summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2026-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Quite a large pull request, partly due to skipping last week and therefore having material from ~all submaintainers in this one. About a fourth of it is a new selftest, and a couple more changes are large in number of files touched (fixing a -Wflex-array-member-not-at-end compiler warning) or lines changed (reformatting of a table in the API documentation, thanks rST). But who am I kidding---it's a lot of commits and there are a lot of bugs being fixed here, some of them on the nastier side like the RISC-V ones. ARM: - Correctly handle deactivation of interrupts that were activated from LRs. Since EOIcount only denotes deactivation of interrupts that are not present in an LR, start EOIcount deactivation walk *after* the last irq that made it into an LR - Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM is already enabled -- not only thhis isn't possible (pKVM will reject the call), but it is also useless: this can only happen for a CPU that has already booted once, and the capability will not change - Fix a couple of low-severity bugs in our S2 fault handling path, affecting the recently introduced LS64 handling and the even more esoteric handling of hwpoison in a nested context - Address yet another syzkaller finding in the vgic initialisation, where we would end-up destroying an uninitialised vgic with nasty consequences - Address an annoying case of pKVM failing to boot when some of the memblock regions that the host is faulting in are not page-aligned - Inject some sanity in the NV stage-2 walker by checking the limits against the advertised PA size, and correctly report the resulting faults PPC: - Fix a PPC e500 build error due to a long-standing wart that was exposed by the recent conversion to kmalloc_obj(); rip out all the ugliness that led to the wart RISC-V: - Prevent speculative out-of-bounds access using array_index_nospec() in APLIC interrupt handling, ONE_REG regiser access, AIA CSR access, float register access, and PMU counter access - Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(), kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr() - Fix potential null pointer dereference in kvm_riscv_vcpu_aia_rmw_topei() - Fix off-by-one array access in SBI PMU - Skip THP support check during dirty logging - Fix error code returned for Smstateen and Ssaia ONE_REG interface - Check host Ssaia extension when creating AIA irqchip x86: - Fix cases where CPUID mitigation features were incorrectly marked as available whenever the kernel used scattered feature words for them - Validate _all_ GVAs, rather than just the first GVA, when processing a range of GVAs for Hyper-V's TLB flush hypercalls - Fix a brown paper bug in add_atomic_switch_msr() - Use hlist_for_each_entry_srcu() when traversing mask_notifier_list, to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu - Ensure AVIC VMCB fields are initialized if the VM has an in-kernel local APIC (and AVIC is enabled at the module level) - Update CR8 write interception when AVIC is (de)activated, to fix a bug where the guest can run in perpetuity with the CR8 intercept enabled - Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by default) an unintentional tightening of userspace ABI in 6.17, and provides some amount of backwards compatibility with hypervisors who want to freeze PMCs on VM-Entry - Validate the VMCS/VMCB on return to a nested guest from SMM, because either userspace or the guest could stash invalid values in memory and trigger the processor's consistency checks Generic: - Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being unnecessary and confusing, triggered compiler warnings due to -Wflex-array-member-not-at-end - Document that vcpu->mutex is take outside of kvm->slots_lock and kvm->slots_arch_lock, which is intentional and desirable despite being rather unintuitive Selftests: - Increase the maximum number of NUMA nodes in the guest_memfd selftest to 64 (from 8)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8 Documentation: kvm: fix formatting of the quirks table KVM: x86: clarify leave_smm() return value selftests: kvm: add a test that VMX validates controls on RSM selftests: kvm: extract common functionality out of smm_test.c KVM: SVM: check validity of VMCB controls when returning from SMM KVM: VMX: check validity of VMCS controls when returning from SMM KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers() KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr() KVM: x86: hyper-v: Validate all GVAs during PV TLB flush KVM: x86: synthesize CPUID bits only if CPU capability is set KVM: PPC: e500: Rip out "struct tlbe_ref" KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type KVM: selftests: Increase 'maxnode' for guest_memfd tests KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2() ...
2026-03-15Merge tag 'powerpc-7.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - Fix KUAP warning in VMX usercopy path - Fix lockdep warning during PCI enumeration - Fix to move CMA reservations to arch_mm_preinit - Fix to check current->mm is alive before getting user callchain Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák, Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor Malik. * tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: fix lockdep warning during PCI enumeration powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx powerpc: fix KUAP warning in VMX usercopy path powerpc, perf: Check that current->mm is alive before getting user callchain powerpc/mem: Move CMA reservations to arch_mm_preinit
2026-03-13powerpc/iommu: fix lockdep warning during PCI enumerationNilay Shroff
Commit a75b2be249d6 ("iommu: Add iommu_driver_get_domain_for_dev() helper") introduced iommu_driver_get_domain_for_dev() for driver code paths that hold iommu_group->mutex while attaching a device to an IOMMU domain. The same commit also added a lockdep assertion in iommu_get_domain_for_dev() to ensure that callers do not hold iommu_group->mutex when invoking it. On powerpc platforms, when PCI device ownership is switched from BLOCKED to the PLATFORM domain, the attach callback spapr_tce_platform_iommu_attach_dev() still calls iommu_get_domain_for_dev(). This happens while iommu_group->mutex is held during domain switching, which triggers the lockdep warning below during PCI enumeration: WARNING: drivers/iommu/iommu.c:2252 at iommu_get_domain_for_dev+0x38/0x80, CPU#2: swapper/0/1 Modules linked in: CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc2+ #35 PREEMPT Hardware name: IBM,9105-22A Power11 (architected) 0x820200 0xf000007 of:IBM,FW1120.00 (RB1120_115) hv:phyp pSeries NIP: c000000000c244c4 LR: c00000000005b5a4 CTR: c00000000005b578 REGS: c00000000a7bf280 TRAP: 0700 Not tainted (7.0.0-rc2+) MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 22004422 XER: 0000000a CFAR: c000000000c24508 IRQMASK: 0 GPR00: c00000000005b5a4 c00000000a7bf520 c000000001dc8100 0000000000000001 GPR04: c00000000f972f10 0000000000000000 0000000000000000 0000000000000001 GPR08: 0000001ffbc60000 0000000000000001 0000000000000000 0000000000000000 GPR12: c00000000005b578 c000001fffffe480 c000000000011618 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: ffffffffffffefff 0000000000000000 c000000002d30eb0 0000000000000001 GPR24: c0000000017881f8 0000000000000000 0000000000000001 c00000000f972e00 GPR28: c00000000bbba0d0 0000000000000000 c00000000bbba0d0 c00000000f972e00 NIP [c000000000c244c4] iommu_get_domain_for_dev+0x38/0x80 LR [c00000000005b5a4] spapr_tce_platform_iommu_attach_dev+0x2c/0x98 Call Trace: iommu_get_domain_for_dev+0x68/0x80 (unreliable) spapr_tce_platform_iommu_attach_dev+0x2c/0x98 __iommu_attach_device+0x44/0x220 __iommu_device_set_domain+0xf4/0x194 __iommu_group_set_domain_internal+0xec/0x228 iommu_setup_default_domain+0x5f4/0x6a4 __iommu_probe_device+0x674/0x724 iommu_probe_device+0x50/0xb4 iommu_add_device+0x48/0x198 pci_dma_dev_setup_pSeriesLP+0x198/0x4f0 pcibios_bus_add_device+0x80/0x464 pci_bus_add_device+0x40/0x100 pci_bus_add_devices+0x54/0xb0 pcibios_init+0xd8/0x140 do_one_initcall+0x8c/0x598 kernel_init_freeable+0x3ec/0x850 kernel_init+0x34/0x270 ret_from_kernel_user_thread+0x14/0x1c Fix this by using iommu_driver_get_domain_for_dev() instead of iommu_get_domain_for_dev() in spapr_tce_platform_iommu_attach_dev(), which is the appropriate helper for callers holding the group mutex. Cc: stable@vger.kernel.org Fixes: a75b2be249d6 ("iommu: Add iommu_driver_get_domain_for_dev() helper") Closes: https://patchwork.ozlabs.org/project/linuxppc-dev/patch/d5c834ff-4c95-44dd-8bef-57242d63aeee@linux.ibm.com/ Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> [Maddy: Added Closes, tested and reviewed by tags] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260310082129.3630996-1-nilay@linux.ibm.com
