summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
11 daysdrm/amd/display: Fix DCE LVDS handlingAlex Deucher
LVDS does not use an HPD pin so it may be invalid. Handle this case correctly in link encoder creation. Fixes: 7c8fb3b8e9ba ("drm/amd/display: Add hpd_source index check for DCE60/80/100/110/112/120 link encoders") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012 Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Cc: Roman Li <roman.li@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3b5620f7ee688177fcf65cf61588c5435bce1872) Cc: stable@vger.kernel.org
11 daysdrm/amd/display: check if ext_caps is valid in BL setupAlex Deucher
LVDS connectors don't have extended backlight caps so check if the pointer is valid before accessing it. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012 Fixes: 1454642960b0 ("drm/amd: Re-introduce property to control adaptive backlight modulation") Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6) Cc: stable@vger.kernel.org
12 daysdrm/amd/display: Fix drm_edid leak in amdgpu_dmAlex Hung
[WHAT] When a sink is connected, aconnector->drm_edid was overwritten without freeing the previous allocation, causing a memory leak on resume. [HOW] Free the previous drm_edid before updating it. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) Cc: stable@vger.kernel.org
12 daysdrm/amd/display: Do not skip unrelated mode changes in DSC validationYussuf Khalil
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5004 Fixes: 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check") Signed-off-by: Yussuf Khalil <dev@pp3345.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)
2026-03-17drm/amd: fix dcn 2.01 checkAndy Nguyen
The ASICREV_IS_BEIGE_GOBY_P check always took precedence, because it includes all chip revisions upto NV_UNKNOWN. Fixes: 54b822b3eac3 ("drm/amd/display: Use dce_version instead of chip_id") Signed-off-by: Andy Nguyen <theofficialflow1996@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9c7be0efa6f0daa949a5f3e3fdf9ea090b0713cb)
2026-03-17drm/amd/display: Fix DisplayID not-found handling in parse_edid_displayid_vrr()Srinivasan Shanmugam
parse_edid_displayid_vrr() searches the EDID extension blocks for a DisplayID extension before parsing the dynamic video timing range. The code previously checked whether edid_ext was NULL after the search loop. However, edid_ext is assigned during each iteration of the loop, so it will never be NULL once the loop has executed. If no DisplayID extension is found, edid_ext ends up pointing to the last extension block, and the NULL check does not correctly detect the failure case. Instead, check whether the loop completed without finding a matching DisplayID block by testing "i == edid->extensions". This ensures the function exits early when no DisplayID extension is present and avoids parsing an unrelated EDID extension block. Also simplify the EDID validation check using "!edid || !edid->extensions". Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:13079 parse_edid_displayid_vrr() warn: variable dereferenced before check 'edid_ext' (see line 13075) Fixes: a638b837d0e6 ("drm/amd/display: Fix refresh rate range for some panel") Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Sun peng Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 91c7e6342e98c846b259c57273436fdea4c043f2)
2026-03-17drm/amd/display: Wrap dcn32_override_min_req_memclk() in DC_FP_{START, END}Xi Ruoyao
[Why] The dcn32_override_min_req_memclk function is in dcn32_fpu.c, which is compiled with CC_FLAGS_FPU into FP instructions. So when we call it we must use DC_FP_{START,END} to save and restore the FP context, and prepare the FP unit on architectures like LoongArch where the FP unit isn't always on. Reported-by: LiarOnce <liaronce@hotmail.com> Fixes: ee7be8f3de1c ("drm/amd/display: Limit DCN32 8 channel or less parts to DPM1 for FPO") Signed-off-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 25bb1d54ba3983c064361033a8ec15474fece37e) Cc: stable@vger.kernel.org
2026-03-17drm/amd/display: Fix uninitialized variable use which breaks full LTOCalvin Owens
