| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused KEEP_ACTIVE flag in the new multi queue uAPI (Niranjana)
- Expose new temperature attributes in HWMON (Karthik)
Driver Changes:
- Force i2c into polling mode when in survivability (Raag)
- Validate preferred system memory placement in xe_svm_range_validate (Brost)
- Adjust page count tracepoints in shrinker (Brost)
- Fix a couple drm_pagemap issues with multi-GPU (Brost)
- Define GuC firmware for NVL-S (Roper)
- Handle GT resume failure (Raag)
- Improve wedged mode handling (Lukasz)
- Add missing newlines to drm_warn messages (Osama)
- Fix WQ_MEM_RECLAIM passed as max_active to alloc_workqueue (Marco)
- Page-reclaim fixes and PRL stats addition (Brian)
- Fix struct guc_lfd_file_header kernel-doc (Jani)
- Allow compressible surfaces to be 1-way coherent (Xin)
- Fix DRM scheduler layering violations in Xe (Brost)
- Minor improvements to MERT code (Michal)
- Privatize struct xe_ggtt_node (Maarten)
- Convert wait for lmem init into an assert (Bala)
- Enable GSC loading and PXP for PTL (Daniele)
- Replace use of system_wq with tlb_inval->timeout_wq (Marco)
- VRAM addr range bit expansion (Fei)
- Cleanup unused header includes (Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkSxRQK7VhTlP32@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Beyond Display:
- Make 'guc_hw_reg_state' static as it isn't exported (Ben)
- Fix doc build on mei related interface header (Jani)
Display related:
- Fix ggtt fb alignment on Xe display (Tvrtko)
- More display clean-up towards deduplication and full separation (Jani)
- Use the consolidated HDMI tables (Suraj)
- Account for DSC slice overhead (Ankit)
- Prepare GVT for display modularization (Ankit, Jani)
- Enable/Disable DC balance along with VRR DSB (Mitul, Ville)
- Protection against unsupported modes in LT PHY (Suraj)
- Display W/a addition and fixes (Gustavo)
- Fix many SPDX identifier comments (Ankit)
- Incorporate Xe3_LPD changes for CD2X divider (Gustavo)
- Clean up link BW/DSC slice config computation (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkNThVRSkGAfUVv@intel.com
|
|
Improve header check: Remove unused -DHDRTEST. Include the header twice
to check for include guards. Run kernel-doc on the header.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260107155401.2379127-5-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Core Changes:
- Dynamic pagemaps and multi-device SVM (Thomas)
Driver Changes:
- Introduce SRIOV scheduler Groups (Daniele)
- Configure migration queue as low latency (Francois)
- Don't use absolute path in generated header comment (Calvin Owens)
- Add SoC remapper support for system controller (Umesh)
- Insert compiler barriers in GuC code (Jonathan)
- Rebar updates (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aVOiULyYdnFbq-JB@fedora
|
|
The xe display build no longer needs the compat i915_drv.h or the ugly
-Ddrm_i915_private=xe_device hack. Remove them, with great pleasure.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/8d2da5404439ed334d7682922b599f36eeb60e9d.1767009044.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
[airlied: fix guc submit double definition]
UAPI Changes:
- Multi-Queue support (Niranjana)
- Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE (Brost)
- Add NO_COMPRESSION BO flag and query capability (Sanjay)
- Add gt_id to struct drm_xe_oa_unit (Ashutosh)
- Expose MERT OA unit (Ashutosh)
- Sysfs Survivability refactor (Riana)
Cross-subsystem Changes:
- VFIO: Add device specific vfio_pci driver variant for Intel graphics (Winiarski)
Driver Changes:
- MAINTAINERS update (Lucas -> Matt)
- Add helper to query compression enable status (Xin)
- Xe_VM fixes and updates (Shuicheng, Himal)
- Documentation fixes (Winiarski, Swaraj, Niranjana)
- Kunit fix (Roper)
- Fix potential leaks, uaf, null derref, and oversized
allocations (Shuicheng, Sanjay, Mika, Tapani)
- Other minor fixes like kbuild duplication and sysfs_emit (Shuicheng, Madhur)
- Handle msix vector0 interrupt (Venkata)
- Scope-based forcewake and runtime PM (Roper, Raag)
- GuC/HuC related fixes and refactors (Lucas, Zhanjun, Brost, Julia, Wajdeczko)
- Fix conversion from clock ticks to milliseconds (Harish)
- SRIOV PF PF: Add support for MERT (Lukasz)
- Enable SR-IOV VF migration and other SRIOV updates (Winiarski,
Satya, Brost, Wajdeczko, Piotr, Tomasz, Daniele)
- Optimize runtime suspend/resume and other PM improvements (Raag)
- Some W/a additions and updates (Bala, Harish, Roper)
- Use for_each_tlb_inval() to calculate invalidation fences (Roper)
- Fix VFIO link error (Arnd)
- Fix ix drm_gpusvm_init() arguments (Arnd)
- Other OA refactor (Ashutosh)
- Refactor PAT and expose debugfs (Xin)
- Enable Indirect Ring State for xe3p_xpc (Niranjana)
- MEI interrupt fix (Junxiao)
- Add stats for mode switching on hw_engine_group (Francois)
- DMA-Buf related changes (Thomas)
- Multi Queue feature support (Niranjana)
- Enable I2C controller for Crescent Island (Raag)
- Enable NVM for Crescent Island (Sasha)
- Increase TDF timeout (Jagmeet)
- Restore engine registers before restarting schedulers after GT reset (Jan)
- Page Reclamation Support for Xe3p Platforms (Brian, Brost, Oak)
- Fix performance when pagefaults and 3d/display share resources (Brost)
- More OA MERT work (Ashutosh)
- Fix return values (Dan)
- Some log level and messages improvements (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aUXUhEgzs6hDLQuu@intel.com
|
|
Now that xe_pci.c calls the rebar directly, it doesn't make sense to
keep it in xe_vram.c since it's closer to the PCI initialization than to
the VRAM. Move it to its own file.