2026-03-12powerpc: fix KUAP warning in VMX usercopy pathSayali Patil
On powerpc with PREEMPT_FULL or PREEMPT_LAZY and function tracing enabled, KUAP warnings can be triggered from the VMX usercopy path under memory stress workloads. KUAP requires that no subfunctions are called once userspace access has been enabled. The existing VMX copy implementation violates this requirement by invoking enter_vmx_usercopy() from the assembly path after userspace access has already been enabled. If preemption occurs in this window, the AMR state may not be preserved correctly, leading to unexpected userspace access state and resulting in KUAP warnings. Fix this by restructuring the VMX usercopy flow so that VMX selection and VMX state management are centralized in raw_copy_tofrom_user(), which is invoked by the raw_copy_{to,from,in}_user() wrappers. The new flow is: - raw_copy_{to,from,in}_user() calls raw_copy_tofrom_user() - raw_copy_tofrom_user() decides whether to use the VMX path based on size and CPU capability - Call enter_vmx_usercopy() before enabling userspace access - Enable userspace access as per the copy direction and perform the VMX copy - Disable userspace access as per the copy direction - Call exit_vmx_usercopy() - Fall back to the base copy routine if the VMX copy faults With this change, the VMX assembly routines no longer perform VMX state management or call helper functions; they only implement the copy operations. The previous feature-section based VMX selection inside __copy_tofrom_user_power7() is removed, and a dedicated __copy_tofrom_user_power7_vmx() entry point is introduced. This ensures correct KUAP ordering, avoids subfunction calls while KUAP is unlocked, and eliminates the warnings while preserving the VMX fast path. Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Reported-by: Shrikanth Hegde <sshegde@linux.ibm.com> Closes: https://lore.kernel.org/all/20260109064917.777587-2-sshegde@linux.ibm.com/ Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Signed-off-by: Sayali Patil <sayalip@linux.ibm.com> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260304122201.153049-1-sayalip@linux.ibm.com
2026-03-12powerpc, perf: Check that current->mm is alive before getting user callchainViktor Malik
It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952] Faulting instruction address: 0xc00000000020fac0 [26215.051957] Oops: Kernel access of bad area, sig: 11 [#1] [...] [26215.052049] Call Trace: [26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable) [26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30 [26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360 [26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0 [26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274 [...] In addition, move storing the top-level stack entry to generic perf_callchain_user to make sure the top-evel entry is always captured, even if current->mm is NULL. Fixes: 20002ded4d93 ("perf_counter: powerpc: Add callchain support") Signed-off-by: Viktor Malik <vmalik@redhat.com> Tested-by: Qiao Zhao <qzhao@redhat.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Reviewed-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> [Maddy: fixed message to avoid checkpatch format style error] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260309144045.169427-1-vmalik@redhat.com
2026-03-12powerpc/mem: Move CMA reservations to arch_mm_preinitRitesh Harjani (IBM)
commit 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model"), changed the initialization order of "pageblock_order" from... start_kernel() - setup_arch() - initmem_init() - sparse_init() - set_pageblock_order(); // this sets the pageblock_order - xxx_cma_reserve(); to... start_kernel() - setup_arch() - xxx_cma_reserve(); - mm_core_init_early() - free_area_init() - sparse_init() - set_pageblock_order() // this sets the pageblock_order. So this means, pageblock_order is not initialized before these cma reservation function calls, hence we are seeing CMA failures like... [ 0.000000] kvm_cma_reserve: reserving 3276 MiB for global area [ 0.000000] cma: pageblock_order not yet initialized. Called during early boot? [ 0.000000] cma: Failed to reserve 3276 MiB .... [ 0.000000][ T0] cma: pageblock_order not yet initialized. Called during early boot? [ 0.000000][ T0] cma: Failed to reserve 1024 MiB This patch moves these CMA reservations to arch_mm_preinit() which happens in mm_core_init() (which happens after pageblock_order is initialized), but before the memblock moves the free memory to buddy. Fixes: 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model") Suggested-by: Mike Rapoport <rppt@kernel.org> Reported-and-tested-by: Sourabh Jain <sourabhjain@linux.ibm.com> Closes: https://lore.kernel.org/linuxppc-dev/4c338a29-d190-44f3-8874-6cfa0a031f0b@linux.ibm.com/ Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Tested-by: Dan Horák <dan@danny.cz> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/6e532cf0db5be99afbe20eed699163d5e86cd71f.1772303986.git.ritesh.list@gmail.com
2026-03-11KVM: PPC: e500: Rip out "struct tlbe_ref"Sean Christopherson
Complete the ~13 year journey started by commit 47bf379742bf ("kvm/ppc/e500: eliminate tlb_refs"), and actually remove "struct tlbe_ref". No functional change intended (verified disassembly of e500_mmu.o and e500_mmu_host.o is identical before and after). Link: https://patch.msgid.link/20260303190339.974325-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2026-03-11KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong typeSean Christopherson
Fix a build error in kvmppc_e500_tlb_init() that was introduced by the conversion to use kzalloc_objs(), as KVM confusingly uses the size of the structure that is one and only field in tlbe_priv: arch/powerpc/kvm/e500_mmu.c:923:33: error: assignment to 'struct tlbe_priv *' from incompatible pointer type 'struct tlbe_ref *' [-Wincompatible-pointer-types] 923 | vcpu_e500->gtlb_priv[0] = kzalloc_objs(struct tlbe_ref, | ^ KVM has been flawed since commit 0164c0f0c404 ("KVM: PPC: e500: clear up confusion between host and guest entries"), but the issue went unnoticed until kmalloc_obj() came along and enforced types, as "struct tlbe_priv" was just a wrapper of "struct tlbe_ref" (why on earth the two ever existed separately...). Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types") Cc: Kees Cook <kees@kernel.org> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Link: https://patch.msgid.link/20260303190339.974325-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2026-03-11Merge tag 'kvm-x86-generic-7.0-rc3' of https://github.com/kvm-x86/linux into ↵Paolo Bonzini
HEAD KVM generic changes for 7.0 - Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being unnecessary and confusing, triggered compiler warnings due to -Wflex-array-member-not-at-end. - Document that vcpu->mutex is take outside of kvm->slots_lock and kvm->slots_arch_lock, which is intentional and desirable despite being rather unintuitive.
