net: openvswitch: Avoid releasing netdev before teardown completes

The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.

The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:

[  998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[  998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[  998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[  998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[  998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[  998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[  998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[  998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[  998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[  998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[  998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[  998.393931] FS:  00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[  998.393936] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[  998.393944] PKRU: 55555554
[  998.393946] Call Trace:
[  998.393949]  <TASK>
[  998.393952]  ? show_trace_log_lvl+0x1b0/0x2f0
[  998.393961]  ? show_trace_log_lvl+0x1b0/0x2f0
[  998.393975]  ? dp_device_event+0x41/0x80 [openvswitch]
[  998.394009]  ? __die_body.cold+0x8/0x12
[  998.394016]  ? die_addr+0x3c/0x60
[  998.394027]  ? exc_general_protection+0x16d/0x390
[  998.394042]  ? asm_exc_general_protection+0x26/0x30
[  998.394058]  ? dev_set_promiscuity+0x8d/0xa0
[  998.394066]  ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[  998.394092]  dp_device_event+0x41/0x80 [openvswitch]
[  998.394102]  notifier_call_chain+0x5a/0xd0
[  998.394106]  unregister_netdevice_many_notify+0x51b/0xa60
[  998.394110]  rtnl_dellink+0x169/0x3e0
[  998.394121]  ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[  998.394125]  rtnetlink_rcv_msg+0x142/0x3f0
[  998.394128]  ? avc_has_perm_noaudit+0x69/0xf0
[  998.394130]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[  998.394132]  netlink_rcv_skb+0x50/0x100
[  998.394138]  netlink_unicast+0x292/0x3f0
[  998.394141]  netlink_sendmsg+0x21b/0x470
[  998.394145]  ____sys_sendmsg+0x39d/0x3d0
[  998.394149]  ___sys_sendmsg+0x9a/0xe0
[  998.394156]  __sys_sendmsg+0x7a/0xd0
[  998.394160]  do_syscall_64+0x7f/0x170
[  998.394162]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  998.394165] RIP: 0033:0x7fad61bf4724
[  998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[  998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[  998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[  998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[  998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[  998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2f8380
[  998.394196] R13: 0000000069b233d7 R14: 000055df0a256040 R15: 0000000000000000
[  998.394200]  </TASK>

To fix this, reorder the operations in ovs_netdev_detach_dev() to only
clear the flag after completing the other operations, and introduce an
smp_wmb() to make the ordering requirement explicit. The smp_wmb() is
paired with a full smp_mb() in netdev_destroy() to make sure the
call_rcu() invocation does not happen before the unregister operations
are visible.

Reported-by: Minxi Hou <mhou@redhat.com>
Tested-by: Minxi Hou <mhou@redhat.com>
Fixes: 549822767630 ("net: openvswitch: Avoid needlessly taking the RTNL on vport destroy")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260318155554.1133405-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 8 insertions, 1 deletions

diff --git a/net/openvswitch/vport-netdev.c b/net/openvswitch/vport-netdev.c
index 6574f9bcdc02..c688dee96503 100644
--- a/net/openvswitch/vport-netdev.c
+++ b/net/openvswitch/vport-netdev.c
@@ -151,11 +151,15 @@ static void vport_netdev_free(struct rcu_head *rcu)
 void ovs_netdev_detach_dev(struct vport *vport)
 {
 	ASSERT_RTNL();
-	vport->dev->priv_flags &= ~IFF_OVS_DATAPATH;
 	netdev_rx_handler_unregister(vport->dev);
 	netdev_upper_dev_unlink(vport->dev,
 				netdev_master_upper_dev_get(vport->dev));
 	dev_set_promiscuity(vport->dev, -1);
+
+	/* paired with smp_mb() in netdev_destroy() */
+	smp_wmb();
+
+	vport->dev->priv_flags &= ~IFF_OVS_DATAPATH;
 }
 
 static void netdev_destroy(struct vport *vport)
@@ -174,6 +178,9 @@ static void netdev_destroy(struct vport *vport)
 		rtnl_unlock();
 	}
 
+	/* paired with smp_wmb() in ovs_netdev_detach_dev() */
+	smp_mb();
+
 	call_rcu(&vport->rcu, vport_netdev_free);
 }