| Age | Commit message (Collapse) | Author |
|---|
|
The effective_xcpus of a cpuset can contain offline CPUs. In
partition_xcpus_del(), the xcpus parameter is incorrectly used as
a temporary cpumask to mask out offline CPUs. As xcpus can be the
effective_xcpus of a cpuset, this can result in unexpected changes
in that cpumask. Fix this problem by not making any changes to the
xcpus parameter.
Fixes: 11e5f407b64a ("cgroup/cpuset: Keep track of CPUs in isolated partitions")
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
This config option goes way back - it used to be an internal debug
option to random.c (at that point called DEBUG_RANDOM_BOOT), then was
renamed and exposed as a config option as CONFIG_WARN_UNSEEDED_RANDOM,
and then further renamed to the current CONFIG_WARN_ALL_UNSEEDED_RANDOM.
It was all done with the best of intentions: the more limited
rate-limited reports were reporting some cases, but if you wanted to see
all the gory details, you'd enable this "ALL" option.
However, it turns out - perhaps not surprisingly - that when people
don't care about and fix the first rate-limited cases, they most
certainly don't care about any others either, and so warning about all
of them isn't actually helping anything.
And the non-ratelimited reporting causes problems, where well-meaning
people enable debug options, but the excessive flood of messages that
nobody cares about will hide actual real information when things go
wrong.
I just got a kernel bug report (which had nothing to do with randomness)
where two thirds of the the truncated dmesg was just variations of
random: get_random_u32 called from __get_random_u32_below+0x10/0x70 with crng_init=0
and in the process early boot messages had been lost (in addition to
making the messages that _hadn't_ been lost harder to read).
The proper way to find these things for the hypothetical developer that
cares - if such a person exists - is almost certainly with boot time
tracing. That gives you the option to get call graphs etc too, which is
likely a requirement for fixing any problems anyway.
See Documentation/trace/boottime-trace.rst for that option.
And if we for some reason do want to re-introduce actual printing of
these things, it will need to have some uniqueness filtering rather than
this "just print it all" model.
Fixes: cc1e127bfa95 ("random: remove ratelimiting for in-kernel unseeded randomness")
Acked-by: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The module Kconfig file contains a set of options related to "Module
versioning support" (depends on MODVERSIONS) and "Module signature
verification" (depends on MODULE_SIG). The Kconfig tool automatically
creates submenus when an entry for a symbol is followed by consecutive
items that all depend on the symbol. However, this functionality doesn't
work for the mentioned module options. The MODVERSIONS options are
interleaved with ASM_MODVERSIONS, which has no 'depends on MODVERSIONS' but
instead uses 'default HAVE_ASM_MODVERSIONS && MODVERSIONS'. Similarly, the
MODULE_SIG options are interleaved by a comment warning not to forget
signing modules with scripts/sign-file, which uses the condition 'depends
on MODULE_SIG_FORCE && !MODULE_SIG_ALL'.
The result is that the options are confusingly shown when using
a menuconfig tool, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Fix the issue by using if/endif to group related options together in
kernel/module/Kconfig, similarly to how the MODULE_DEBUG options are
already grouped. Note that the signing-related options depend on
'MODULE_SIG || IMA_APPRAISE_MODSIG', with the exception of
MODULE_SIG_FORCE, which is valid only for MODULE_SIG and is therefore kept
separately. For consistency, do the same for the MODULE_COMPRESS entries.
The options are then properly placed into submenus, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
In the error path of load_module(), under the free_module label, the
code calls lockdep_free_key_range() to release lock classes associated
with the MOD_DATA, MOD_RODATA and MOD_RO_AFTER_INIT module regions, and
subsequently invokes module_deallocate().
Since commit ac3b43283923 ("module: replace module_layout with
module_memory"), the module_deallocate() function calls free_mod_mem(),
which releases the lock classes as well and considers all module
regions.
Attempting to free these classes twice is unnecessary. Remove the
redundant code in load_module().
Fixes: ac3b43283923 ("module: replace module_layout with module_memory")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer.
Closes: https://lore.kernel.org/oe-kbuild-all/202602020208.m7KIjdzW-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Haocheng Yu <yuhaocheng035@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260202162057.7237-1-yuhaocheng035@gmail.com
|
|
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470
Fixes: f4b07fd62d4d ("perf/core: Use POLLHUP for a pinned event in error")
Closes: https://lore.kernel.org/lkml/aD2w50VDvGIH95Pf@ly-workstation
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Link: https://patch.msgid.link/20250603045105.1731451-1-namhyung@kernel.org
|
|
Before rseq became extensible, its original size was 32 bytes even
though the active rseq area was only 20 bytes. This had the following
impact in terms of userspace ecosystem evolution:
* The GNU libc between 2.35 and 2.39 expose a __rseq_size symbol set
to 32, even though the size of the active rseq area is really 20.
* The GNU libc 2.40 changes this __rseq_size to 20, thus making it
express the active rseq area.
* Starting from glibc 2.41, __rseq_size corresponds to the
AT_RSEQ_FEATURE_SIZE from getauxval(3).