2026-03-11Merge tag 'powerpc-7.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - Correct MSI allocation tracking - Always use 64 bits PTE for powerpc/e500 - Fix inline assembly for clang build on PPC32 - Fixes for clang build issues in powerpc64/ftrace - Fixes for powerpc64/bpf JIT and tailcall support - Cleanup MPC83XX devicetrees - Fix keymile vendor prefix - Fix to use big-endian types for crash variables Thanks to Abhishek Dubey, Christophe Leroy (CS GROUP), Hari Bathini, Heiko Schocher, J. Neuschäfer, Mahesh Salgaonkar, Nam Cao, Nilay Shroff, Rob Herring (Arm), Saket Kumar Bhaskar, Sourabh Jain, Stan Johnson, and Venkat Rao Bagalkote. * tag 'powerpc-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits) powerpc/pseries: Correct MSI allocation tracking powerpc: dts: mpc83xx: Add unit addresses to /memory powerpc: dts: mpc8315erdb: Add missing #cells properties to SPI bus powerpc: dts: mpc8315erdb: Rename LED nodes to comply with schema powerpc: dts: mpc8315erdb: Use IRQ_TYPE_* macros powerpc: dts: mpc8313erdb: Use IRQ_TYPE_* macros powerpc: 83xx: km83xx: Fix keymile vendor prefix dt-bindings: powerpc: Add Freescale/NXP MPC83xx SoCs powerpc64/bpf: fix kfunc call support powerpc64/bpf: fix handling of BPF stack in exception callback powerpc64/bpf: remove BPF redzone protection in trampoline stack powerpc64/bpf: use consistent tailcall offset in trampoline powerpc64/bpf: fix the address returned by bpf_get_func_ip powerpc64/bpf: do not increment tailcall count when prog is NULL powerpc64/ftrace: workaround clang recording GEP in __patchable_function_entries powerpc64/ftrace: fix OOL stub count with clang powerpc64: make clang cross-build friendly powerpc/crash: adjust the elfcorehdr size powerpc/kexec/core: use big-endian types for crash variables powerpc/prom_init: Fixup missing #size-cells on PowerMac media-bay nodes ...
2026-03-07powerpc/pseries: Correct MSI allocation trackingNam Cao
The per-device MSI allocation calculation in pseries_irq_domain_alloc() is clearly wrong. It can still happen to work when nr_irqs is 1. Correct it. Fixes: c0215e2d72de ("powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> [maddy: Fixed Nilay's reviewed-by tag] Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260302003948.1452016-1-namcao@linutronix.de
2026-03-07powerpc: dts: mpc83xx: Add unit addresses to /memoryJ. Neuschäfer
This fixes dtschema warnings such as the following: arch/powerpc/boot/dts/mpc8315erdb.dtb: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303-mpc83xx-cleanup-v2-5-187d3a13effa@posteo.net
2026-03-07powerpc: dts: mpc8315erdb: Add missing #cells properties to SPI busJ. Neuschäfer
These properties are required by the spi-controller binding. Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303-mpc83xx-cleanup-v2-4-187d3a13effa@posteo.net
2026-03-07powerpc: dts: mpc8315erdb: Rename LED nodes to comply with schemaJ. Neuschäfer
The leds-gpio.yaml schema requires that GPIO LED nodes contain "led", and preferably start with "led-" Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303-mpc83xx-cleanup-v2-3-187d3a13effa@posteo.net
2026-03-07powerpc: dts: mpc8315erdb: Use IRQ_TYPE_* macrosJ. Neuschäfer
This increases readability, because "0x8" isn't very descriptive. mpc8315erdb.dtb remains identical after this patch. Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303-mpc83xx-cleanup-v2-2-187d3a13effa@posteo.net
2026-03-07powerpc: dts: mpc8313erdb: Use IRQ_TYPE_* macrosJ. Neuschäfer
This increases readability, because "0x8" isn't very descriptive. mpc8313erdb.dtb remains identical after this patch. Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303-mpc83xx-cleanup-v2-1-187d3a13effa@posteo.net
2026-03-07powerpc: 83xx: km83xx: Fix keymile vendor prefixJ. Neuschäfer
When kmeter.c was refactored into km83xx.c in 2011, the "keymile" vendor prefix was changed to upper-case "Keymile". The devicetree at arch/powerpc/boot/dts/kmeter1.dts never underwent the same change, suggesting that this was simply a mistake. Fixes: 93e2b95c81042d ("powerpc/83xx: rename and update kmeter1") Signed-off-by: J. Neuschäfer <j.ne@posteo.net> Reviewed-by: Heiko Schocher <hs@nabladev.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303-keymile-v1-1-463a11e71702@posteo.net
2026-03-07powerpc64/bpf: fix kfunc call supportHari Bathini
Commit 61688a82e047 ("powerpc/bpf: enable kfunc call") inadvertently enabled kfunc call support for 32-bit powerpc but that support will not be possible until ABI mismatch between 32-bit powerpc and eBPF is handled in 32-bit powerpc JIT code. Till then, advertise support only for 64-bit powerpc. Also, in powerpc ABI, caller needs to extend the arguments properly based on signedness. The JIT code is responsible for handling this explicitly for kfunc calls as verifier can't handle this for each architecture-specific ABI needs. But this was not taken care of while kfunc call support was enabled for powerpc. Fix it by handling this with bpf_jit_find_kfunc_model() and using zero_extend() & sign_extend() helper functions. Fixes: 61688a82e047 ("powerpc/bpf: enable kfunc call") Cc: stable@vger.kernel.org Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303181031.390073-7-hbathini@linux.ibm.com
2026-03-07powerpc64/bpf: fix handling of BPF stack in exception callbackHari Bathini
Exception callback reuses the stack frame of exception boundary. When exception boundary and exception callback programs have different BPF stack depth, the current stack unwind in exception callback will fail. Adjust the stack frame size of exception callback, in its prologue, if its BPF stack depth is different from that of exception boundary. Reported-by: bot+bpf-ci@kernel.org Closes: https://lore.kernel.org/bpf/2a310e86a59eb4c44c3ac9e5647814469d9c955580c9c0f1b3d9ca4a44717a34@mail.kernel.org/ Fixes: 11d45eee9f42 ("powerpc64/bpf: Additional NVR handling for bpf_throw") Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303181031.390073-6-hbathini@linux.ibm.com
2026-03-07powerpc64/bpf: remove BPF redzone protection in trampoline stackHari Bathini
Since bpf2bpf tailcall support is enabled for 64-bit powerpc with kernel commit 2ed2d8f6fb38 ("powerpc64/bpf: Support tailcalls with subprogs"), 'tailcalls/tailcall_bpf2bpf_hierarchy_fexit' BPF selftest is triggering "corrupted stack end detected inside scheduler" with the config option CONFIG_SCHED_STACK_END_CHECK enabled. While reviewing the stack layout for BPF trampoline, observed that the dummy frame is trying to protect the redzone of BPF program. This is because tail call info and NVRs save area are in redzone at the time of tailcall as the current BPF program stack frame is teared down before the tailcall. But saving this redzone in the dummy frame of trampoline is unnecessary because of the follow reasons: 1) Firstly, trampoline can be attached to BPF entry/main program or subprog. But prologue part of the BPF entry/main program, where the trampoline attachpoint is, is skipped during tailcall. So, protecting the redzone does not arise when the trampoline is not even triggered in this scenario. 2) In case of subprog, the caller's stackframe is already setup and the subprog's stackframe is yet to be setup. So, nothing on the redzone to be protected. Also, using dummy frame in BPF trampoline, wastes critically scarce kernel stack space, especially in tailcall sequence, for marginal benefit in stack unwinding. So, drop setting up the dummy frame. Instead, save return address in bpf trampoline frame and use it as appropriate. Pruning this unnecessary stack usage mitigates the likelihood of stack overflow in scenarios where bpf2bpf tailcalls and fexit programs are mixed. Reported-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> Fixes: 2ed2d8f6fb38 ("powerpc64/bpf: Support tailcalls with subprogs") Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303181031.390073-5-hbathini@linux.ibm.com
