| Age | Commit message (Collapse) | Author |
|---|
|
A single AXIDMA controller can have one or two channels. When it has two
channels, the reset for both are tied together: resetting one channel
resets the other as well. This creates a problem where resetting one
channel will reset the registers for both channels, including clearing
interrupt enable bits for the other channel, which can then lead to
timeouts as the driver is waiting for an interrupt which never comes.
The driver currently has a probe-time work around for this: when a
channel is created, the driver also resets and enables the
interrupts. With two channels the reset for the second channel will
clear the interrupt enables for the first one. The work around in the
driver is just to manually enable the interrupts again in
xilinx_dma_alloc_chan_resources().
This workaround only addresses the probe-time issue. When channels are
reset at runtime (e.g., in xilinx_dma_terminate_all() or during error
recovery), there's no corresponding mechanism to restore the other
channel's interrupt enables. This leads to one channel having its
interrupts disabled while the driver expects them to work, causing
timeouts and DMA failures.
A proper fix is a complicated matter, as we should not reset the other
channel when it's operating normally. So, perhaps, there should be some
kind of synchronization for a common reset, which is not trivial to
implement. To add to the complexity, the driver also supports other DMA
types, like VDMA, CDMA and MCDMA, which don't have a shared reset.
However, when the two-channel AXIDMA is used in the (assumably) normal
use case, providing DMA for a single memory-to-memory device, the common
reset is a bit smaller issue: when something bad happens on one channel,
or when one channel is terminated, the assumption is that we also want
to terminate the other channel. And thus resetting both at the same time
is "ok".
With that line of thinking we can implement a bit better work around
than just the current probe time work around: let's enable the
AXIDMA interrupts at xilinx_dma_start_transfer() instead.
This ensures interrupts are enabled whenever a transfer starts,
regardless of any prior resets that may have cleared them.
This approach is also more logical: enable interrupts only when needed
for a transfer, rather than at resource allocation time, and, I think,
all the other DMA types should also use this model, but I'm reluctant to
do such changes as I cannot test them.
The reset function still enables interrupts even though it's not needed
for AXIDMA anymore, but it's common code for all DMA types (VDMA, CDMA,
MCDMA), so leave it unchanged to avoid affecting other variants.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Link: https://patch.msgid.link/20260311-xilinx-dma-fix-v2-1-a725abb66e3c@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The segment .control and .status fields both contain top bits which are
not part of the buffer size, the buffer size is located only in the bottom
max_buffer_len bits. To avoid interference from those top bits, mask out
the size using max_buffer_len first, and only then subtract the values.
Fixes: a575d0b4e663 ("dmaengine: xilinx_dma: Introduce xilinx_dma_get_residue")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316222530.163815-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The cyclic DMA calculation is currently entirely broken and reports
residue only for the first segment. The problem is twofold.
First, when the first descriptor finishes, it is moved from active_list
to done_list, but it is never returned back into the active_list. The
xilinx_dma_tx_status() expects the descriptor to be in the active_list
to report any meaningful residue information, which never happens after
the first descriptor finishes. Fix this up in xilinx_dma_start_transfer()
and if the descriptor is cyclic, lift it from done_list and place it back
into active_list list.
Second, the segment .status fields of the descriptor remain dirty. Once
the DMA did one pass on the descriptor, the .status fields are populated
with data by the DMA, but the .status fields are not cleared before reuse
during the next cyclic DMA round. The xilinx_dma_get_residue() recognizes
that as if the descriptor was complete and had 0 residue, which is bogus.
Reinitialize the status field before placing the descriptor back into the
active_list.
Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316221943.160375-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Unlike chan->direction , struct dma_device .directions field is a
bitfield. Turn chan->direction into a bitfield to make it compatible
with struct dma_device .directions .
Fixes: 7e01511443c3 ("dmaengine: xilinx_dma: Set dma_device directions")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316221728.160139-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Both rz_dmac_disable_hw() and rz_dmac_irq_handle_channel() update the
CHCTRL register. To avoid concurrency issues when configuring
functionalities exposed by this registers, take the virtual channel lock.
All other CHCTRL updates were already protected by the same lock.
Previously, rz_dmac_disable_hw() disabled and re-enabled local IRQs, before
accessing CHCTRL registers but this does not ensure race-free access.
Remove the local IRQ disable/enable code as well.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260316133252.240348-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver lists (ld_free, ld_queue) are used in
rz_dmac_free_chan_resources(), rz_dmac_terminate_all(),
rz_dmac_issue_pending(), and rz_dmac_irq_handler_thread(), all under
the virtual channel lock. Take the same lock in rz_dmac_prep_slave_sg()
and rz_dmac_prep_dma_memcpy() as well to avoid concurrency issues, since
these functions also check whether the lists are empty and update or
remove list entries.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260316133252.240348-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
At the end of this function, d is the traversal cursor of flist, but the
code completes found instead. This can lead to issues such as NULL pointer
dereferences, double completion, or descriptor leaks.