Commit e1b385726f7f ("drm/amd/display: Add additional checks for PSP footer size") introduced a use of an uninitialized stack variable in dm_dmub_sw_init() (region_params.bss_data_size). Interestingly, this seems to cause no issue on normal kernels. But when full LTO is enabled, it causes the compiler to "optimize" out huge swaths of amdgpu initialization code, and the driver is unusable: amdgpu 0000:03:00.0: [drm] Loading DMUB firmware via PSP: version=0x07002F00 amdgpu 0000:03:00.0: sw_init of IP block <dm> failed 5 amdgpu 0000:03:00.0: amdgpu_device_ip_init failed amdgpu 0000:03:00.0: Fatal error during GPU init It surprises me that neither gcc nor clang emit a warning about this: I only found it by bisecting the LTO breakage. Fix by using the bss_data_size field from fw_meta_info_params, as was presumably intended. Fixes: e1b385726f7f ("drm/amd/display: Add additional checks for PSP footer size") Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b7f1402f6ad24cc6b9a01fa09ebd1c6559d787d0)
2026-03-17drm/amd/display: Fix gamma 2.2 colorop TFsAlex Hung
Use GAMMA22 for degamma/blend and GAMMA22_INV for shaper so curves match the color pipeline. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5016 Tested-by: Xaver Hugl <xaver.hugl@kde.org> Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d8f9f42effd767ffa7bbcd7e05fbd6b20737e468)
2026-03-11drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21Ivan Lipski
[WHY] On DCN21, dccg2_init() is called in dcn10_init_hw() before bios_golden_init(). During S0i3 resume, BIOS sets MICROSECOND_TIME_BASE_DIV to 0x00120464 as a marker. dccg2_init() overwrites this to 0x00120264, causing dcn21_s0i3_golden_init_wa() to misdetect the state and skip golden init. Eventually during the resume sequence, a flip timeout occurs. [HOW] Skip DCCG on dccg2_is_s0i3_golden_init_wa_done() on DCN21. Fixes: 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c61eda434336cf2c033aa35efdc9a08b31d2fdfa)
2026-03-11drm/amd/display: Add missing DCCG register entries for DCN20-DCN316Ivan Lipski
Commit 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") moved register writes from hwseq to dccg2_*() functions but did not add the registers to the DCCG register list macros. The struct fields default to 0, so REG_WRITE() targets MMIO offset 0, causing a GPU hang on resume (seen on DCN21/DCN30 during IGT kms_cursor_crc@cursor-suspend). Add - MICROSECOND_TIME_BASE_DIV - MILLISECOND_TIME_BASE_DIV - DCCG_GATE_DISABLE_CNTL - DCCG_GATE_DISABLE_CNTL2 - DC_MEM_GLOBAL_PWR_REQ_CNTL to macros in dcn20_dccg.h, dcn301_dccg.h, dcn31_dccg.h, and dcn314_dccg.h. Fixes: 4c595e75110e ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.") Reported-by: Rafael Passos <rafael@rcpassos.me> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e6e2b956fc814de766d3480be7018297c41d3ce0)
2026-03-02drm/amd/display: Fallback to boot snapshot for dispclkDillon Varone
[WHY & HOW] If the dentist is unavailable, fallback to reading CLKIP via the boot snapshot to get the current dispclk. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2ab77600d1e55a042c02437326d3c7563e853c6c) Cc: stable@vger.kernel.org
2026-03-02drm/amd/display: Enable DEGAMMA and reject COLOR_PIPELINE+DEGAMMA_LUTAlex Hung
[WHAT] Create DEGAMMA properties even if color pipeline is enabled, and enforce the mutual exclusion in atomic check by rejecting any commit that attempts to enable both COLOR_PIPELINE on the plane and DEGAMMA_LUT on the CRTC simultaneously. Fixes: 18a4127e9315 ("drm/amd/display: Disable CRTC degamma when color pipeline is enabled") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4963 Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 196a6aa727f1f15eb54dda5e60a41543ea9397ee)
2026-03-02drm/amd/display: Use mpc.preblend flag to indicate 3D LUTAlex Hung
[WHAT] New ASIC's 3D LUT is indicated by mpc.preblend. Fixes: 0de2b1afea8d ("drm/amd/display: add 3D LUT colorop") Reviewed-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 43175f6164d32cb96362d16e357689f74298145c)
2026-02-25drm/amd/display: Use GFP_ATOMIC in dc_create_stream_for_sinkNatalie Vock
This can be called while preemption is disabled, for example by dcn32_internal_validate_bw which is called with the FPU active. Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31 machine. Signed-off-by: Natalie Vock <natalie.vock@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b42dae2ebc5c84a68de63ec4ffdfec49362d53f1) Cc: stable@vger.kernel.org
2026-02-22Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL usesKees Cook
Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-19drm/amd/display: Remove unneeded DAC link encoder registerTimur Kristóf
Not needed anymore since we use the VBIOS function. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Enable DAC in DCE link encoderTimur Kristóf
