To avoid sleeping in non-sleepable contexts while still
supporting valid sleepable use, given that dynptrs are non-sleepable by
default, enable sleeping only when bpf_dynptr_from_file() is invoked
from a sleepable context.
This change:
* Introduces a sleepable constructor: bpf_dynptr_from_file_sleepable()
* Override non-sleepable constructor with sleepable if it's always
called in sleepable context
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the necessary verifier plumbing for the new file-backed dynptr type.
Introduce two kfuncs for its lifecycle management:
* bpf_dynptr_from_file() for initialization
* bpf_dynptr_file_discard() for destruction
Currently there is no mechanism for kfunc to release dynptr, this patch
add one:
* Dynptr release function sets meta->release_regno
* Call unmark_stack_slots_dynptr() if meta->release_regno is set and
dynptr ref_obj_id is set as well.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-7-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kernel/bpf/array.c file defines the array_map_get_next_key()
function which finds the next key for array maps. It actually doesn't
use any map fields besides the generic max_entries field. Generalize
it, and export as bpf_array_get_next_key() such that it can be
re-used by other array-like maps.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a new subprog_start field in bpf_prog_aux. This field may
be used by JIT compilers wanting to know the real absolute xlated
offset of the function being jitted. The func_info[func_id] may have
served this purpose, but func_info may be NULL, so JIT compilers
can't rely on it.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251019202145.3944697-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We have many places which open-code what's now is bpf_rcu_lock_held()
macro, so replace all those places with a clean and short macro invocation.
For that, move bpf_rcu_lock_held() macro into include/linux/bpf.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20251014201403.4104511-1-andrii@kernel.org
|
|
bpf_async_cb structures.
The following kmemleak splat:
[ 8.105530] kmemleak: Trying to color unknown object at 0xff11000100e918c0 as Black
[ 8.106521] Call Trace:
[ 8.106521] <TASK>
[ 8.106521] dump_stack_lvl+0x4b/0x70
[ 8.106521] kvfree_call_rcu+0xcb/0x3b0
[ 8.106521] ? hrtimer_cancel+0x21/0x40
[ 8.106521] bpf_obj_free_fields+0x193/0x200
[ 8.106521] htab_map_update_elem+0x29c/0x410
[ 8.106521] bpf_prog_cfc8cd0f42c04044_overwrite_cb+0x47/0x4b
[ 8.106521] bpf_prog_8c30cd7c4db2e963_overwrite_timer+0x65/0x86
[ 8.106521] bpf_prog_test_run_syscall+0xe1/0x2a0
happens due to the combination of features and fixes, but mainly due to
commit 6d78b4473cdb ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
It's using __GFP_HIGH, which instructs slub/kmemleak internals to skip
kmemleak_alloc_recursive() on allocation, so subsequent kfree_rcu()->
kvfree_call_rcu()->kmemleak_ignore() complains with the above splat.
To fix this imbalance, replace bpf_map_kmalloc_node() with
kmalloc_nolock() and kfree_rcu() with call_rcu() + kfree_nolock() to
make sure that the objects allocated with kmalloc_nolock() are freed
with kfree_nolock() rather than the implicit kfree() that kfree_rcu()
uses internally.
Note, the kmalloc_nolock() happens under bpf_spin_lock_irqsave(), so
it will always fail in PREEMPT_RT. This is not an issue at the moment,
since bpf_timers are disabled in PREEMPT_RT. In the future
bpf_spin_lock will be replaced with state machine similar to
bpf_task_work.
Fixes: 6d78b4473cdb ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20251015000700.28988-1-alexei.starovoitov@gmail.com
|
|
The arraymap and hashtab duplicate the logic that checks for and frees
internal structs (timer, workqueue, task_work) based on
BTF record flags. Centralize this by introducing two helpers:
* bpf_map_has_internal_structs(map)
Returns true if the map value contains any of internal structs:
BPF_TIMER | BPF_WORKQUEUE | BPF_TASK_WORK.
* bpf_map_free_internal_structs(map, obj)
Frees the internal structs for a single value object.
