| Age | Commit message (Collapse) | Author |
|---|
|
clangd reports many "unused header" warnings throughout the Xe driver.
Start working to clean this up by removing unnecessary includes in our
.c files and/or replacing them with explicit includes of other headers
that were previously being included indirectly.
By far the most common offender here was unnecessary inclusion of
xe_gt.h. That likely originates from the early days of xe.ko when
xe_mmio did not exist and all register accesses, including those
unrelated to GTs, were done with GT functions.
There's still a lot of additional #include cleanup that can be done in
the headers themselves; that will come as a followup series.
v2:
- Squash the 79-patch series down to a single patch. (MattB)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260115032803.4067824-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Define a struct xe_pagemap that embeds all pagemap-related
data used by xekmd, and use the drm_pagemap cache- and
shrinker to manage lifetime.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-9-thomas.hellstrom@linux.intel.com
|
|
Page reclamation feature needs the PRL to be suballocated into a
GGTT-mapped BO. On allocation failure, fallback to default tlb
invalidation with full PPC flush.
PRL's BO allocation is managed in separate pool to ensure 4K alignment
for proper GGTT address.
With BO, pass into TLB invalidation backend and modify fence to
accomadate accordingly.
v2:
- Removed page reclaim related variables from TLB fence. (Matthew B)
- Allocate PRL bo size to num_entries. (Matthew B)
- Move PRL bo allocation to tlb_inval run_job. (Matthew B)
v5:
- Use xe_page_reclaim_list_valid. (Matthew B)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-18-brian3.nguyen@intel.com
|
|
During the early days of the Xe driver, there were cases where we
accessed some fields in the primary GT's xe_gt structure before the GT
itself was formally initialized; this required that the structure itself
be allocated during xe_tile_init_early(). A lot of refactoring of the
device probe has happened since that time and there's no longer a need
to allocate the primary GT early. Move the allocation into
xe_info_init() where GT initialization happens and where we're doing the
allocation of the media GT.
v2:
- Only make this change after a separate patch to perform VF GMD_ID
lookup with a dummy GT instead of xe_root_mmio_gt().
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-33-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Sort the include lines alphabetically, no impact on code behavior.
Signed-off-by: Arun Abhishek Chowhan <arun.abhishek.chowhan@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://lore.kernel.org/r/20251013095914.3742505-1-arun.abhishek.chowhan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
So far, kernel and userspace allocations have shared the same VRAM region.
However, in some scenarios, it may be necessary to reserve a separate
VRAM area exclusively for kernel allocations.
Let's add preliminary support for such a configuration.
v2:
- replaced for_each_bo_flag_vram with the improved
for_each_set_bo_vram_flag helper (Matthew)
- moved the VRAM flag iteration macro definition into xe_bo.c (Matthew)
- drop unused bo_flgas from bo_vram_flags_to_vram_placement (Matthew)
- use hweight32 helper in __xe_bo_fixed_placement for readability
(Matthew)
v3: remove unnecessary VRAM fixup id
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251003162619.1984236-2-piotr.piorkowski@intel.com
|
|
The xe_vram_region_alloc() function returns NULL on error. It never
returns error pointers. Update the error checking to match.
Fixes: 4b0a5f5ce784 ("drm/xe: Unify the initialization of VRAM regions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/5449065e-9758-4711-b706-78771c0753c4@sabinyo.mountain
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently in the drivers we have defined VRAM regions per device and per
tile. Initialization of these regions is done in two completely different
ways. To simplify the logic of the code and make it easier to add new
regions in the future, let's unify the way we initialize VRAM regions.
v2:
- fix doc comments in struct xe_vram_region
- remove unnecessary includes (Jani)
v3:
- move code from xe_vram_init_regions_managers to xe_tile_init_noalloc
(Matthew)
- replace ioremap_wc to devm_ioremap_wc for mapping VRAM BAR
(Matthew)
- Replace the tile id parameter with vram region in the xe_pf_begin
function.
v4:
- remove tile back pointer from struct xe_vram_region
- add new back pointers: xe and migarte to xe_vram_region
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> # rev3
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-6-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Currently, xe_migrate_init handled both allocation and initialization,
Lets moves allocation to xe_tile_alloc via a new xe_migrate_alloc
function, and keep initialization in xe_migrate_init.