Ensure that the DAC output is enabled at the correct time by moving it to the DCE link encoder similarly to how digital outputs are enabled. This also removes the call to DAC1EncoderControl from the DCE HWSS, which always felt like it was a hacky solution. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Set CRTC source for DAC using registersTimur Kristóf
Apparently the VBIOS SelectCRTC_Source function overwrites a few registers (such as FMT_*) which DC writes in a different place, which can cause problems. Instead of using the SelectCRTC_Source function from the VBIOS, use the DAC_SOURCE_SELECT register directly, similarly to how it is done for digital link encoders. Fixes: 3be26d81b150 ("drm/amd/display: Support DAC in dce110_hwseq") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Initialize DAC in DCE link encoder using VBIOSTimur Kristóf
The VBIOS DAC1EncoderControl() function can initialize the DAC, by writing board-specific values to certain registers. Call this at link encoder hardware initialization time similarly to how the equivalent UNIPHYTransmitterControl initialization is done. This fixes DAC output on the Radeon HD 7790. Also remove the ENCODER_CONTROL_SETUP enum from the dac_encoder_control_prepare_params function which is actually not a supported operation for DAC encoders. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Turn off DAC in DCE link encoder using VBIOSTimur Kristóf
Apparently, the VBIOS DAC1EncoderControl function is much more graceful about turning off the DAC. It writes various DAC registers in a specific sequence. Use that instead of just clearing the DAC_ENABLE register. Do this in just the dce110_link_encoder_disable_output function and remove it from the HWSS. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Don't call find_analog_engine() twiceTimur Kristóf
The analog engine is already there in the link_analog_engine variable and assigned to enc_init_data.analog_engine already. I suspect this was a rebase mistake. Fixes: 436d0d22aa70 ("drm/amd/display: Pass proper DAC encoder ID to VBIOS") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Use same max plane scaling limits for all 64 bpp formatsMario Kleiner
The plane scaling hw seems to have the same min/max plane scaling limits for all 16 bpc / 64 bpp interleaved pixel color formats. Therefore add cases to amdgpu_dm_plane_get_min_max_dc_plane_scaling() for all the 16 bpc fixed-point / unorm formats to use the same .fp16 up/downscaling factor limits as used by the fp16 floating point formats. So far, 16 bpc unorm formats were not handled, and the default: path returned max/min factors for 32 bpp argb8888 formats, which were wrong and bigger than what many DCE / DCN hw generations could handle. The result sometimes was misscaling of framebuffers with DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616, DRM_FORMAT_XBGR16161616, DRM_FORMAT_ABGR16161616, leading to very wrong looking display, as tested on Polaris11 / DCE-11.2. So far this went unnoticed, because only few userspace clients used such 16 bpc unorm framebuffers, and those didn't use hw plane scaling, so they did not experience this issue. With upcoming Mesa 26 exposing 16 bpc unorm formats under both OpenGL and Vulkan under Wayland, and the upcoming GNOME 50 Mutter Wayland compositor allowing for direct scanout of these formats, the scaling hw will be used on these formats if possible for HiDPI display scaling, so it is important to use the correct hw scaling limits to avoid wrong display. Tested on AMD Polaris 11 / DCE 11.2 with upcoming Mesa 26 and GNOME 50 on HiDPI displays with scaling enabled. The mutter Wayland compositor now correctly falls back to scaling via desktop compositing instead of direct scanout, thereby avoiding wrong image display. For unscaled mode, it correctly uses direct scanout. Fixes: 580204038f5b ("drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Remove conditional for shaper 3DLUT power-onAlex Hung
[Why] Shaper programming has high chance to fail on first time after power-on or reboot. This can be verified by running IGT's kms_colorop. [How] Always power on the shaper and 3DLUT before programming by removing the debug flag of low power mode. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Check return of shaper curve to HW formatAlex Hung
[Why & How] Check return of cm3_helper_translate_curve_to_hw_format. This is reported as a CHECKED_RETURN error by Coverity. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Correct logic check error for fastbootCharlene Liu
