| Age | Commit message (Collapse) | Author |
|---|
|
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DesignWare I3C master driver creates a virtual I2C adapter to
provide backward compatibility with I2C devices. However, the current
implementation does not associate this virtual adapter with any
Device Tree node.
Propagate the of_node from the I3C master platform device to the
virtual I2C adapter's device structure. This ensures that standard
I2C aliases are correctly resolved and bus numbering remains consistent.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260302075645.1492766-1-peteryin.openbmc@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Disruption of the MIPI I3C HCI controller's internal state can cause
i3c_hci_bus_disable() to fail when attempting to shut down the bus.
In the code paths where bus disable is invoked - bus clean-up and runtime
suspend - the controller does not need to remain operational afterward, so
a full controller reset is a safe recovery mechanism.
Add a fallback to issue a software reset when disabling the bus fails.
This ensures the bus is reliably halted even if the controller's state
machine is stuck or unresponsive.
The fallback is used both during bus clean-up and in the runtime suspend
path. In the latter case, ensure interrupts are quiesced after reset.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Shared interrupts may fire unexpectedly, including during periods when the
controller is not yet fully initialized. Commit b9a15012a1452
("i3c: mipi-i3c-hci: Add optional Runtime PM support") addressed this issue
for the runtime-suspended state, but the same problem can also occur before
the bus is enabled for the first time.
Ensure the IRQ handler ignores interrupts until initialization is complete
by making consistent use of the existing irq_inactive flag. The flag is
now set to false immediately before enabling the bus.
To guarantee correct ordering with respect to the IRQ handler, protect
all transitions of irq_inactive with the same spinlock used inside the
handler.
Fixes: b8460480f62e1 ("i3c: mipi-i3c-hci: Allow for Multi-Bus Instances")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA ring halts whenever a transfer encounters an error. The interrupt
handler previously attempted to detect this situation and restart the ring
if a transfer completed at the same time. However, this restart logic runs
entirely in interrupt context and is inherently racy: it interacts with
other paths manipulating the ring state, and fully serializing it within
the interrupt handler is not practical.
Move this error-recovery logic out of the interrupt handler and into the
transfer-processing path (i3c_hci_process_xfer()), where serialization and
state management are already controlled. Introduce a new optional I/O-ops
callback, handle_error(), invoked when a completed transfer reports an
error. For DMA operation, the implementation simply calls the existing
dequeue function, which safely aborts and restarts the ring when needed.
This removes the fragile ring-restart logic from the interrupt handler and
centralizes error handling where proper sequencing can be ensured.
Fixes: ccdb2e0e3b00d ("i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Several parts of the MIPI I3C HCI driver duplicate the same sequence for
queuing a transfer, waiting for completion, and handling timeouts. This
logic appears in five separate locations and will be affected by an
upcoming fix.
Refactor the repeated code into a new helper, i3c_hci_process_xfer(), and
store the timeout value in the hci_xfer structure so that callers do not
need to pass it as a separate parameter.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA dequeue path attempts to restart the ring after aborting an
in-flight transfer, but the current sequence is incomplete. The controller
must be brought out of the aborted state and the ring control registers
must be programmed in the correct order: first clearing ABORT, then
re-enabling the ring and asserting RUN_STOP to resume operation.
Add the missing controller resume step and update the ring control writes
so that the ring is restarted using the proper sequence.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The internal control command descriptor used for no-op commands includes a
Transaction ID (TID) field, but the no-op command constructed in
hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a
no-op descriptor without the expected TID.
This bug has gone unnoticed because the TID is currently not validated in
the no-op completion path, but the descriptor format requires it to be
present.
Add the missing TID field when generating a no-op descriptor so that its
layout matches the defined command structure.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA ring bookkeeping in the MIPI I3C HCI driver is updated from two
contexts: the DMA ring dequeue path (hci_dma_dequeue_xfer()) and the
interrupt handler (hci_dma_xfer_done()). Both modify the ring's
in-flight transfer state - specifically rh->src_xfers[] and
xfer->ring_entry - but without any serialization. This allows the two
paths to race, potentially leading to inconsistent ring state.
Serialize access to the shared ring state by extending the existing
spinlock to cover the DMA dequeue path and the entire interrupt handler.
Since the core IRQ handler now holds this lock, remove the per-function
locking from the PIO and DMA sub-handlers.
Additionally, clear the completed entry in rh->src_xfers[] in
hci_dma_xfer_done() so it cannot be matched or completed again.
Finally, place the ring restart sequence under the same lock in
hci_dma_dequeue_xfer() to avoid concurrent enqueue or completion
operations while the ring state is being modified.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The I3C subsystem allows multiple transfers to be queued concurrently.
However, the MIPI I3C HCI driver's DMA enqueue path, hci_dma_queue_xfer(),
lacks sufficient serialization.
In particular, the allocation of the enqueue_ptr and its subsequent update
in the RING_OPERATION1 register, must be done atomically. Otherwise, for
example, it would be possible for 2 transfers to be allocated the same
enqueue_ptr.