While at it, add a better comment to document the possible values for
the vram_bar_size module parameter.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251219211650.1908961-5-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
SoC remapper is used to map different HW functions in the SoC to their
respective drivers. Initialize SoC remapper during driver load.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patch.msgid.link/20251223183943.3175941-6-umesh.nerlige.ramappa@intel.com
|
|
Add the initial plane handling functions to the display parent
interface. Add the call wrappers in dedicated intel_initial_plane.c
instead of intel_parent.c, as we'll be refactoring the calls heavily.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/ab91c891677fe2bb83bf5aafa5ee984b2442b84d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Follow i915 with the more naturally flowing naming.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/62eb56fe348a8fe7c17333d784192da701367cc7.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Page reclaim list (PRL) is preparation work for the page reclaim feature.
The PRL is firstly owned by pt_update_ops and all other page reclaim
operations will point back to this PRL. PRL generates its entries during
the unbind page walker, updating the PRL.
This PRL is restricted to a 4K page, so 512 page entries at most.
v2:
- Removed unused function. (Shuicheng)
- Compacted warning checking, update commit message,
spelling, etc. (Shuicheng, Matthew B)
- Fix kernel docs
- Moved PRL max entries overflow handling out from
generate_reclaim_entry to caller (Shuicheng)
- Add xe_page_reclaim_list_init for clarity. (Matthew B)
- Modify xe_guc_page_reclaim_entry to use macros
for greater flexbility. (Matthew B)
- Add fallback for PTE outside of page reclaim supported
4K, 64K, 2M pages (Matthew B)
- Invalidate PRL for early abort page walk.
- Removed page reclaim related variables from tlb fence
(Matthew Brost)
- Remove error handling in *alloc_entries failure. (Matthew B)
v3:
- Fix NULL pointer dereference check.
- Modify reclaim_entry to QW and bitfields accordingly. (Matthew B)
- Add vm_dbg prints for PRL generation and invalidation. (Matthew B)
v4:
- s/GENMASK/GENMASK_ULL && s/BIT/BIT_ULL (CI)
v5:
- Addition of xe_page_reclaim_list_is_new() to avoid continuous
allocation of PRL if consecutive VMAs cause a PRL invalidation.
- Add xe_page_reclaim_list_valid() helpers for clarity. (Matthew B)
- Move xe_page_reclaim_list_entries_put in
xe_page_reclaim_list_invalidate.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-17-brian3.nguyen@intel.com
|
|
Backmerge to get the topic/drm-intel-plane-color-pipeline branch
contents.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 topic pull request for v6.19:
Features and functionality:
- Add plane color management support (Uma, Chaitanya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/e7129c6afd6208719d2f5124da86e810505e7a7b@intel.com
|
|
Add a color pipeline with three colorops in the sequence
1D LUT - 3x4 CTM - 1D LUT
This pipeline can be used to do any color space conversion or HDR
tone mapping
v2: Change namespace to drm_plane_colorop*
v3: Use simpler/pre-existing colorops for first iteration
v4:
- s/*_tf_*/*_color_* (Jani)
- Refactor to separate files (Jani)
- Add missing space in comment (Suraj)
- Consolidate patch that adds/attaches pipeline property
v5:
- Limit MAX_COLOR_PIPELINES to 2.(Suraj)
Increase it as and when we add more pipelines.