[Why] Fix fastboot broken in driver. This is caused by an open source backport change 7495962c. from the comment, the intended check is to disable fastboot for pre-DCN10. but the logic check is reversed, and causes fastboot to be disabled on all DCN10 and after. fastboot is for driver trying to pick up bios used hw setting and bypass reprogramming the hw if dc_validate_boot_timing() condition meets. Fixes: 7495962cbceb ("drm/amd/display: Disable fastboot on DCE 6 too") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Skip eDP detection when no sinkSaidireddy Yenugu
[Why & How] When there is no eDP panel connected and during s0ix resume, unnecessary eDP power sequence and HPD happening, resulting in ~2 seconds delay. Fixed the issue by avoiding link detect for eDP connection with no sink in dm_resume. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Saidireddy Yenugu <Saidireddy.Yenugu@amd.com> Co-developed-by: ThummarDip Kishorbhai <ThummarDip.Kishorbhai@amd.com> Signed-off-by: ThummarDip Kishorbhai <ThummarDip.Kishorbhai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19Revert "drm/amd/display: Add Gfx Base Case For Linear Tiling Handling"Nicholas Carbones
This reverts commit 08a01ec306db ("drm/amd/display: Add Gfx Base Case For Linear Tiling Handling") Reason for revert: Got blank screen issues while doing PNP Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Nicholas Carbones <Nicholas.Carbones@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19Revert "drm/amd/display: Correct hubp GfxVersion verification"Nicholas Carbones
This reverts commit 3303aa64e7a6 ("drm/amd/display: Correct hubp GfxVersion verification") Reason for revert: Got blank screen issues while doing PNP Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Nicholas Carbones <Nicholas.Carbones@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19Revert "drm/amd/display: Add Handling for gfxversion DcGfxBase"Nicholas Carbones
This reverts commit 2e193f5b1b4f ("drm/amd/display: Add Handling for gfxversion DcGfxBase") Reason for revert: Cause some regressions Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Carbones <Nicholas.Carbones@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.Bhuvanachandra Pinninti
[Why] Direct DCCG register access in hwseq layer was creating register conflicts. [How] Migrated DCCG registers from hwseq-dccg component. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Implementing ramless idle mouse triggerMuaaz Nisar
[Why & How] Adding mouse trigger in dc_stream to recover from low refresh rate idle state upon mouse movement without vsync interrupts. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Muaaz Nisar <muaaz.nisar@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Disable SR feature on eDP1 by defaultCharlene Liu
[Why & How] Disable SR feature on eDP1 by default. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Expose functions of other dcn useDmytro Laktyushkin
[Why & HOw] Expose some functions for later dcns to reuse Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-18drm/amd/display: Add static keyword for sharpness tablesSamson Tam
[Why & How] Sharpness tables are only accessed in dc_spl_isharp_filters source file. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-18drm/amd/display: Only use analog stream encoder with analog engineTimur Kristóf
Some GPUs have analog connectors that work with a DP bridge chip and don't actually have an internal DAC: Those should not use the analog stream encoders. Fixes: 5834c33fd3f6 ("drm/amd/display: Add concept of analog encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-18drm/amd/display: Only use analog link encoder with analog engineTimur Kristóf
Some GPUs have analog connectors that work with a DP bridge chip and don't actually have an internal DAC: Those should not use the analog link encoder code path. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-18drm/amd/display: Use DCE 6 link encoder for DCE 6 analog connectorsTimur Kristóf
DCE 6 should use the DCE 6 specific link encoder. This was a copy paste mistake. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Fix out-of-bounds stream encoder index v3Srinivasan Shanmugam