2026-03-07powerpc64/bpf: use consistent tailcall offset in trampolineHari Bathini
Ideally, the offset used to load the tail call info field and to find the pass by reference address for tail call field should be the same. But while setting up the tail call info in the trampoline, this was not followed. This can be misleading and can lead to unpredictable results if and when bpf_has_stack_frame() ends up returning true for trampoline frame. Since commit 15513beeb673 ("powerpc64/bpf: Moving tail_call_cnt to bottom of frame") and commit 2ed2d8f6fb38 ("powerpc64/bpf: Support tailcalls with subprogs") ensured tail call field is at the bottom of the stack frame for BPF programs as well as BPF trampoline, avoid relying on bpf_jit_stack_tailcallinfo_offset() and bpf_has_stack_frame() for trampoline frame and always calculate tail call field offset with reference to older frame. Fixes: 2ed2d8f6fb38 ("powerpc64/bpf: Support tailcalls with subprogs") Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303181031.390073-4-hbathini@linux.ibm.com
2026-03-07powerpc64/bpf: fix the address returned by bpf_get_func_ipHari Bathini
bpf_get_func_ip() helper function returns the address of the traced function. It relies on the IP address stored at ctx - 16 by the bpf trampoline. On 64-bit powerpc, this address is recovered from LR accounting for OOL trampoline. But the address stored here was off by 4-bytes. Ensure the address is the actual start of the traced function. Reported-by: Abhishek Dubey <adubey@linux.ibm.com> Fixes: d243b62b7bd3 ("powerpc64/bpf: Add support for bpf trampolines") Cc: stable@vger.kernel.org Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303181031.390073-3-hbathini@linux.ibm.com
2026-03-07powerpc64/bpf: do not increment tailcall count when prog is NULLHari Bathini
Do not increment tailcall count, if tailcall did not succeed due to missing BPF program. Fixes: ce0761419fae ("powerpc/bpf: Implement support for tail calls") Cc: stable@vger.kernel.org Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260303181031.390073-2-hbathini@linux.ibm.com
2026-03-07powerpc64/ftrace: workaround clang recording GEP in __patchable_function_entriesHari Bathini
Support for -fpatchable-function-entry on ppc64le was added in Clang with [1]. However, when no prefix NOPs are specified - as is the case with CONFIG_PPC_FTRACE_OUT_OF_LINE - the first NOP is emitted at LEP, but Clang records the Global Entry Point (GEP) unlike GCC which does record the Local Entry Point (LEP). Issue [2] has been raised to align Clang's behavior with GCC. As a temporary workaround to ensure ftrace initialization works as expected with Clang, derive the LEP using ppc_function_entry() for kernel symbols and by looking for the below module GEP sequence for module addresses, until [2] is resolved: ld r2, -8(r12) add r2, r2, r12 [1] https://github.com/llvm/llvm-project/pull/151569 [2] https://github.com/llvm/llvm-project/issues/163706 Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260127084926.34497-4-hbathini@linux.ibm.com
2026-03-07powerpc64/ftrace: fix OOL stub count with clangHari Bathini
The total number of out-of-line (OOL) stubs required for function tracing is determined using the following command: $(OBJDUMP) -r -j __patchable_function_entries vmlinux.o While this works correctly with GNU objdump, llvm-objdump does not list the expected relocation records for this section. Fix this by using the -d option and counting R_PPC64_ADDR64 relocation entries. This works as desired with both objdump and llvm-objdump. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260127084926.34497-3-hbathini@linux.ibm.com
2026-03-07powerpc64: make clang cross-build friendlyHari Bathini
ARCH_USING_PATCHABLE_FUNCTION_ENTRY depends on toolchain support for -fpatchable-function-entry option. The current script that checks for this support only handles GCC. Rename the script and extend it to detect support for -fpatchable-function-entry with Clang as well, allowing clean cross-compilation with Clang toolchains. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260127084926.34497-2-hbathini@linux.ibm.com
2026-03-06Merge tag 'kbuild-fixes-7.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux Pull Kbuild fixes from Nathan Chancellor: - Split out .modinfo section from ELF_DETAILS macro, as that macro may be used in other areas that expect to discard .modinfo, breaking certain image layouts - Adjust genksyms parser to handle optional attributes in certain declarations, necessary after commit 07919126ecfc ("netfilter: annotate NAT helper hook pointers with __rcu") - Include resolve_btfids in external module build created by scripts/package/install-extmod-build when it may be run on external modules - Avoid removing objtool binary with 'make clean', as it is required for external module builds * tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: kbuild: Leave objtool binary around with 'make clean' kbuild: install-extmod-build: Package resolve_btfids if necessary genksyms: Fix parsing a declarator with a preceding attribute kbuild: Split .modinfo out from ELF_DETAILS
2026-03-06Merge tag 'pci-v7.0-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Initialize msi_addr_mask for OF-created PCI devices to fix sparc and powerpc probe regressions (Nilay Shroff) - Orphan the Altera PCIe controller driver (Dave Hansen) * tag 'pci-v7.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: MAINTAINERS: Orphan Altera PCIe controller driver sparc/PCI: Initialize msi_addr_mask for OF-created PCI devices powerpc/pci: Initialize msi_addr_mask for OF-created PCI devices
2026-03-04powerpc/crash: adjust the elfcorehdr sizeSourabh Jain
With crash hotplug support enabled, additional memory is allocated to the elfcorehdr kexec segment to accommodate resources added during memory hotplug events. However, the kdump FDT is not updated with the same size, which can result in elfcorehdr corruption in the kdump kernel. Update elf_headers_sz (the kimage member representing the size of the elfcorehdr kexec segment) to reflect the total memory allocated for the elfcorehdr segment instead of the elfcorehdr buffer size at the time of kdump load. This allows of_kexec_alloc_and_setup_fdt() to reserve the full elfcorehdr memory in the kdump FDT and prevents elfcorehdr corruption. Fixes: 849599b702ef8 ("powerpc/crash: add crash memory hotplug support") Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260227171801.2238847-1-sourabhjain@linux.ibm.com
2026-03-04powerpc/kexec/core: use big-endian types for crash variablesSourabh Jain