Fix this by completing d instead of found in the final
list_for_each_entry_safe() loop.
Fixes: aa8d18becc0c ("dmaengine: idxd: add callback support for iaa crypto")
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260106032428.162445-1-islituo@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret.
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014061309.283468-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
CYCLE_BIT bits for HDMA.
Others have submitted this issue (https://lore.kernel.org/dmaengine/
20240722030405.3385-1-zhengdongxiong@gxmicro.cn/),
but it has not been fixed yet. Therefore, more supplementary information
is provided here.
As mentioned in the "PCS-CCS-CB-TCB" Producer-Consumer Synchronization of
"DesignWare Cores PCI Express Controller Databook, version 6.00a":
1. The Consumer CYCLE_STATE (CCS) bit in the register only needs to be
initialized once; the value will update automatically to be
~CYCLE_BIT (CB) in the next chunk.
2. The Consumer CYCLE_BIT bit in the register is loaded from the LL
element and tested against CCS. When CB = CCS, the data transfer is
executed. Otherwise not.
The current logic sets customer (HDMA) CS and CB bits to 1 in each chunk
while setting the producer (software) CB of odd chunks to 0 and even
chunks to 1 in the linked list. This is leading to a mismatch between
the producer CB and consumer CS bits.
This issue can be reproduced by setting the transmission data size to
exceed one chunk. By the way, in the EDMA using the same "PCS-CCS-CB-TCB"
mechanism, the CS bit is only initialized once and this issue was not
found. Refer to
drivers/dma/dw-edma/dw-edma-v0-core.c:dw_edma_v0_core_start.
So fix this issue by initializing the CYCLE_STATE and CYCLE_BIT bits
only once.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Signed-off-by: LUO Haowen <luo-hw@foxmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/tencent_CB11AA9F3920C1911AF7477A9BD8EFE0AD05@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
During the device remove process, the device is reset, causing the
configuration registers to go back to their default state, which is
zero. As the driver is checking if the event log support was enabled
before deallocating, it will fail if a reset happened before.
Do not check if the support was enabled, the check for 'idxd->evl'
being valid (only allocated if the HW capability is available) is
enough.
Fixes: 244da66cda35 ("dmaengine: idxd: setup event log configuration")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-10-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It can happen that when the cdev .release() is called, the driver
already called ida_destroy(). Move ida_free() to the _del() path.
We see with DEBUG_KOBJECT_RELEASE enabled and forcing an early PCI
unbind.
Fixes: 04922b7445a1 ("dmaengine: idxd: fix cdev setup and free device lifetime issues")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-9-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released.
Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-8-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The workqueue associated with an DSA/IAA device is not released when
the object is freed.
Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-7-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the dmaengine "core" asks the driver to synchronize, send a Drain
operation to the device workqueue, which will wait for the already
submitted operations to finish.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-6-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When used as a dmaengine, the DMA "core" might ask the driver to
terminate all pending requests, when that happens, flush all pending
descriptors.
In this context, flush means removing the requests from the pending
lists, so even if they are completed after, the user is not notified.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-5-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When a Function Level Reset (FLR) happens, terminate the pending
descriptors that were issued by in-kernel users and disable the
interrupts associated with those. They will be re-enabled after FLR
finishes.
idxd_wq_flush_desc() is declared on idxd.h because it's going to be
used in by the DMA backend in a future patch.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-4-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In the case that the first Function Level Reset (FLR) concludes
correctly, but in the second FLR the scratch area for the saved
configuration cannot be allocated, it's possible for a invalid memory
access to happen.
Always set the deallocated scratch area to NULL after FLR completes.
Fixes: 98d187a98903 ("dmaengine: idxd: Enable Function Level Reset (FLR) for halt")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-3-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If reporting errors to the event log is not supported by the hardware,
and an error that causes Function Level Reset (FLR) is received, the
driver will try to restore the event log even if it was not allocated.
Also, only try to free the event log if it was properly allocated.
Fixes: 6078a315aec1 ("dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-2-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the check for IDXD_FLAG_CONFIGURABLE and the locking to "inside"
idxd_device_config(), as this is common to all callers, and the one
that wasn't holding the lock was an error (that was causing the
lockdep warning).
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-1-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When using MSI (not MSI-X) with multiple IRQs, the MSI data value
must be unique per vector to ensure correct interrupt delivery.
Currently, the driver fails to increment the MSI data per vector,
causing interrupts to be misrouted.
Fix this by caching the base MSI data and adjusting each vector's
data accordingly during IRQ setup.