- Remove redundant initialization code (Suraj)
v6:
- Use drm_plane_create_color_pipeline_property() (Arun)
Now MAX_COLOR_PIPELINES is 1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-5-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add data structure to store intel specific details of colorop
v2:
- Remove dead code
- Convert macro to function (Jani)
- Remove colorop state as it is not being used
- Refactor to separate file
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-3-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: bd45d46ffc8f ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
(cherry picked from commit ef7de33544a7a6783d7afe09496da362d1e90ba1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
|
|
Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 17f22465c5a5573724c942ca7147b4024631ef87)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Add support for triggering and handling MERT TLB invalidation. After
LMTT updates, the MERT TLB invalidation is initiated to ensure memory
translations remain coherent.
Completion of the invalidation is signaled via MERT interrupt (bit 13 in
the GFX master interrupt register). Detect and handle this interrupt to
properly synchronize the invalidation flow.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-4-lukasz.laguna@intel.com
|
|
The sole user of the remaining functions in intel_gmch.[ch] is in
intel_vga.c. Move everything there.
Since intel_gmch.c hasn't been part of xe, use a dummy function
relocated from xe_display_misc.c, with #ifdef. This is purely to keep
this change non-functional.
This allows us to remove soc/intel_gmch.[ch] from i915, compat
soc/intel_gmch.h from xe, and xe_display_misc.c from xe.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/b0f853ad7eae686738defa9e8f08a8848df8f226.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The sole user of intel_rom.[ch] has always been in display. Move them
under display.
This allows us to remove the compat soc/intel_rom.h from xe, as well as
the Makefile rules to build anything from soc/.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/352ec255a6e9b81c7d1e35d8fbf7018d4049d4d3.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The remaining users of intel_dram.[ch] are all in display. Move them
under display.
This allows us to remove the compat soc/intel_dram.h from xe.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/4c0fbdab989a70d287536a7eafb002dc836ced12.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Reduce the conditional compilation in i915 by building
intel_display_rps.c as part of the xe module. This doesn't actually
enable RPS on xe, because there's no parent interface implementation on
xe side, but it's a step in the right direction.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/93df0bb727fce14aa9a542dbd2c0826a0fa0a16f.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aRcJOrisG2qPbucE@fedora
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump imprement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQuBECxNOhudc0Bz@fedora
|
|
Now that it's possible to free the packets - connect the restore
handling logic with the ring.
The helpers will also be used in upcoming changes that will start
producing migration data packets.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-7-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Upcoming changes will allow users to control VF state and obtain its
migration data with a device-level granularity (not tile/gt).
Change the data structures to reflect that and move the GT-level
migration init to happen after device-level init.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-3-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
|
|
Add xe_guc_pagefault layer (producer) which parses G2H fault messages
messages into struct xe_pagefault, forwards them to the page fault layer
(consumer) for servicing, and provides a vfunc to acknowledge faults to
the GuC upon completion. Replace the old (and incorrect) GT page fault
layer with this new layer throughout the driver.
As part of this change, the ACC handling code has been removed, as it is
dead code that is currently unused.
v2:
- Include engine instance (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-7-matthew.brost@intel.com
|
|
Stub out the new page fault layer and add kernel documentation. This is
intended as a replacement for the GT page fault layer, enabling multiple
producers to hook into a shared page fault consumer interface.
v2:
- Fix kernel doc typo (checkpatch)
- Remove comment around GT (Stuart)
- Add explaination around reclaim (Francois)
- Add comment around u8 vs enum (Francois)
- Include engine instance (Stuart)
v3:
- Fix XE_PAGEFAULT_TYPE_ATOMIC_ACCESS_VIOLATION kernel doc (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-2-matthew.brost@intel.com
|
|
Start using display parent interface for xe runtime pm.
v2: keep xe_display_rpm.c
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-7-jouni.hogander@intel.com
|
|
Define function to bring phy lane out of reset for LT Phy and the
corresponding pre-requisite steps before we follow the steps for
Phy lane reset. Also create a skeleton of LT PHY PLL enable sequence
function in which we can place this function
Bspec: 77449, 74749, 74499, 74495, 68960
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-4-suraj.kandpal@intel.com
|
|
We already have some SR-IOV specific knobs exposed as debugfs
files to allow low level tuning of the SR-IOV configurations,
but those files are mainly for the use by the developers and
debugfs might not be available on the production builds.
Start building dedicated sysfs sub-tree under xe device, where
in upcoming patches we will add selected attributes that will
help provision and manage PF and all VFs:
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── pf/
├── vf1/
├── vf2/
:
└── vfN/
Add all required data types and helper macros that will be used
by upcoming patches to define actual attributes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251030222348.186658-2-michal.wajdeczko@intel.com
|
|
Reduce the compat i915_utils.h to only cover the requirements of
MISSING_CASE() in soc/ and the few i915_inject_probe_failure()
instances, instead of including the entire i915_utils.h from i915. This
prevents new users for the utilities from cropping up.