Extend the use of the existing spinlock for that purpose. Keep a count of
the number of xfers enqueued so that it is easy to determine if the ring
has enough space.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI driver currently uses separate spinlocks for different
contexts (PIO vs. DMA rings). This split is unnecessary and complicates
upcoming fixes. The driver does not support concurrent PIO and DMA
operation, and it only supports a single DMA ring, so a single lock is
sufficient for all paths.
Introduce a unified spinlock in struct i3c_hci, switch both PIO and DMA
code to use it, and remove the per-context locks.
No functional change is intended in this patch.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for fixing a race in the DMA ring enqueue path when handling
parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer()
and into a new helper that performs the mapping up front.
This refactoring allows the upcoming fix to extend the spinlock coverage
around the enqueue operation without performing DMA mapping under the
spinlock.
No functional change is intended in this patch.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI host controller driver does not implement Hot-Join
handling, yet Hot-Join response control defaults to allowing devices to
Hot-Join the bus. Configure HC_CONTROL_HOT_JOIN_CTRL to NACK all Hot-Join
attempts.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI driver currently returns -ETIME for various timeout
conditions, while other I3C master drivers consistently use -ETIMEDOUT
for the same class of errors. Align the HCI driver with the rest of the
subsystem by replacing all uses of -ETIME with -ETIMEDOUT.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
All combined i2c/i3c drivers appear to suffer from the same link
time problem when CONFIG_I3C is set to 'm':
arm-linux-gnueabi-ld: drivers/iio/magnetometer/mmc5633.o: in function `mmc5633_i3c_driver_init':
mmc5633.c:(.init.text+0x30): undefined reference to `i3c_driver_register_with_owner'
This was previously fixed every time by marking individual
drivers as 'depends on I2C; depends on I3C || !I3C', but this gets
tedious and is somewhat confusing.
Add a Kconfig symbol 'I3C_OR_I2C' to help replace those dependencies,
and use this in all the existing drivers that had already fixed it
as well as the new mmc5633 driver.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260204164216.544409-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The IBI_SIR_REQ_REJECT register is a 32-bit bitmap indexed by the
dynamic address of each I3C slave. The DesignWare controller derives
the bit index by folding the 7-bit dynamic address into a 5-bit value,
using the sum of the lower 5 bits and the upper 2 bits, modulo 32.
The current implementation incorrectly uses the device table index
when updating the SIR reject mask, which can result in rejecting or
accepting IBIs for the wrong device.
Compute the SIR reject bit index directly from the dynamic address,
as defined by the controller specification, and use it consistently
when updating the reject mask.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d4ad8161e604156c60327060ad3d339ebf18fe4f.1769479330.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Convert dw-i3c-master to use scoped spinlock guards in place of
open-coded spin_lock_irqsave()/spin_unlock_irqrestore() pairs to ensure
locks are always safely released on scope exit.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/79020c006c15dda9d057946530f16cfb4650d450.1769479330.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The dw_i3c_master_i2c_xfers() function allocates memory for the xfer
structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get()
fails, the function returns without freeing the allocated xfer, resulting
in a memory leak.
Add a dw_i3c_master_free_xfer() call to the error path to ensure the
allocated memory is properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 62fe9d06f570 ("i3c: dw: Add power management support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260126081121.644099-1-zilin@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Assign the driver PM operations pointer, which is necessary for the PCI
subsystem to put the device into a low power state. Refer to
pci_pm_suspend_noirq() which bails out if the pointer is NULL, before
it has the opportunity to call pci_prepare_to_sleep().
No other actions are necessary as the mipi-i3c-hci driver takes care of
controller state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add system suspend callbacks. Implement them by forcing runtime PM.
Consequently bail out if Runtime PM is not allowed.
On resume from System Suspend (suspend to RAM), rerun Dynamic Address
Assignment to restore addresses for devices that may have lost power.
On resume from System Hibernation (suspend to disk), use the new
i3c_master_do_daa_ext() helper with 'rstdaa' set to true, which
additionally handles the case where devices are assigned different dynamic
addresses after a hibernation boot.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
After system hibernation, I3C Dynamic Addresses may be reassigned at boot
and no longer match the values recorded before suspend. Introduce
i3c_master_do_daa_ext() to handle this situation.
The restore procedure is straightforward: issue a Reset Dynamic Address
Assignment (RSTDAA), then run the standard DAA sequence. The existing DAA
logic already supports detecting and updating devices whose dynamic
addresses differ from previously known values.
Refactor the DAA path by introducing a shared helper used by both the
normal i3c_master_do_daa() path and the new extended restore function,
and correct the kernel-doc in the process.
Export i3c_master_do_daa_ext() so that master drivers can invoke it from
their PM restore callbacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The devs_lock spinlock introduced when adding support for ibi:s was
never initialized.