Use explicit word-sized big-endian types for kexec and crash related variables. This makes the endianness unambiguous and avoids type mismatches that trigger sparse warnings. The change addresses sparse warnings like below (seen on both 32-bit and 64-bit builds): CHECK ../arch/powerpc/kexec/core.c sparse: expected unsigned int static [addressable] [toplevel] [usertype] crashk_base sparse: got restricted __be32 [usertype] sparse: warning: incorrect type in assignment (different base types) sparse: expected unsigned int static [addressable] [toplevel] [usertype] crashk_size sparse: got restricted __be32 [usertype] sparse: warning: incorrect type in assignment (different base types) sparse: expected unsigned long long static [addressable] [toplevel] mem_limit sparse: got restricted __be32 [usertype] sparse: warning: incorrect type in assignment (different base types) sparse: expected unsigned int static [addressable] [toplevel] [usertype] kernel_end sparse: got restricted __be32 [usertype] No functional change intended. Fixes: ea961a828fe7 ("powerpc: Fix endian issues in kexec and crash dump code") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202512221405.VHPKPjnp-lkp@intel.com/ Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20251224151257.28672-1-sourabhjain@linux.ibm.com
2026-03-04powerpc/prom_init: Fixup missing #size-cells on PowerMac media-bay nodesRob Herring (Arm)
Similar to other PowerMac mac-io devices, the media-bay node is missing the "#size-cells" property. Depends-on: commit 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling") Reported-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20251029174047.1620073-1-robh@kernel.org
2026-03-04powerpc: dts: fsl: Drop unused .dtsi filesRob Herring (Arm)
These files are not included by anything and therefore don't get built or tested. There's also no upstream driver for the interlaken-lac stuff. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260128140222.1627203-1-robh@kernel.org
2026-03-04powerpc/uaccess: Fix inline assembly for clang build on PPC32Christophe Leroy (CS GROUP)
Test robot reports the following error with clang-16.0.6: In file included from kernel/rseq.c:75: include/linux/rseq_entry.h:141:3: error: invalid operand for instruction unsafe_get_user(offset, &ucs->post_commit_offset, efault); ^ include/linux/uaccess.h:608:2: note: expanded from macro 'unsafe_get_user' arch_unsafe_get_user(x, ptr, local_label); \ ^ arch/powerpc/include/asm/uaccess.h:518:2: note: expanded from macro 'arch_unsafe_get_user' __get_user_size_goto(__gu_val, __gu_addr, sizeof(*(p)), e); \ ^ arch/powerpc/include/asm/uaccess.h:284:2: note: expanded from macro '__get_user_size_goto' __get_user_size_allowed(x, ptr, size, __gus_retval); \ ^ arch/powerpc/include/asm/uaccess.h:275:10: note: expanded from macro '__get_user_size_allowed' case 8: __get_user_asm2(x, (u64 __user *)ptr, retval); break; \ ^ arch/powerpc/include/asm/uaccess.h:258:4: note: expanded from macro '__get_user_asm2' " li %1+1,0\n" \ ^ <inline asm>:7:5: note: instantiated into assembly here li 31+1,0 ^ 1 error generated. On PPC32, for 64 bits vars a pair of registers is used. Usually the lower register in the pair is the high part and the higher register is the low part. GCC uses r3/r4 ... r11/r12 ... r14/r15 ... r30/r31 In older kernel code inline assembly was using %1 and %1+1 to represent 64 bits values. However here it looks like clang uses r31 as high part, allthough r32 doesn't exist hence the error. Allthoug %1+1 should work, most places now use %L1 instead of %1+1, so let's do the same here. With that change, the build doesn't fail anymore and a disassembly shows clang uses r17/r18 and r31/r14 pair when GCC would have used r16/r17 and r30/r31: Disassembly of section .fixup: 00000000 <.fixup>: 0: 38 a0 ff f2 li r5,-14 4: 3a 20 00 00 li r17,0 8: 3a 40 00 00 li r18,0 c: 48 00 00 00 b c <.fixup+0xc> c: R_PPC_REL24 .text+0xbc 10: 38 a0 ff f2 li r5,-14 14: 3b e0 00 00 li r31,0 18: 39 c0 00 00 li r14,0 1c: 48 00 00 00 b 1c <.fixup+0x1c> 1c: R_PPC_REL24 .text+0x144 Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602021825.otcItxGi-lkp@intel.com/ Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()") Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Acked-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/8ca3a657a650e497a96bfe7acde2f637dadab344.1770103646.git.chleroy@kernel.org
2026-03-04powerpc/e500: Always use 64 bits PTEChristophe Leroy
Today there are two PTE formats for e500: - The 64 bits format, used - On 64 bits kernel - On 32 bits kernel with 64 bits physical addresses - On 32 bits kernel with support of huge pages - The 32 bits format, used in other cases Maintaining two PTE formats means unnecessary maintenance burden because every change needs to be implemented and tested for both formats. Remove the 32 bits PTE format. The memory usage increase due to larger PTEs is minimal (approx. 0,1% of memory). This also means that from now on huge pages are supported also with 32 bits physical addresses. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/04a658209ea78dcc0f3dbde6b2c29cf1939adfe9.1767721208.git.chleroy@kernel.org
2026-03-03powerpc/pci: Initialize msi_addr_mask for OF-created PCI devicesNilay Shroff
Recent changes replaced the use of no_64bit_msi with msi_addr_mask. As a result, msi_addr_mask is now expected to be initialized to DMA_BIT_MASK(64) when a pci_dev is set up. However, this initialization was missed on powerpc due to differences in the device initialization path compared to other (x86) architecture. Due to this, now PCI device probe method fails on powerpc system. On powerpc systems, struct pci_dev instances are created from device tree nodes via of_create_pci_dev(). Because msi_addr_mask was not initialized there, it remained zero. Later, during MSI setup, msi_verify_entries() validates the programmed MSI address against pdev->msi_addr_mask. Since the mask was not set correctly, the validation fails, causing PCI driver probe failures for devices on powerpc systems. Initialize pdev->msi_addr_mask to DMA_BIT_MASK(64) in of_create_pci_dev() so that MSI address validation succeeds and device probe works as expected. Fixes: 386ced19e9a3 ("PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask") Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Tested-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Vivian Wang <wangruikang@iscas.ac.cn> Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260220070239.1693303-2-nilay@linux.ibm.com
2026-02-28KVM: always define KVM_CAP_SYNC_MMUPaolo Bonzini
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always available. Move the definition from individual architectures to common code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2026-02-28KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIERPaolo Bonzini
All architectures now use MMU notifier for KVM page table management. Remove the Kconfig symbol and the code that is used when it is disabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2026-02-26kbuild: Split .modinfo out from ELF_DETAILSNathan Chancellor
Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and ELF_DETAILS was present in all architecture specific vmlinux linker scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and COMMON_DISCARDS may be used by other linker scripts, such as the s390 and x86 compressed boot images, which may not expect to have a .modinfo section. In certain circumstances, this could result in a bootloader failing to load the compressed kernel [1]. Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with SecureBoot trailer") recently addressed this for the s390 bzImage but the same bug remains for arm, parisc, and x86. The presence of .modinfo in the x86 bzImage was the root cause of the issue worked around with commit d50f21091358 ("kbuild: align modinfo section for Secureboot Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition. Split .modinfo out from ELF_DETAILS into its own macro and handle it in all vmlinux linker scripts. Discard .modinfo in the places where it was previously being discarded from being in COMMON_DISCARDS, as it has never been necessary in those uses. Cc: stable@vger.kernel.org Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped") Reported-by: Ed W <lists@wildgooses.com> Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1] Tested-by: Ed W <lists@wildgooses.com> # x86_64 Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org>
2026-02-22Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL usesKees Cook
Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_flex' family to use the new default GFP_KERNEL argumentLinus Torvalds
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-12Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ...
2026-02-12Merge tag 'mm-stable-2026-02-11-19-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "powerpc/64s: do not re-activate batched TLB flush" makes arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev) It adds a generic enter/leave layer and switches architectures to use it. Various hacks were removed in the process. - "zram: introduce compressed data writeback" implements data compression for zram writeback (Richard Chang and Sergey Senozhatsky) - "mm: folio_zero_user: clear page ranges" adds clearing of contiguous page ranges for hugepages. Large improvements during demand faulting are demonstrated (David Hildenbrand) - "memcg cleanups" tidies up some memcg code (Chen Ridong) - "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos stats" improves DAMOS stat's provided information, deterministic control, and readability (SeongJae Park) - "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few issues in the hugetlb cgroup charging selftests (Li Wang) - "Fix va_high_addr_switch.sh test failure - again" addresses several issues in the va_high_addr_switch test (Chunyu Hu) - "mm/damon/tests/core-kunit: extend existing test scenarios" improves the KUnit test coverage for DAMON (Shu Anzai) - "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN (Shivank Garg) - "arch, mm: consolidate hugetlb early reservation" reworks and consolidates a pile of straggly code related to reservation of hugetlb memory from bootmem and creation of CMA areas for hugetlb (Mike Rapoport) - "mm: clean up anon_vma implementation" cleans up the anon_vma implementation in various ways (Lorenzo Stoakes) - "tweaks for __alloc_pages_slowpath()" does a little streamlining of the page allocator's slowpath code (Vlastimil Babka) - "memcg: separate private and public ID namespaces" cleans up the memcg ID code and prevents the internal-only private IDs from being exposed to userspace (Shakeel Butt) - "mm: hugetlb: allocate frozen gigantic folio" cleans up the allocation of frozen folios and avoids some atomic refcount operations (Kefeng Wang) - "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement of memory betewwn the active and inactive LRUs and adds auto-tuning of the ratio-based quotas and of monitoring intervals (SeongJae Park) - "Support page table check on PowerPC" makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan) - "nodemask: align nodes_and{,not} with underlying bitmap ops" makes nodes_and() and nodes_andnot() propagate the return values from the underlying bit operations, enabling some cleanup in calling code (Yury Norov) - "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up some DAMON internal interfaces (SeongJae Park) - "mm/khugepaged: cleanups and scan limit fix" does some cleanup work in khupaged and fixes a scan limit accounting issue (Shivank Garg) - "mm: balloon infrastructure cleanups" goes to town on the balloon infrastructure and its page migration function. Mainly cleanups, also some locking simplification (David Hildenbrand) - "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds additional tracepoints to the page reclaim code (Jiayuan Chen) - "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is part of Marco's kernel-wide migration from the legacy workqueue APIs over to the preferred unbound workqueues (Marco Crivellari) - "Various mm kselftests improvements/fixes" provides various unrelated improvements/fixes for the mm kselftests (Kevin Brodsky) - "mm: accelerate gigantic folio allocation" greatly speeds up gigantic folio allocation, mainly by avoiding unnecessary work in pfn_range_valid_contig() (Kefeng Wang) - "selftests/damon: improve leak detection and wss estimation reliability" improves the reliability of two of the DAMON selftests (SeongJae Park) - "mm/damon: cleanup kdamond, damon_call(), damos filter and DAMON_MIN_REGION" does some cleanup work in the core DAMON code (SeongJae Park) - "Docs/mm/damon: update intro, modules, maintainer profile, and misc" performs maintenance work on the DAMON documentation (SeongJae Park) - "mm: add and use vma_assert_stabilised() helper" refactors and cleans up the core VMA code. The main aim here is to be able to use the mmap write lock's lockdep state to perform various assertions regarding the locking which the VMA code requires (Lorenzo Stoakes) - "mm, swap: swap table phase II: unify swapin use" removes some old swap code (swap cache bypassing and swap synchronization) which wasn't working very well. Various other cleanups and simplifications were made. The end result is a 20% speedup in one benchmark (Kairui Song) - "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM available on 64-bit alpha, loongarch, mips, parisc, and um. Various cleanups were performed along the way (Qi Zheng) * tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits) mm/memory: handle non-split locks correctly in zap_empty_pte_table() mm: move pte table reclaim code to memory.c mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config um: mm: enable MMU_GATHER_RCU_TABLE_FREE parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE mips: mm: enable MMU_GATHER_RCU_TABLE_FREE LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles zsmalloc: make common caches global mm: add SPDX id lines to some mm source files mm/zswap: use %pe to print error pointers mm/vmscan: use %pe to print error pointers mm/readahead: fix typo in comment mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file() mm: refactor vma_map_pages to use vm_insert_pages mm/damon: unify address range representation with damon_addr_range mm/cma: replace snprintf with strscpy in cma_new_area ...