With this, we can remove the xe/display/ext/i915_utils.c altogether.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/c02f82e45f31caf95bd1339080b9099c3b7190be.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_display_utils.c for display utilities that need more than a
header.
Start off with intel_display_run_as_guest(). The implementation is
intentional duplication of the i915_utils.h i915_run_as_guest(), with
the idea that it's small enough to not matter.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/469f9c41e0c3e3099314a3cf1a7671bf36ec8ffd.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add register definitions for sharpness strength and
filter window size used by CASF. Provide functions to
read and write these fields.
The sharpness strength value is determined by user input,
while the winsize is based on the resolution. The casf_enable
flag should be set if the platform supports sharpness adjustments
and the user API strength is not zero. Once sharpness is
enabled, update the strength bit of the register whenever
the user changes the strength value, as the enable bit and
winsize bit remain constant.
Introduce helper to enable, disable and update strength.
Add relavant strength and winsize in both enable and disable.
v2: Introduce get_config for casf[Ankit]
v3: Replace 0 with FILTER_STRENGTH_MASK[Ankit]
v4: After updating strength add win_sz register
v5: Replace u16 with u32 for total_pixel
v6: Add casf logging
v7: Add helper for enable and disable casf
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251028120747.3027332-4-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
As we plan to add more VFs provisioning methods, start moving
related code into single place.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20251015091211.592-2-michal.wajdeczko@intel.com
|
|
Currently intel_bw.c contains basically three completely independent
parts:
- SAGV/memory bandwidth handling
- DBuf bandwidth handling
- "Maximum pipe read bandwidth" calculation, which is some kind
of internal per-pipe bandwidth limit.
Carve out the DBuf bandwdith handling into a separate file since
there is no actual dependency between it and the rest of intel_bw.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251013201236.30084-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Add a new helper thingy to deal with the pipe prefill latency.
We get three potentially useful thigns out of this:
- skl_prefill_vblank_too_short() used for checking the
actual vblank/guardband length
- skl_prefill_min_guardband() to calculate a suitable guardband
size based on some worst case scaling/etc. estimates
- skl_prefill_min_cdclk() used to calculate a minimum cdclk
frequency required for very small vblank lengths (in case the
otherwise computed minimum cdclk doesn't result in fast enough
prefill).
The internal arithmetic is done terms of scanlines using .16
binary fixed point representation.
v2: Add the missing <<16 for framestart_delay
Drop the cdclk_state stuff in favor of crtc_state->min_cdclk
Rename to skl_prefill since this is skl+ only
Use intel_crtc_vblank_length() instead of hand rolling it
memset(0) in prefill_init()
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251014191808.12326-9-ville.syrjala@linux.intel.com
|
|
We already have control functions that we use to control the VF
state on the per-GT basis, but that is low level detail from the
user point of view, who rather expects VF-level functions.
For now add simple functions that just iterate over all GTs and
call per-GT control function. We will soon allow to use some of
them from the user facing interfaces like debugfs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250930233525.201263-2-michal.wajdeczko@intel.com
|
|
Populate new per SR-IOV function debugfs directories with next
level directories that represent tiles. There are no files yet,
but we will continue updating that tree in upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250928140029.198847-4-michal.wajdeczko@intel.com
|
|
In upcoming patches, we will build on the PF separate debugfs
tree for all SR-IOV related files and this new code will need
dedicated file. To minimize large diffs later, move existing
function now as-is, so any future modifications will be done
directly in target file.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250928140029.198847-2-michal.wajdeczko@intel.com
|
|
Add display/xe_stolen.c as the implementation for the stolen interface
exposed to display. This allows hiding the implementation details that
shouldn't be exposed to display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/8e807c6aafc6151b18df08dda20053516813e001.1758732183.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
|
|
Introduce xe_late_bind_fw to enable firmware loading for the devices,
such as the fan controller, during the driver probe. Typically,
firmware for such devices are part of IFWI flash image but can be
replaced at probe after OEM tuning.
This patch binds mei late binding component to enable firmware loading.
v2:
- Add devm_add_action_or_reset to remove the component (Daniele)
- Add INTEL_MEI_GSC check in xe_late_bind_init() (Daniele)
v3:
- Fail driver probe if late bind initialization fails,
add has_late_bind flag (Daniele)
v4:
- %s/I915_COMPONENT_LATE_BIND/INTEL_COMPONENT_LATE_BIND/
v6:
- rebased
v7:
- rebased
- In xe_late_bind_init, use drm_err when returning an error to
stop the probe (Lucas)
- Use imperative mode in commit message (Lucas)
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-4-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Catching up with some display dependencies.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