Convert arraymap and both the prealloc/malloc hashtab paths to use the
new generic functions. This keeps the functionality for when/how to free
these special fields in one place and makes it easier to add support for
new internal structs in the future without touching every map
implementation.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251010164606.147298-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
./include/linux/bpf.h: crypto/sha2.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=25501
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250926095240.3397539-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The stacktrace map can be easily full, which will lead to failure in
obtaining the stack. In addition to increasing the size of the map,
another solution is to delete the stack_id after looking it up from
the user, so extend the existing bpf_map_lookup_and_delete_elem()
functionality to stacktrace map types.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-1-chen.dylane@linux.dev
|
|
Currently uprobe (BPF_PROG_TYPE_KPROBE) program can't write to the
context registers data. While this makes sense for kprobe attachments,
for uprobe attachment it might make sense to be able to change user
space registers to alter application execution.
Since uprobe and kprobe programs share the same type (BPF_PROG_TYPE_KPROBE),
we can't deny write access to context during the program load. We need
to check on it during program attachment to see if it's going to be
kprobe or uprobe.
Storing the program's write attempt to context and checking on it
during the attachment.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, functions with 'union' arguments cannot be traced with
fentry/fexit:
bpftrace -e 'fentry:release_pages { exit(); }' -v
The function release_pages arg0 type UNION is unsupported.
The type of the 'release_pages' arg0 is defined as:
typedef union {
struct page **pages;
struct folio **folios;
struct encoded_page **encoded_pages;
} release_pages_arg __attribute__ ((__transparent_union__));
This patch relaxes the restriction by allowing function arguments of type
'union' to be traced in verifier.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250919044110.23729-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds necessary plumbing in verifier, syscall and maps to
support handling new kfunc bpf_task_work_schedule and kernel structure
bpf_task_work. The idea is similar to how we already handle bpf_wq and
bpf_timer.
verifier changes validate calls to bpf_task_work_schedule to make sure
it is safe and expected invariants hold.
btf part is required to detect bpf_task_work structure inside map value
and store its offset, which will be used in the next patch to calculate
key and value addresses.
arraymap and hashtab changes are needed to handle freeing of the
bpf_task_work: run code needed to deinitialize it, for example cancel
task_work callback if possible.
The use of bpf_task_work and proper implementation for kfuncs are
introduced in the next patch.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250923112404.668720-6-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
No functional changes, except for the addition of the headers for the
kfuncs so that they can be used for signature verification.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-8-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently only array maps are supported, but the implementation can be
extended for other maps and objects. The hash is memoized only for
exclusive and frozen maps as their content is stable until the exclusive
program modifies the map.
This is required for BPF signing, enabling a trusted loader program to
verify a map's integrity. The loader retrieves
the map's runtime hash from the kernel and compares it against an
expected hash computed at build time.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-7-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Exclusive maps allow maps to only be accessed by program with a
program with a matching hash which is specified in the excl_prog_hash
attr.
For the signing use-case, this allows the trusted loader program
to load the map and verify the integrity
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-3-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Exclusive maps restrict map access to specific programs using a hash.
The current hash used for this is SHA1, which is prone to collisions.
This patch uses SHA256, which is more resilient against
collisions. This new hash is stored in bpf_prog and used by the verifier
to determine if a program can access a given exclusive map.
The original 64-bit tags are kept, as they are used by users as a short,
possibly colliding program identifier for non-security purposes.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-2-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Begin reporting arena page faults and the faulting address to BPF
program's stderr, this patch adds support in the arm64 and x86-64 JITs,
support for other archs can be added later.
The fault handlers receive the 32 bit address in the arena region so
the upper 32 bits of user_vm_start is added to it before printing the
address. This is what the user would expect to see as this is what is
printed by bpf_printk() is you pass it an address returned by
bpf_arena_alloc_pages();
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250911145808.58042-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF streams are only valid for the main programs, to make it easier to
access streams from subprogs, introduce main_prog_aux in struct
bpf_prog_aux.
prog->aux->main_prog_aux = prog->aux, for main programs and
prog->aux->main_prog_aux = main_prog->aux, for subprograms.
Make bpf_prog_find_from_stack() use the added main_prog_aux to return
the mainprog when a subprog is found on the stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge 'skb-meta-dynptr' branch into 'master' branch. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