2026-02-11Merge tag 'net-next-7.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core & protocols: - A significant effort all around the stack to guide the compiler to make the right choice when inlining code, to avoid unneeded calls for small helper and stack canary overhead in the fast-path. This generates better and faster code with very small or no text size increases, as in many cases the call generated more code than the actual inlined helper. - Extend AccECN implementation so that is now functionally complete, also allow the user-space enabling it on a per network namespace basis. - Add support for memory providers with large (above 4K) rx buffer. Paired with hw-gro, larger rx buffer sizes reduce the number of buffers traversing the stack, dincreasing single stream CPU usage by up to ~30%. - Do not add HBH header to Big TCP GSO packets. This simplifies the RX path, the TX path and the NIC drivers, and is possible because user-space taps can now interpret correctly such packets without the HBH hint. - Allow IPv6 routes to be configured with a gateway address that is resolved out of a different interface than the one specified, aligning IPv6 to IPv4 behavior. - Multi-queue aware sch_cake. This makes it possible to scale the rate shaper of sch_cake across multiple CPUs, while still enforcing a single global rate on the interface. - Add support for the nbcon (new buffer console) infrastructure to netconsole, enabling lock-free, priority-based console operations that are safer in crash scenarios. - Improve the TCP ipv6 output path to cache the flow information, saving cpu cycles, reducing cache line misses and stack use. - Improve netfilter packet tracker to resolve clashes for most protocols, avoiding unneeded drops on rare occasions. - Add IP6IP6 tunneling acceleration to the flowtable infrastructure. - Reduce tcp socket size by one cache line. - Notify neighbour changes atomically, avoiding inconsistencies between the notification sequence and the actual states sequence. - Add vsock namespace support, allowing complete isolation of vsocks across different network namespaces. - Improve xsk generic performances with cache-alignment-oriented optimizations. - Support netconsole automatic target recovery, allowing netconsole to reestablish targets when underlying low-level interface comes back online. Driver API: - Support for switching the working mode (automatic vs manual) of a DPLL device via netlink. - Introduce PHY ports representation to expose multiple front-facing media ports over a single MAC. - Introduce "rx-polarity" and "tx-polarity" device tree properties, to generalize polarity inversion requirements for differential signaling. - Add helper to create, prepare and enable managed clocks. Device drivers: - Add Huawei hinic3 PF etherner driver. - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller. - Add ethernet driver for MaxLinear MxL862xx switches - Remove parallel-port Ethernet driver. - Convert existing driver timestamp configuration reporting to hwtstamp_get and remove legacy ioctl(). - Convert existing drivers to .get_rx_ring_count(), simplifing the RX ring count retrieval. Also remove the legacy fallback path. - Ethernet high-speed NICs: - Broadcom (bnxt, bng): - bnxt: add FW interface update to support FEC stats histogram and NVRAM defragmentation - bng: add TSO and H/W GRO support - nVidia/Mellanox (mlx5): - improve latency of channel restart operations, reducing the used H/W resources - add TSO support for UDP over GRE over VLAN - add flow counters support for hardware steering (HWS) rules - use a static memory area to store headers for H/W GRO, leading to 12% RX tput improvement - Intel (100G, ice, idpf): - ice: reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts - ice: introduces Synchronous Ethernet (SyncE) support - Meta (fbnic): - adds debugfs for firmware mailbox and tx/rx rings vectors - Ethernet virtual: - geneve: introduce GRO/GSO support for double UDP encapsulation - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - some code refactoring and cleanups - RealTek (r8169): - add support for RTL8127ATF (10G Fiber SFP) - add dash and LTR support - Airoha: - AN8811HB 2.5 Gbps phy support - Freescale (fec): - add XDP zero-copy support - Thunderbolt: - add get link setting support to allow bonding - Renesas: - add support for RZ/G3L GBETH SoC - Ethernet switches: - Maxlinear: - support R(G)MII slow rate configuration - add support for Intel GSW150 - Motorcomm (yt921x): - add DCB/QoS support - TI: - icssm-prueth: support bridging (STP/RSTP) via the switchdev framework - Ethernet PHYs: - Realtek: - enable SGMII and 2500Base-X in-band auto-negotiation - simplify and reunify C22/C45 drivers - Micrel: convert bindings to DT schema - CAN: - move skb headroom content into skb extensions, making CAN metadata access more robust - CAN drivers: - rcar_canfd: - add support for FD-only mode - add support for the RZ/T2H SoC - sja1000: cleanup the CAN state handling - WiFi: - implement EPPKE/802.1X over auth frames support - split up drop reasons better, removing generic RX_DROP - additional FTM capabilities: 6 GHz support, supported number of spatial streams and supported number of LTF repetitions - better mac80211 iterators to enumerate resources - initial UHR (Wi-Fi 8) support for cfg80211/mac80211 - WiFi drivers: - Qualcomm/Atheros: - ath11k: support for Channel Frequency Response measurement - ath12k: a significant driver refactor to support multi-wiphy devices and and pave the way for future device support in the same driver (rather than splitting to ath13k) - ath12k: support for the QCC2072 chipset - Intel: - iwlwifi: partial Neighbor Awareness Networking (NAN) support - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn - RealTek (rtw89): - preparations for RTL8922DE support - Bluetooth: - implement setsockopt(BT_PHY) to set the connection packet type/PHY - set link_policy on incoming ACL connections - Bluetooth drivers: - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE - btqca: add WCN6855 firmware priority selection feature" * tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits) bnge/bng_re: Add a new HSI net: macb: Fix tx/rx malfunction after phy link down and up af_unix: Fix memleak of newsk in unix_stream_connect(). net: ti: icssg-prueth: Add optional dependency on HSR net: dsa: add basic initial driver for MxL862xx switches net: mdio: add unlocked mdiodev C45 bus accessors net: dsa: add tag format for MxL862xx switches dt-bindings: net: dsa: add MaxLinear MxL862xx selftests: drivers: net: hw: Modify toeplitz.c to poll for packets octeontx2-pf: Unregister devlink on probe failure net: renesas: rswitch: fix forwarding offload statemachine ionic: Rate limit unknown xcvr type messages tcp: inet6_csk_xmit() optimization tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock() tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect() ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6 ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update() ipv6: use np->final in inet6_sk_rebuild_header() ipv6: add daddr/final storage in struct ipv6_pinfo net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup() ...
