summaryrefslogtreecommitdiff
path: root/drivers/net/usb/usbnet.c
AgeCommit message (Collapse)Author
2026-03-06qmi_wwan: allow max_mtu above hard_mtu to control rx_urb_sizeLaurent Vivier
Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu") capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While this correctly prevents oversized packets on standard USB network devices, it breaks the qmi_wwan driver. qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on the wwan0 interface to configure rx_urb_size via usbnet_change_mtu(). QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and the USB receive buffers must be sized accordingly. With max_mtu capped to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the receive buffers remain small, and download speeds drop from >300 Mbps to ~0.8 Mbps. Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's driver_info structures to restore the previous behavior for QMI devices, while keeping the safety fix in place for all other usbnet drivers. Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/ Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Tested-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-12Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ...
2026-02-03net: usb: introduce usbnet_mii_ioctl helper functionEthan Nelson-Moore
Many USB network drivers use identical code to pass ioctl requests on to the MII layer. Reduce code duplication by refactoring this code into a helper function. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> (v1) Reviewed-by: Andrew Lunn <andrew@lunn.ch> (v3) Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260203013517.26170-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-20kernel.h: drop hex.h and update all hex.h usersRandy Dunlap
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of hex.h interfaces to directly #include <linux/hex.h> as part of the process of putting kernel.h on a diet. Removing hex.h from kernel.h means that 36K C source files don't have to pay the price of parsing hex.h for the roughly 120 C source files that need it. This change has been build-tested with allmodconfig on most ARCHes. Also, all users/callers of <linux/hex.h> in the entire source tree have been updated if needed (if not already #included). Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20usbnet: limit max_mtu based on device's hard_mtuLaurent Vivier
The usbnet driver initializes net->max_mtu to ETH_MAX_MTU before calling the device's bind() callback. When the bind() callback sets dev->hard_mtu based the device's actual capability (from CDC Ethernet's wMaxSegmentSize descriptor), max_mtu is never updated to reflect this hardware limitation). This allows userspace (DHCP or IPv6 RA) to configure MTU larger than the device can handle, leading to silent packet drops when the backend sends packet exceeding the device's buffer size. Fix this by limiting net->max_mtu to the device's hard_mtu after the bind callback returns. See https://gitlab.com/qemu-project/qemu/-/issues/3268 and https://bugs.passt.top/attachment.cgi?bugid=189 Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://bugs.passt.top/show_bug.cgi?id=189 Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Link: https://patch.msgid.link/20260119075518.2774373-1-lvivier@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-15usbnet: fix crash due to missing BQL accounting after resumeSimon Schippers
In commit 7ff14c52049e ("usbnet: Add support for Byte Queue Limits (BQL)"), it was missed that usbnet_resume() may enqueue SKBs using __skb_queue_tail() without reporting them to BQL. As a result, the next call to netdev_completed_queue() triggers a BUG_ON() in dql_completed(), since the SKBs queued during resume were never accounted for. This patch fixes the issue by adding a corresponding netdev_sent_queue() call in usbnet_resume() when SKBs are queued after suspend. Because dev->txq.lock is held at this point, no concurrent calls to netdev_sent_queue() from usbnet_start_xmit() can occur. The crash can be reproduced by generating network traffic (e.g. iperf3 -c ... -t 0), suspending the system, and then waking it up (e.g. rtcwake -m mem -s 5). When testing USB2 Android tethering (cdc_ncm), the system crashed within three suspend/resume cycles without this patch. With the patch applied, no crashes were observed after 90 cycles. Testing with an AX88179 USB Ethernet adapter also showed no crashes. Fixes: 7ff14c52049e ("usbnet: Add support for Byte Queue Limits (BQL)") Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com> Tested-by: Simon Schippers <simon.schippers@tu-dortmund.de> Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260113075139.6735-1-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-29usbnet: avoid a possible crash in dql_completed()Eric Dumazet