eng_id can be negative and that stream_enc_regs[] can be indexed out of bounds. eng_id is used directly as an index into stream_enc_regs[], which has only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can access memory past the end of the array. Add a bounds check using ARRAY_SIZE() before using eng_id as an index. The unsigned cast also rejects negative values. This avoids out-of-bounds access. Fixes the below smatch error: dcn*_resource.c: stream_encoder_create() may index stream_enc_regs[eng_id] out of bounds (size 5). drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c 1246 static struct stream_encoder *dcn35_stream_encoder_create( 1247 enum engine_id eng_id, 1248 struct dc_context *ctx) 1249 { ... 1255 1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */ 1257 if (eng_id <= ENGINE_ID_DIGF) { ENGINE_ID_DIGF is 5. should <= be <? Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative? end_id is type signed long, but there are checks in the caller which prevent it from being negative. 1258 vpg_inst = eng_id; 1259 afmt_inst = eng_id; 1260 } else 1261 return NULL; 1262 ... 1281 1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios, 1283 eng_id, vpg, afmt, --> 1284 &stream_enc_regs[eng_id], ^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array. ... 1287 return &enc1->base; 1288 } v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast v3: The compiler already knows how to compare the two values, so the cast (int) is not needed. (Roman) Fixes: 2728e9c7c842 ("drm/amd/display: add DC changes for DCN351") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Mario Limonciello <superm1@kernel.org> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Reject cursor plane on DCE when scaled differently than primaryTimur Kristóf
Currently DCE doesn't support the overlay cursor, so the dm_crtc_get_cursor_mode() function returns DM_CURSOR_NATIVE_MODE unconditionally. The outcome is that it doesn't check for the conditions that would necessitate the overlay cursor, meaning that it doesn't reject cases where the native cursor mode isn't supported on DCE. Remove the early return from dm_crtc_get_cursor_mode() for DCE and instead let it perform the necessary checks and return DM_CURSOR_OVERLAY_MODE. Add a later check that rejects when DM_CURSOR_OVERLAY_MODE would be used with DCE. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4600 Suggested-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Fix dc_link NULL handling in HPD initSrinivasan Shanmugam
amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Cc: Timur Kristóf <timur.kristof@gmail.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Mario Limonciello <superm1@kernel.org> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Promote DC to 3.2.369Taimur Hassan
This version brings along following update: -Fix system resume lag issue -Correct hubp GfxVersion verification -Add parse all extension blocks for VSDB -Increase DCN35 SR enter/exit latency -Refactor virtual directory reorganize encoder and hwss files -Set enable_legacy_fast_update to false for DCN36 -Have dm_atomic_state context aligned with dc_state current -Avoid updating surface with the same surface under MPO Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: [FW Promotion] Release 0.1.46.0Taimur Hassan
Add some struct member and enum for panel replay Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Fix the incorrect type in dml_printAlex Hung
[Why & How] soc->max_outstanding_reqs is a dml_uint_t, not a dml_float_t. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: bypass post csc for additional color spaces in dalClay King
[Why] For RGB BT2020 full and limited color spaces, overlay adjustments were applied twice (once by MM and once by DAL). This results in incorrect colours and a noticeable difference between mpo and non-mpo cases. [How] Add RGB BT2020 full and limited color spaces to list that bypasses post csc adjustment. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Revert "Migrate DCCG register access from hwseq to dccg ↵Nicholas Carbones
component." [Why & How] This reverts commit 949adb4789fe3c24eea01d9c2efe94ab92694a0d, which causes regressions related to HDCP when resuming from S3. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Nicholas Carbones <ncarbone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-12drm/amd/display: Correct hubp GfxVersion verificationNicholas Carbones
[Why] DcGfxBase case was not accounted for in hubp program tiling functions, causing tiling corruption on PNP. [How] Add handling for DcGfxBase so that tiling gets properly cleared. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Carbones <ncarbone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-04 14:48:48 +0000