This will allow the migration pointers to be passed to other structures
before full initialization.
Also replaces devm_kzalloc with drmm_kzalloc for better
DRM-managed memory.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-5-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Let's move the xe_vram_region structure to a new header dedicated to VRAM
to improve modularity and avoid unnecessary dependencies when only
VRAM-related structures are needed.
v2: Fix build if CONFIG_DRM_XE_DEVMEM_MIRROR is enabled
v3: Fix build if CONFIG_DRM_XE_DISPLAY is enabled
v4: Move helper to get tile dpagemap to xe_svm.c
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> # rev3
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-4-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
In future platforms, we will need to represent the device and tile
VRAM regions in a more dynamic way, so let's abandon the static
allocation of these structures and start use a dynamic allocation.
v2:
- Add a helpers for accessing fields of the xe_vram_region structure
v3:
- Add missing EXPORT_SYMBOL_IF_KUNIT for
xe_vram_region_actual_physical_size
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-3-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
memirqs require allocations into GGTT, which we cannot use until
after display is enabled.
Now that the initialisation of interrupts is postponed, move memirq
init too.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://lore.kernel.org/r/20250619104858.418440-14-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Instead of allocating inside xe_tile, create a new function that returns
an allocated struct xe_ggtt from xe_ggtt.c
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250505121924.921544-4-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Add SVM device memory mirroring which enables device pages for
migration. Enabled via CONFIG_XE_DEVMEM_MIRROR Kconfig. Kconfig option
defaults to enabled. If not enabled, SVM will work sans migration and
KMD memory footprint will be less.
v3:
- Add CONFIG_XE_DEVMEM_MIRROR
v4:
- Fix Kconfig (Himal)
- Use %pe to print errors (Thomas)
- Fix alignment issue (Checkpatch)
v5:
- s/xe_mem_region/xe_vram_region (Rebase)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
- s/drm_info/drm_dbg/
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-22-matthew.brost@intel.com
|
|
Propagate the error to the caller so initialization properly stops if
sysfs creation fails.
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
VRAM manager is related directly to struct xe_vram_region so it
should be inside this structure.
Let's move the VRAM to struct xe_vram_region.
v2:
- remove xe_vram_region pointer from xe_ttm_vram_mgr
- stop use dynamic alloaction for xe_ttm_vram_mgr in xe_vram_region
- rename struct xe_ttm_vram_mgr vram_mgr to ttm
v3:
- fix "'ttm' not described in 'xe_vram_region'"
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210081511.906452-3-piotr.piorkowski@intel.com
|
|
No allocations should be done before we have had a chance to preserve
the display fb.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-4-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The kernel fault injection infrastructure is used to test proper error
handling during probe. The return code of the functions using
ALLOW_ERROR_INJECTION() can be conditionnally modified at runtime by
tuning some debugfs entries. This requires CONFIG_FUNCTION_ERROR_INJECTION
(among others).
One way to use fault injection at probe time by making each of those
functions fail one at a time is:
FAILTYPE=fail_function
DEVICE="0000:00:08.0" # depends on the system
ERRNO=-12 # -ENOMEM, can depend on the function
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 100 > /sys/kernel/debug/$FAILTYPE/probability
echo 0 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
modprobe xe
echo $DEVICE > /sys/bus/pci/drivers/xe/unbind
grep -oP "^.* \[xe\]" /sys/kernel/debug/$FAILTYPE/injectable | \
cut -d ' ' -f 1 | while read -r FUNCTION ; do
echo "Injecting fault in $FUNCTION"
echo "" > /sys/kernel/debug/$FAILTYPE/inject
echo $FUNCTION > /sys/kernel/debug/$FAILTYPE/inject
printf %#x $ERRNO > /sys/kernel/debug/$FAILTYPE/$FUNCTION/retval
echo $DEVICE > /sys/bus/pci/drivers/xe/bind
done
rmmod xe
It will also be integrated into IGT for systematic execution by CI.
v2: Wrappers are not needed in the cases covered by this patch, so
remove them and use ALLOW_ERROR_INJECTION() directly.
v3: Document the use of fault injection at probe time in xe_pci_probe
and refer to it where ALLOW_ERROR_INJECTION() is used.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927151207.399354-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface. Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
|
|
Ensure that the status of all tile associated sysfs entries creation is
relayed to xe_tile_init_noalloc, leading to a driver load abort if any
sysfs creation failures occur.