syzbot reported a crash [1] in dql_completed() after recent usbnet BQL adoption. The reason for the crash is that netdev_reset_queue() is called too soon. It should be called after cancel_work_sync(&dev->bh_work) to make sure no more TX completion can happen. [1] kernel BUG at lib/dynamic_queue_limits.c:99 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 5197 Comm: udevd Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:dql_completed+0xbe1/0xbf0 lib/dynamic_queue_limits.c:99 Call Trace: <IRQ> netdev_tx_completed_queue include/linux/netdevice.h:3864 [inline] netdev_completed_queue include/linux/netdevice.h:3894 [inline] usbnet_bh+0x793/0x1020 drivers/net/usb/usbnet.c:1601 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 bh_worker+0x2b1/0x600 kernel/workqueue.c:3611 tasklet_action+0xc/0x70 kernel/softirq.c:952 handle_softirqs+0x27d/0x850 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] invoke_softirq kernel/softirq.c:496 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:723 irq_exit_rcu+0x9/0x30 kernel/softirq.c:739 Fixes: 7ff14c52049e ("usbnet: Add support for Byte Queue Limits (BQL)") Reported-by: syzbot+5b55e49f8bbd84631a9c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6945644f.a70a0220.207337.0113.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Simon Schippers <simon.schippers@tu-dortmund.de> Link: https://patch.msgid.link/20251219144459.692715-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-11-13net: usb: usbnet: adhere to styleOliver Neukum
This satisfies the coding style. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20251112102610.281565-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-10usbnet: Add support for Byte Queue Limits (BQL)Simon Schippers
In the current implementation, usbnet uses a fixed tx_qlen of: USB2: 60 * 1518 bytes = 91.08 KB USB3: 60 * 5 * 1518 bytes = 454.80 KB Such large transmit queues can be problematic, especially for cellular modems. For example, with a typical celluar link speed of 10 Mbit/s, a fully occupied USB3 transmit queue results in: 454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms of additional latency. This patch adds support for Byte Queue Limits (BQL) [1] to dynamically manage the transmit queue size and reduce latency without sacrificing throughput. Testing was performed on various devices using the usbnet driver for packet transmission: - DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a) - DELOCK 61969: USB2 to 1 GbE adapter (asix) - Quectel RM520: 5G modem (qmi_wwan) - USB2 Android tethering (cdc_ncm) No performance degradation was observed for iperf3 TCP or UDP traffic, while latency for a prioritized ping application was significantly reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully utilized by iperf3 UDP traffic, the prioritized ping was improved from 1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet connection, the prioritized ping was improved from 35 ms to 5 ms. [1] https://lwn.net/Articles/469652/ Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.18-rc4). No conflicts, adjacent changes: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU") 26ab9830beab ("net: stmmac: replace has_xxxx with core_type") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-24net: usb: usbnet: coding style for functionsOliver Neukum
Functions are not to have blanks between names and parameter lists. Remove them. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20251023100136.909118-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-23usbnet: Prevents free active keventLizhi Xu
The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev(). Fixes: a69e617e533e ("usbnet: Fix linkwatch use-after-free on disconnect") Reported-by: Sam Sun <samsun1006219@gmail.com> Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-14usbnet: Fix using smp_processor_id() in preemptible code warningsZqiang
Syzbot reported the following warning: BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879 caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49 usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708 usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417 __dev_set_mtu net/core/dev.c:9443 [inline] netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496 netif_set_mtu+0xb0/0x160 net/core/dev.c:9520 dev_set_mtu+0xae/0x170 net/core/dev_api.c:247 dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572 dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821 sock_do_ioctl+0x19d/0x280 net/socket.c:1204 sock_ioctl+0x42f/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f For historical and portability reasons, the netif_rx() is usually run in the softirq or interrupt context, this commit therefore add local_bh_disable/enable() protection in the usbnet_resume_rx(). Fixes: 43daa96b166c ("usbnet: Stop RX Q on MTU change") Link: https://syzkaller.appspot.com/bug?id=81f55dfa587ee544baaaa5a359a060512228c1e1 Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Zqiang <qiang.zhang@linux.dev> Link: https://patch.msgid.link/20251011070518.7095-1-qiang.zhang@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-06net: usbnet: Fix the wrong netif_carrier_on() callAmmar Faizi