2026-02-11Merge tag 'devicetree-for-7.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8 - Add a for_each_compatible_node_scoped() loop and convert users in cpufreq, dmaengine, clk, cdx, powerpc and Arm - Simplify of/platform.c with scoped loop helpers - Add fw_devlink tracking for "mmc-pwrseq" - Optimize fw_devlink callback code size for pinctrl-N properties - Replace strcmp_suffix() with strends() DT bindings: - Support building single binding targets - Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst - Add bindings for Freescale AVIC, Realtek RTD1xxx system controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply, Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610 Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller, socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware - Lots of trivial binding fixes to address warnings in DTS files. These are mostly for arm64 platforms which is getting closer to be warning free. Some public shaming has helped. - Fix I2C bus node names in examples - Drop obsolete brcm,vulcan-soc binding - Drop unreferenced binding headers" * tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits) dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated cpufreq: s5pv210: Simplify with scoped for each OF child loop dmaengine: fsl_raid: Simplify with scoped for each OF child loop clk: imx: imx31: Simplify with scoped for each OF child loop clk: imx: imx27: Simplify with scoped for each OF child loop cdx: Use mutex guard to simplify error handling cdx: Simplify with scoped for each OF child loop powerpc/wii: Simplify with scoped for each OF child loop powerpc/fsp2: Simplify with scoped for each OF child loop ARM: exynos: Simplify with scoped for each OF child loop ARM: at91: Simplify with scoped for each OF child loop of: Add for_each_compatible_node_scoped() helper dt-bindings: Fix emails with spaces or missing brackets scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8 dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles of: reserved_mem: Fix placement of __free() annotation ...
2026-02-10Merge tag 'powerpc-7.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates for 7.0 - Implement masked user access - Add bpf support for internal only per-CPU instructions and inline the bpf_get_smp_processor_id() and bpf_get_current_task() functions - Fix pSeries MSI-X allocation failure when quota is exceeded - Fix recursive pci_lock_rescan_remove locking in EEH event handling - Support tailcalls with subprogs & BPF exceptions on 64bit - Extend "trusted" keys to support the PowerVM Key Wrapping Module (PKWM) Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li, Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote. * tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits) powerpc/pseries: plpks: export plpks_wrapping_is_supported docs: trusted-encryped: add PKWM as a new trust source keys/trusted_keys: establish PKWM as a trusted source pseries/plpks: add HCALLs for PowerVM Key Wrapping Module pseries/plpks: expose PowerVM wrapping features via the sysfs powerpc/pseries: move the PLPKS config inside its own sysfs directory pseries/plpks: fix kernel-doc comment inconsistencies powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() powerpc: kgdb: Remove OUTBUFMAX constant powerpc64/bpf: Additional NVR handling for bpf_throw powerpc64/bpf: Support exceptions powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT powerpc64/bpf: Avoid tailcall restore from trampoline powerpc64/bpf: Support tailcalls with subprogs powerpc64/bpf: Moving tail_call_cnt to bottom of frame powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf() powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs ...
2026-02-10Merge tag 'x86_paravirt_for_v7.0_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt updates from Borislav Petkov: - A nice cleanup to the paravirt code containing a unification of the paravirt clock interface, taming the include hell by splitting the pv_ops structure and removing of a bunch of obsolete code (Juergen Gross) * tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/paravirt: Use XOR r32,r32 to clear register in pv_vcpu_is_preempted() x86/paravirt: Remove trailing semicolons from alternative asm templates x86/pvlocks: Move paravirt spinlock functions into own header x86/paravirt: Specify pv_ops array in paravirt macros x86/paravirt: Allow pv-calls outside paravirt.h objtool: Allow multiple pv_ops arrays x86/xen: Drop xen_mmu_ops x86/xen: Drop xen_cpu_ops x86/xen: Drop xen_irq_ops x86/paravirt: Move pv_native_*() prototypes to paravirt.c x86/paravirt: Introduce new paravirt-base.h header x86/paravirt: Move paravirt_sched_clock() related code into tsc.c x86/paravirt: Use common code for paravirt_steal_clock() riscv/paravirt: Use common code for paravirt_steal_clock() loongarch/paravirt: Use common code for paravirt_steal_clock() arm64/paravirt: Use common code for paravirt_steal_clock() arm/paravirt: Use common code for paravirt_steal_clock() sched: Move clock related paravirt code to kernel/sched paravirt: Remove asm/paravirt_api_clock.h x86/paravirt: Move thunk macros to paravirt_types.h ...
2026-02-11powerpc/pseries: plpks: export plpks_wrapping_is_supportedSrish Srinivasan
Building trusted-keys as a module fails modpost with: ERROR: modpost: "plpks_wrapping_is_supported" [security/keys/trusted-keys/ trusted.ko] undefined! Export plpks_wrapping_is_supported() so trusted-keys links cleanly This patch is intended to be applied on top of the earlier "Extend "trusted " keys to support a new trust source named the PowerVM Key Wrapping Module (PKWM)" series (v5). Link: https://lore.kernel.org/all/20260127145228.48320-1-ssrish@linux.ibm.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602010724.1g9hbLKv-lkp@intel.com/ Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260201165344.950870-1-ssrish@linux.ibm.com
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-02 20:17:19 +0000