-v2
Avoid unnecessary warn/error messages. (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-7-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_pm_init is the very last thing during the xe_pci_probe(),
hence these protections are useless from the point of view
of ensuring that the device is awake.
Let's remove it so we continue towards the goal of killing
xe_device_mem_access.
v2: Adding more cases
v3: Provide a separate fix for xe_tile_init_noalloc return (Matt)
Adding a new case where display HDCP init calls which
are also called at display probe time.
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There's no reason to proceed with applying workaround and initing
sysfs if we are going to abort the probe upon failure.
Fixes: e5a845fd8fa4 ("drm/xe: Add sysfs entry for tile")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306203110.146387-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
GuC will need to be loaded earlier during probe. Having functional GGTT
is one of the prerequisites.
Also rename xe_ggtt_init_noalloc to xe_ggtt_init_early to match the new
call site.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It also merges the GT (which is part of tile) initialization happening
at xe_info_init with allocating other per-tile data structures into a
common helper function.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Although the vast majority of workarounds the driver needs to implement
are either GT-based or display-based, there are occasionally workarounds
that reside outside those parts of the hardware (i.e., in they target
registers in the sgunit/soc); we can consider these to be "tile"
workarounds since there will be instance of these registers per tile.
The registers in question should only lose their values during a
function-level reset, so they only need to be applied during probe and
resume; the registers will not be affected by GT/engine resets.
Tile workarounds are rare (there's only one, 22010954014, that's
relevant to Xe at the moment) so it's probably not worth updating the
xe_rtp design to handle tile-level workarounds yet, although we may want
to consider that in the future if/when more of these show up on future
platforms.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20230913231411.291933-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Current size member of vram struct does not give
complete information as what "size" contains. Does
it contain reserved portions or not. Name it usable
size and accordingly describe other size members as
well.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We have recently introduced tile for each gpu,
so lets add sysfs entry per tile for userspace
to provide required information specific to tile.
V5:
- define ktype as const
V4:
- Reorder headers - Aravind
V3:
- Make API to return void and add drm_warn - Aravind
V2:
- Add logs in failure path
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
v2:
- Fix doubled word. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-32-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Migration primarily focuses on the memory associated with a tile, so it
makes more sense to track this at the tile level (especially since the
driver was already skipping migration operations on media GTs).
Note that the blitter engine used to perform the migration always lives
in the tile's primary GT today. In theory that could change if media
GTs ever start including blitter engines in the future, but we can
extend the design if/when that happens in the future.
v2:
- Fix kunit test build
- Kerneldoc parameter name update
v3:
- Removed leftover prototype for removed function. (Gustavo)
- Remove unrelated / unwanted error handling change. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-15-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since memory and address spaces are a tile concept rather than a GT
concept, we need to plumb tile-based handling through lots of
memory-related code.
Note that one remaining shortcoming here that will need to be addressed
before media GT support can be re-enabled is that although the address
space is shared between a tile's GTs, each GT caches the PTEs
independently in their own TLB and thus TLB invalidation should be
handled at the GT level.
v2:
- Fix kunit test build.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-13-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On platforms with VRAM, the VRAM is associated with the tile, not the
GT.
v2:
- Unsquash the GGTT handling back into its own patch.
- Fix kunit test build
v3:
- Tweak the "FIXME" comment to clarify that this function will be
completely gone by the end of the series. (Lucas)
v4:
- Move a few changes that were supposed to be part of the GGTT patch
back to that commit. (Gustavo)
v5:
- Kerneldoc parameter name fix.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-11-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GGTT exists at the tile level. When a tile contains multiple GTs,
they share the same GGTT.
v2:
- Include some changes that were mis-squashed into the VRAM patch.
(Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20230601215244.678611-9-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