Fixes: e389b1d72a624 ("i3c: dw: Add support for in-band interrupts")
Suggested-by: Jani Nurminen <jani.nurminen@windriver.com>
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@est.tech>
Reviewed-by: Ivar Holmqvist <ivar.holmqvist@est.tech>
Link: https://patch.msgid.link/20260116-i3c_dw_initialize_spinlock-v3-1-cf707b6ed75f@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Enable Runtime PM for the mipi_i3c_hci_pci driver. Introduce helpers to
allow and forbid Runtime PM during probe and remove, using pm_runtime APIs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-22-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Implement optional Runtime PM support for the MIPI I3C HCI driver.
Introduce runtime suspend and resume callbacks to manage bus state and
restore hardware configuration after resume. Optionally enable autosuspend
with a default delay of 1 second, and add helper functions to control
Runtime PM during probe and remove.
Read quirks from i3c_hci_driver_ids[] and set new quirk
HCI_QUIRK_RPM_ALLOWED for intel-lpss-i3c devices to enable runtime PM for
them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-21-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Master drivers currently manage Runtime PM individually, but all require
runtime resume for bus operations. This can be centralized in common code.
Add optional Runtime PM support to ensure the parent device is runtime
resumed before bus operations and auto-suspended afterward.
Notably, do not call ->bus_cleanup() if runtime resume fails. Master
drivers that opt-in to core runtime PM support must take that into account.
Also provide an option to allow IBIs and hot-joins while runtime suspended.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-20-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for future reuse. Move master dynamic address setting logic from
i3c_hci_bus_init() into a dedicated helper function,
i3c_hci_set_master_dyn_addr().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-19-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare i3c_hci_reset_and_init() to support runtime resume. Update it to
handle the case where the I/O mode has already been selected.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-18-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for future reuse. Move core initialization logic from
i3c_hci_init() into a dedicated helper function,
i3c_hci_reset_and_init().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-17-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for future reuse. Move the IO mode setting logic from
i3c_hci_init() into a dedicated helper function, i3c_hci_set_io_mode().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-16-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for future reuse of the reset sequence in other contexts, such as
power management. Move the software reset logic from i3c_hci_init() into a
dedicated helper function, i3c_hci_software_reset().
Software reset should never fail. Print an error message if it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Introduce helper functions to suspend and resume PIO operations. These
are required to prepare for upcoming Runtime PM support, ensuring that
PIO state is properly managed during power transitions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Move the PIO register setup logic out of hci_pio_init() into a new
helper, __hci_pio_init(). This refactoring prepares for Runtime PM
support by allowing PIO registers to be reinitialized independently
after resume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Introduce helper functions to suspend and resume DMA operations. These
are required to prepare for upcoming Runtime PM support, ensuring that
DMA state is properly managed during power transitions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Split the ring setup logic out of hci_dma_init() into a new helper
hci_dma_init_rings(). This refactoring prepares for Runtime PM support
by allowing DMA rings to be reinitialized independently after resume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add a dedicated function to restore the Device Address Table (DAT) in
preparation for Runtime PM support. This will allow reprogramming the DAT
after the controller resumes from a low-power state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Prepare for Runtime PM support, which requires restoring the Device Address
Table (DAT) registers after resume. Maintain a copy of DAT in memory so it
can be reprogrammed when the controller is powered back up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver already uses devres for resource management, but the standard
resource-managed DMA allocation helpers cannot be used because they assume
the DMA device matches the managed device.
To address this, factor out the deallocation logic from hci_dma_cleanup()
into a new helper, hci_dma_free(), and register it as a devres action.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver already uses managed resources, so convert the PIO data
structure allocation to devm_zalloc(). Remove the manual kfree().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The driver already uses managed resources, so convert the Device Address
Table (DAT) bitmap allocation to use devm_bitmap_zalloc(). Remove the
manual cleanup routine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
IBI disable failures are not indicative of a software bug, so using
WARN_ON() is not appropriate. Replace these warnings with dev_err().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
To prevent inconsistent state when an error occurs, ensure the hot-join
flag is updated only when enabling or disabling hot-join succeeds.
Fixes: 317bacf960a48 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Wait for the bus to fully disable before proceeding, ensuring that no
operations are still in progress. Synchronize the IRQ handler only after
interrupt signals have been disabled. This approach also handles cases
where bus disable might fail, preventing race conditions and ensuring a
consistent shutdown sequence.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The MIPI I3C HCI specification does not define reset values for
RING_OPERATION1 fields, and some controllers (e.g., Intel) do not clear
them during a software reset. Ensure the ring pointers are explicitly
set to zero during bus initialization to avoid inconsistent state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Move device name initialization to occur after i3c_bus_init()
so that i3cbus->id is guaranteed to be assigned before it is used.
Fixes: 9d4f219807d5 ("i3c: fix refcount inconsistency in i3c_master_register")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260112-upstream_i3c_fix-v1-1-cbbf2cb71809@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