The commit referenced in the Fixes tag causes usbnet to malfunction (identified via git bisect). Post-commit, my external RJ45 LAN cable fails to connect. Linus also reported the same issue after pulling that commit. The code has a logic error: netif_carrier_on() is only called when the link is already on. Fix this by moving the netif_carrier_on() call outside the if-statement entirely. This ensures it is always called when EVENT_LINK_CARRIER_ON is set and properly clears it regardless of the link state. Cc: stable@vger.kernel.org Cc: Armando Budianto <sprite@gnuweeb.org> Reviewed-by: Simon Horman <horms@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c 1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().") 13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.") 03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries") Adjacent changes: drivers/net/usb/usbnet.c 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") net/ipv6/route.c 31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings") 1caf27297215 ("ipv6: adopt dst_dev() helper") 3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25usbnet: Set duplex status to unknown in the absence of MIIYi Cong
Currently, USB CDC devices that do not use MDIO to get link status have their duplex mode set to half-duplex by default. However, since the CDC specification does not define a duplex status, this can be misleading. This patch changes the default to DUPLEX_UNKNOWN in the absence of MII, which more accurately reflects the state of the link and avoids implying an incorrect or error state. Link: https://lore.kernel.org/all/20250723152151.70a8034b@kernel.org/ Signed-off-by: Yi Cong <yicong@kylinos.cn> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250724013133.1645142-1-yicongsrfy@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25net: usbnet: Avoid potential RCU stall on LINK_CHANGE eventJohn Ernberg
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link up and down events when the WWAN interface is activated on the modem-side. Interrupt URBs will in consecutive polls grab: * Link Connected * Link Disconnected * Link Connected Where the last Connected is then a stable link state. When the system is under load this may cause the unlink_urbs() work in __handle_link_change() to not complete before the next usbnet_link_change() call turns the carrier on again, allowing rx_submit() to queue new SKBs. In that event the URB queue is filled faster than it can drain, ending up in a RCU stall: rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 Call trace: arch_local_irq_enable+0x4/0x8 local_bh_enable+0x18/0x20 __netdev_alloc_skb+0x18c/0x1cc rx_submit+0x68/0x1f8 [usbnet] rx_alloc_submit+0x4c/0x74 [usbnet] usbnet_bh+0x1d8/0x218 [usbnet] usbnet_bh_tasklet+0x10/0x18 [usbnet] tasklet_action_common+0xa8/0x110 tasklet_action+0x2c/0x34 handle_softirqs+0x2cc/0x3a0 __do_softirq+0x10/0x18 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 __irq_exit_rcu+0xa8/0xb8 irq_exit_rcu+0xc/0x30 el1_interrupt+0x34/0x48 el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x38/0x48 xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd] unlink1+0xd4/0xdc [usbcore] usb_hcd_unlink_urb+0x70/0xb0 [usbcore] usb_unlink_urb+0x24/0x44 [usbcore] unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet] __handle_link_change+0x34/0x70 [usbnet] usbnet_deferred_kevent+0x1c0/0x320 [usbnet] process_scheduled_works+0x2d0/0x48c worker_thread+0x150/0x1dc kthread+0xd8/0xe8 ret_from_fork+0x10/0x20 Get around the problem by delaying the carrier on to the scheduled work. This needs a new flag to keep track of the necessary action. The carrier ok check cannot be removed as it remains required for the LINK_RESET event flow. Fixes: 4b49f58fff00 ("usbnet: handle link change") Cc: stable@vger.kernel.org Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-21net: usb: Remove duplicate assignments for net->pcpu_stat_typeZqiang
This commit remove duplicate assignments for net->pcpu_stat_type in usbnet_probe(). Signed-off-by: Zqiang <qiang.zhang@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-09net: usb: enable the work after stop usbnet by ip down/upZqiang
