3 files changed, 18 insertions, 30 deletions

diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 9af969d2cc0c..25a99108caff 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -562,3 +562,4 @@ exc;	std	r10,32(3)
 	li	r5,4096
 	b	.Ldst_aligned
 EXPORT_SYMBOL(__copy_tofrom_user)
+EXPORT_SYMBOL(__copy_tofrom_user_base)
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
index 8474c682a178..17dbcfbae25f 100644
--- a/arch/powerpc/lib/copyuser_power7.S
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -5,13 +5,9 @@
  *
  * Author: Anton Blanchard <anton@au.ibm.com>
  */
+#include <linux/export.h>
 #include <asm/ppc_asm.h>
 
-#ifndef SELFTEST_CASE
-/* 0 == don't use VMX, 1 == use VMX */
-#define SELFTEST_CASE	0
-#endif
-
 #ifdef __BIG_ENDIAN__
 #define LVS(VRT,RA,RB)		lvsl	VRT,RA,RB
 #define VPERM(VRT,VRA,VRB,VRC)	vperm	VRT,VRA,VRB,VRC
@@ -47,10 +43,14 @@
 	ld	r15,STK_REG(R15)(r1)
 	ld	r14,STK_REG(R14)(r1)
 .Ldo_err3:
-	bl	CFUNC(exit_vmx_usercopy)
+	ld      r6,STK_REG(R31)(r1)	/* original destination pointer */
+	ld      r5,STK_REG(R29)(r1)	/* original number of bytes */
+	subf    r7,r6,r3		/* #bytes copied */
+	subf    r3,r7,r5		/* #bytes not copied in r3 */
 	ld	r0,STACKFRAMESIZE+16(r1)
 	mtlr	r0
-	b	.Lexit
+	addi    r1,r1,STACKFRAMESIZE
+	blr
 #endif /* CONFIG_ALTIVEC */
 
 .Ldo_err2:
@@ -74,7 +74,6 @@
 
 _GLOBAL(__copy_tofrom_user_power7)
 	cmpldi	r5,16
-	cmpldi	cr1,r5,3328
 
 	std	r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
 	std	r4,-STACKFRAMESIZE+STK_REG(R30)(r1)
@@ -82,12 +81,6 @@ _GLOBAL(__copy_tofrom_user_power7)
 
 	blt	.Lshort_copy
 
-#ifdef CONFIG_ALTIVEC
-test_feature = SELFTEST_CASE
-BEGIN_FTR_SECTION
-	bgt	cr1,.Lvmx_copy
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
 
 .Lnonvmx_copy:
 	/* Get the source 8B aligned */
@@ -263,23 +256,14 @@ err1;	stb	r0,0(r3)
 15:	li	r3,0
 	blr
 
-.Lunwind_stack_nonvmx_copy:
-	addi	r1,r1,STACKFRAMESIZE
-	b	.Lnonvmx_copy
-
-.Lvmx_copy:
 #ifdef CONFIG_ALTIVEC
+_GLOBAL(__copy_tofrom_user_power7_vmx)
 	mflr	r0
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
-	bl	CFUNC(enter_vmx_usercopy)
-	cmpwi	cr1,r3,0
-	ld	r0,STACKFRAMESIZE+16(r1)
-	ld	r3,STK_REG(R31)(r1)
-	ld	r4,STK_REG(R30)(r1)
-	ld	r5,STK_REG(R29)(r1)
-	mtlr	r0
 
+	std     r3,STK_REG(R31)(r1)
+	std     r5,STK_REG(R29)(r1)
 	/*
 	 * We prefetch both the source and destination using enhanced touch
 	 * instructions. We use a stream ID of 0 for the load side and
@@ -300,8 +284,6 @@ err1;	stb	r0,0(r3)
 
 	DCBT_SETUP_STREAMS(r6, r7, r9, r10, r8)
 
-	beq	cr1,.Lunwind_stack_nonvmx_copy
-
 	/*
 	 * If source and destination are not relatively aligned we use a
 	 * slower permute loop.
@@ -478,7 +460,8 @@ err3;	lbz	r0,0(r4)
 err3;	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
-	b	CFUNC(exit_vmx_usercopy)	/* tail call optimise */
+	li r3,0
+	blr
 
 .Lvmx_unaligned_copy:
 	/* Get the destination 16B aligned */
@@ -681,5 +664,7 @@ err3;	lbz	r0,0(r4)
 err3;	stb	r0,0(r3)
 
 15:	addi	r1,r1,STACKFRAMESIZE
-	b	CFUNC(exit_vmx_usercopy)	/* tail call optimise */
+	li r3,0
+	blr
+EXPORT_SYMBOL(__copy_tofrom_user_power7_vmx)
 #endif /* CONFIG_ALTIVEC */
diff --git a/arch/powerpc/lib/vmx-helper.c b/arch/powerpc/lib/vmx-helper.c
index 54340912398f..554b248002b4 100644
--- a/arch/powerpc/lib/vmx-helper.c
+++ b/arch/powerpc/lib/vmx-helper.c
@@ -27,6 +27,7 @@ int enter_vmx_usercopy(void)
 
 	return 1;
 }
+EXPORT_SYMBOL(enter_vmx_usercopy);
 
 /*
  * This function must return 0 because we tail call optimise when calling
@@ -49,6 +50,7 @@ int exit_vmx_usercopy(void)
 		set_dec(1);
 	return 0;
 }
+EXPORT_SYMBOL(exit_vmx_usercopy);
 
 int enter_vmx_ops(void)
 {