Fixes: e63d79d1ff04 ("dmaengine: dw-edma: Add Synopsys DesignWare eDMA IP core driver")
Signed-off-by: Shenghui Shi <brody.shi@m2semi.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260209103726.414-1-brody.shi@m2semi.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Configure only the requested channel when a fixed channel is specified
to avoid modifying other channels unintentionally.
Fix parameter configuration when a fixed DMA channel is requested on
i.MX9 AON domain and i.MX8QM/QXP/DXL platforms. When a client requests
a fixed channel (e.g., channel 6), the driver traverses channels 0-5
and may unintentionally modify their configuration if they are unused.
This leads to issues such as setting the `is_multi_fifo` flag unexpectedly,
causing memcpy tests to fail when using the dmatest tool.
Only affect edma memcpy test when the channel is fixed.
Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250917-b4-edma-chanconf-v1-1-886486e02e91@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove().
Fixes: a9903de3aa16 ("dmaengine: fsl-edma: refactor using devm_clk_get_enabled")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-fsl-edma-clock-removal-v1-1-2025b49e7bcc@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-of-for-each-compatible-scoped-v3-10-c22fa2c0749a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,admac" anymore [1]. Use
"apple,t8103-admac" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Cc: stable@vger.kernel.org
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20251231-apple-admac-t8103-base-compat-v1-1-ec24a3708f76@jannau.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
Fixes: 7bedaa553760 ("dmaengine: add OMAP DMA engine driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix a memory leak in gpi_peripheral_config() where the original memory
pointed to by gchan->config could be lost if krealloc() fails.
The issue occurs when:
1. gchan->config points to previously allocated memory
2. krealloc() fails and returns NULL
3. The function directly assigns NULL to gchan->config, losing the
reference to the original memory
4. The original memory becomes unreachable and cannot be freed
Fix this by using a temporary variable to hold the krealloc() result
and only updating gchan->config when the allocation succeeds.
Found via static analysis and code review.
Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251029123421.91973-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260108105619.3513561-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of open coded variant let's use recently introduced helper.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Certain DSA 3.0 opcodes, such as Gather copy and Gather reduce, require max
SGL configured for workqueues prior to supporting these opcodes.
Configure the maximum scatter-gather list (SGL) size for workqueues during
setup on the supported HW. Application can then properly handle the SGL
size without explicitly setting it.
Signed-off-by: Yi Sun <yi.sun@intel.com>
Co-developed-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260107-idxd-yi-sun-dsa3-sgl-size-v2-2-dbef8f559e48@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Introduce sysfs interfaces for 3 new Data Streaming Accelerator (DSA)
capability registers (dsacap0-2) to enable userspace awareness of hardware
features in DSA version 3 and later devices.
Userspace components (e.g. configure libraries, workload Apps) require this
information to:
1. Select optimal data transfer strategies based on SGL capabilities
2. Enable hardware-specific optimizations for floating-point operations
3. Configure memory operations with proper numerical handling
4. Verify compute operation compatibility before submitting jobs
The output format is <dsacap2>,<dsacap1>,<dsacap0>, where each DSA
capability value is a 64-bit hexadecimal number, separated by commas.
The ordering follows the DSA 3.0 specification layout:
Offset: 0x190 0x188 0x180
Reg: dsacap2 dsacap1 dsacap0
Example:
cat /sys/bus/dsa/devices/dsa0/dsacaps
000000000000f18d,0014000e000007aa,00fa01ff01ff03ff
According to the DSA 3.0 specification, there are 15 fields defined for
the three dsacap registers. However, there's no need to define all
register structures unless a use case requires them. At this point,
support for the Scatter-Gather List (SGL) located in dsacap0 is necessary,
so only dsacap0 is defined accordingly.
For reference, the DSA 3.0 specification is available at:
Link: https://software.intel.com/content/www/us/en/develop/articles/intel-data-streaming-accelerator-architecture-specification.html
Signed-off-by: Yi Sun <yi.sun@intel.com>
Co-developed-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260107-idxd-yi-sun-dsa3-sgl-size-v2-1-dbef8f559e48@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The channel IRQ is only used inside the function rz_dmac_chan_probe(),
so there is no need to store it in the rz_dmac_chan structure for later
use.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/312c2e3349f4747e0bca861632bfc3592224b012.1767718556.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix a trivial typo in the comment, otherwise it takes an effort to
understand what it actually means to say.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251225173847.1395928-1-vz@mleia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In case of kernel runs in non-secure mode, the number of DMA channels can
be got from device tree since the value read from GTYPE register is "0" as
it's always secured.
As the number of channels can never be negative, update them to the type
"unsigned".
This is required for LAN969x.
Signed-off-by: Tony Han <tony.han@microchip.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20251203121208.1269487-1-robert.marko@sartura.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Simplify axi_dmac_parse_dt() by using the cleanup device_node class for
automatically releasing the of_node reference when going out of scope.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 398035178503bf662281bbffb4bebce1460a4bc5
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-4-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