Oleksij reported that: The smsc95xx driver fails after one down/up cycle, like this: $ nmcli device set enu1u1 managed no $ p a a 10.10.10.1/24 dev enu1u1 $ ping -c 4 10.10.10.3 $ ip l s dev enu1u1 down $ ip l s dev enu1u1 up $ ping -c 4 10.10.10.3 The second ping does not reach the host. Networking also fails on other interfaces. Enable the work by replacing the disable_work_sync() with cancel_work_sync(). [Jun Miao: completely write the commit changelog] Fixes: 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Zqiang <qiang.zhang@linux.dev> Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250708081653.307815-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: Convert tasklet API to new bottom half workqueue mechanismJun Miao
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the usbnet driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-04usbnet:fix NPE during rx_completeYing Lu
Missing usbnet_going_away Check in Critical Path. The usb_submit_urb function lacks a usbnet_going_away validation, whereas __usbnet_queue_skb includes this check. This inconsistency creates a race condition where: A URB request may succeed, but the corresponding SKB data fails to be queued. Subsequent processes: (e.g., rx_complete → defer_bh → __skb_unlink(skb, list)) attempt to access skb->next, triggering a NULL pointer dereference (Kernel Panic). Fixes: 04e906839a05 ("usbnet: fix cyclical race on disconnect with work queue") Cc: stable@vger.kernel.org Signed-off-by: Ying Lu <luying1@xiaomi.com> Link: https://patch.msgid.link/4c9ef2efaa07eb7f9a5042b74348a67e5a3a7aea.1743584159.git.luying1@xiaomi.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-28net: usb: usbnet: restore usb%d name exception for local mac addressesDominique Martinet
commit 8a7d12d674ac ("net: usb: usbnet: fix name regression") assumed that local addresses always came from the kernel, but some devices hand out local mac addresses so we ended up with point-to-point devices with a mac set by the driver, renaming to eth%d when they used to be named usb%d. Userspace should not rely on device name, but for the sake of stability restore the local mac address check portion of the naming exception: point to point devices which either have no mac set by the driver or have a local mac handed out by the driver will keep the usb%d name. (some USB LTE modems are known to hand out a stable mac from the locally administered range; that mac appears to be random (different for mulitple devices) and can be reset with device-specific commands, so while such devices would benefit from getting a OUI reserved, we have to deal with these and might as well preserve the existing behavior to avoid breaking fragile openwrt configurations and such on upgrade.) Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org Fixes: 8a7d12d674ac ("net: usb: usbnet: fix name regression") Cc: stable@vger.kernel.org Tested-by: Ahmed Naseef <naseefkm@gmail.com> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-22net: usb: usbnet: fix name regressionOliver Neukum
The fix for MAC addresses broke detection of the naming convention because it gave network devices no random MAC before bind() was called. This means that the check for the local assignment bit was always negative as the address was zeroed from allocation, instead of from overwriting the MAC with a unique hardware address. The correct check for whether bind() has altered the MAC is done with is_zero_ether_addr Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Greg Thelen <gthelen@google.com> Diagnosed-by: John Sperbeck <jsperbeck@google.com> Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC") Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-15net: usb: usbnet: fix race in probe failureOliver Neukum
The same bug as in the disconnect code path also exists in the case of a failure late during the probe process. The flag must also be set. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20241010131934.1499695-1-oneukum@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-26usbnet: fix cyclical race on disconnect with work queueOliver Neukum
The work can submit URBs and the URBs can schedule the work. This cycle needs to be broken, when a device is to be stopped. Use a flag to do so. This is a design issue as old as the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03usbnet: modern method to get random MACOliver Neukum
The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net: usb: qmi_wwan: Leverage core stats allocatorBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the qmi_wwan driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240409133307.2058099-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07net: usbnet: Remove generic .ndo_get_stats64Breno Leitao
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240306142643.2429409-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07net: usbnet: Leverage core stats allocatorBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the usbnet driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240306142643.2429409-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: usbnet: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the wlan_type and wwan_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urbAlan Stern
The syzbot fuzzer identified a problem in the usbnet driver: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc9000463f568 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001 RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003 R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0 Call Trace: <TASK> usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3578 [inline] dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594 ... This bug is caused by the fact that usbnet trusts the bulk endpoint addresses its probe routine receives in the driver_info structure, and it does not check to see that these endpoints actually exist and have the expected type and directions. The fix is simply to add such a check. Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-09usbnet: optimize usbnet_bh() to reduce CPU loadLeesoo Ahn
The current source pushes skb into dev-done queue by calling skb_dequeue_tail() and then pop it by skb_dequeue() to branch to rx_cleanup state for freeing urb/skb in usbnet_bh(). It takes extra CPU load, 2.21% (skb_queue_tail) as follows, - 11.58% 0.26% swapper [k] usbnet_bh - 11.32% usbnet_bh - 6.43% skb_dequeue 6.34% _raw_spin_unlock_irqrestore - 2.21% skb_queue_tail 2.19% _raw_spin_unlock_irqrestore - 1.68% consume_skb - 0.97% kfree_skbmem 0.80% kmem_cache_free 0.53% skb_release_data To reduce the extra CPU load use return values to call helper function usb_free_skb() to free the resources instead of calling skb_queue_tail() and skb_dequeue() for push and pop respectively. - 7.87% 0.25% swapper [k] usbnet_bh - 7.62% usbnet_bh - 4.81% skb_dequeue 4.74% _raw_spin_unlock_irqrestore - 1.75% consume_skb - 0.98% kfree_skbmem 0.78% kmem_cache_free 0.58% skb_release_data 0.53% smsc95xx_rx_fixup Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-26usbnet: Fix memory leak in usbnet_disconnect()Peilin Ye
Currently usbnet_disconnect() unanchors and frees all deferred URBs using usb_scuttle_anchored_urbs(), which does not free urb->context, causing a memory leak as reported by syzbot. Use a usb_get_from_anchor() while loop instead, similar to what we did in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"). Also free urb->sg. Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices") Fixes: 638c5115a794 ("USBNET: support DMA SG") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net: usb: delete extra space and tab in blank lineXie Shaowen
delete extra space and tab in blank line, there is no functional change. Signed-off-by: Xie Shaowen <studentxswpy@163.com> Link: https://lore.kernel.org/r/20220727081253.3043941-1-studentxswpy@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06usbnet: fix memory leak in error caseOliver Neukum
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01usbnet: remove vestiges of debug macrosOliver Neukum
The driver has long since be converted to dynamic debugging. The internal compile options for more debugging can simply be deleted. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220630110741.21314-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c 9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices") fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29usbnet: fix memory allocation in helpersOliver Neukum
usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers. Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-24usbnet: Fix linkwatch use-after-free on disconnectLukas Wunner
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may sleep. On disconnect, completion of the work was originally awaited in ->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock": https://git.kernel.org/tglx/history/c/0f138bbfd83c The change was made because back then, the kernel's workqueue implementation did not allow waiting for a single work. One had to wait for completion of *all* work by calling flush_scheduled_work(), and that could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex held in ->ndo_stop(). The commit solved one problem but created another: It causes a use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c, ax88179_178a.c, ch9200.c and smsc75xx.c: * If the drivers receive a link change interrupt immediately before disconnect, they raise EVENT_LINK_RESET in their (non-sleepable) ->status() callback and schedule usbnet_deferred_kevent(). * usbnet_deferred_kevent() invokes the driver's ->link_reset() callback, which calls netif_carrier_{on,off}(). * That in turn schedules the work linkwatch_event(). Because usbnet_deferred_kevent() is awaited after unregister_netdev(), netif_carrier_{on,off}() may operate on an unregistered netdev and linkwatch_event() may run after free_netdev(), causing a use-after-free. In 2010, usbnet was changed to only wait for a single instance of usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf ("drivers/net: don't use flush_scheduled_work()"). Unfortunately the commit neglected to move the wait back to ->ndo_stop(). Rectify that omission at long last. Reported-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/netdev/CAG48ez0MHBbENX5gCdHAUXZ7h7s20LnepBF-pa5M=7Bi-jZrEA@mail.gmail.com/ Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/netdev/20220315113841.GA22337@pengutronix.de/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/d1c87ebe9fc502bffcd1576e238d685ad08321e4.1655987888.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09net: adopt u64_stats_t in struct pcpu_sw_netstatsEric Dumazet
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-03Merge tag 'usb-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver changes for 5.18-rc1. For the most part it's been a quiet development cycle for the USB core, but there are the usual "hot spots" of development activity. Included in here are: - Thunderbolt driver updates: - fixes for devices without displayport adapters - lane bonding support and improvements - other minor changes based on device testing - dwc3 gadget driver changes. It seems this driver will never be finished given that the IP core is showing up in zillions of new devices and each implementation decides to do something different with it... - uvc gadget driver updates as more devices start to use and rely on this hardware as well - usb_maxpacket() api changes to remove an unneeded and unused parameter. - usb-serial driver device id updates and small cleanups - typec cleanups and fixes based on device testing - device tree updates for usb properties - lots of other small fixes and driver updates. All of these have been in linux-next for weeks with no reported problems" * tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) USB: new quirk for Dell Gen 2 devices usb: dwc3: core: Add error log when core soft reset failed usb: dwc3: gadget: Move null pinter check to proper place usb: hub: Simplify error and success path in port_over_current_notify usb: cdns3: allocate TX FIFO size according to composite EP number usb: dwc3: Fix ep0 handling when getting reset while doing control transfer usb: Probe EHCI, OHCI controllers asynchronously usb: isp1760: Fix out-of-bounds array access xhci: Don't defer primary roothub registration if there is only one roothub USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI xhci: Remove quirk for over 10 year old evaluation hardware xhci: prevent U2 link power state if Intel tier policy prevented U1 xhci: use generic command timer for stop endpoint commands. usb: host: xhci-plat: omit shared hcd if either root hub has no ports usb: host: xhci-plat: prepare operation w/o shared hcd usb: host: xhci-plat: create shared hcd after having added main hcd xhci: prepare for operation w/o shared hcd xhci: factor out parts of xhci_gen_setup() ...
2022-05-13usbnet: Run unregister_netdev() before unbind() againLukas Wunner
Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop(). Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514 Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: Martyn Welch <martyn.welch@collabora.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23net: remove third argument of usb_maxpacket()Vincent Mailhol
The third argument of usb_maxpacket(): in_out has been deprecated because it could be derived from the second argument (e.g. using usb_pipeout(pipe)). N.B. function usb_maxpacket() was made variadic to accommodate the transition from the old prototype with three arguments to the new one with only two arguments (so that no renaming is needed). The variadic argument is to be removed once all users of usb_maxpacket() get migrated. CC: Oliver Neukum <oliver@neukum.org> CC: David S. Miller <davem@davemloft.net> CC: Jakub Kicinski <kuba@kernel.org> CC: Woojung Huh <woojung.huh@microchip.com> CC: Felix Fietkau <nbd@nbd.name> CC: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> CC: Ryder Lee <ryder.lee@mediatek.com> CC: Kalle Valo <kvalo@kernel.org> CC: Matthias Brugger <matthias.bgg@gmail.com> CC: Stanislaw Gruszka <stf_xl@wp.pl> CC: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20220317035514.6378-6-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-05 08:01:22 +0000