This means that users of __rseq_size can always expect it to
correspond to the active rseq area, except for the value 32, for
which the active rseq area is 20 bytes.
Exposing a 32 bytes feature size would make life needlessly painful
for userspace. Therefore, add a reserved field at the end of the
rseq area to bump the feature size to 33 bytes. This reserved field
is expected to be replaced with whatever field will come next,
expecting that this field will be larger than 1 byte.
The effect of this change is to increase the size from 32 to 64 bytes
before we actually have fields using that memory.
Clarify the allocation size and alignment requirements in the struct
rseq uapi comment.
Change the value returned by getauxval(AT_RSEQ_ALIGN) to return the
value of the active rseq area size rounded up to next power of 2, which
guarantees that the rseq structure will always be aligned on the nearest
power of two large enough to contain it, even as it grows. Change the
alignment check in the rseq registration accordingly.
This will minimize the amount of ABI corner-cases we need to document
and require userspace to play games with. The rule stays simple when
__rseq_size != 32:
#define rseq_field_available(field) (__rseq_size >= offsetofend(struct rseq_abi, field))
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-3-mathieu.desnoyers@efficios.com
|
|
The rseq registration validates that the rseq_size argument is greater
or equal to 32 (the original rseq size), but the comment associated with
this check does not clearly state this.
Clarify the comment to that effect.
Fixes: ee3e3ac05c26 ("rseq: Introduce extensible rseq ABI")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-2-mathieu.desnoyers@efficios.com
|
|
Kernel test robot reported that
tools/testing/selftests/kvm/hardware_disable_test was failing due to
commit 704069649b5b ("sched/core: Rework sched_class::wakeup_preempt()
and rq_modified_*()")
It turns out there were two related problems that could lead to a
missed preemption:
- when hitting newidle balance from the idle thread, it would elevate
rb->next_class from &idle_sched_class to &fair_sched_class, causing
later wakeup_preempt() calls to not hit the sched_class_above()
case, and not issue resched_curr().
Notably, this modification pattern should only lower the
next_class, and never raise it. Create two new helper functions to
wrap this.
- when doing schedule_idle(), it was possible to miss (re)setting
rq->next_class to &idle_sched_class, leading to the very same
problem.
Cc: Sean Christopherson <seanjc@google.com>
Fixes: 704069649b5b ("sched/core: Rework sched_class::wakeup_preempt() and rq_modified_*()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202602122157.4e861298-lkp@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260218163329.GQ1395416@noisy.programming.kicks-ass.net
|
|
Vincent reported that he was seeing undue lag clamping in a mixed
slice workload. Implement the max_slice tracking as per the todo
comment.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20250422101628.GA33555@noisy.programming.kicks-ass.net
|
|
In the EEVDF framework with Run-to-Parity protection, `se->vprot` is an
independent variable defining the virtual protection timestamp.
When `reweight_entity()` is called (e.g., via nice/renice), it performs
the following actions to preserve Lag consistency:
1. Scales `se->vlag` based on the new weight.
2. Calls `place_entity()`, which recalculates `se->vruntime` based on
the new weight and scaled lag.
However, the current implementation fails to update `se->vprot`, leading
to mismatches between the task's actual runtime and its expected duration.
Fixes: 63304558ba5d ("sched/eevdf: Curb wakeup-preemption")
Suggested-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260120123113.3518950-1-wangtao554@huawei.com
|
|
We should not (re)set slice protection in the sched_change pattern
which calls put_prev_task() / set_next_task().
Fixes: 63304558ba5d ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.561421378%40infradead.org
|
|
It turns out that zero_vruntime tracking is broken when there is but a single
task running. Current update paths are through __{en,de}queue_entity(), and
when there is but a single task, pick_next_task() will always return that one
task, and put_prev_set_next_task() will end up in neither function.
This can cause entity_key() to grow indefinitely large and cause overflows,
leading to much pain and suffering.
Furtermore, doing update_zero_vruntime() from __{de,en}queue_entity(), which
are called from {set_next,put_prev}_entity() has problems because:
- set_next_entity() calls __dequeue_entity() before it does cfs_rq->curr = se.
This means the avg_vruntime() will see the removal but not current, missing
the entity for accounting.
- put_prev_entity() calls __enqueue_entity() before it does cfs_rq->curr =
NULL. This means the avg_vruntime() will see the addition *and* current,
leading to double accounting.
Both cases are incorrect/inconsistent.
Noting that avg_vruntime is already called on each {en,de}queue, remove the
explicit avg_vruntime() calls (which removes an extra 64bit division for each
{en,de}queue) and have avg_vruntime() update zero_vruntime itself.
Additionally, have the tick call avg_vruntime() -- discarding the result, but
for the side-effect of updating zero_vruntime.
While there, optimize avg_vruntime() by noting that the average of one value is
rather trivial to compute.
Test case:
# taskset -c -p 1 $$
# taskset -c 2 bash -c 'while :; do :; done&'
# cat /sys/kernel/debug/sched/debug | awk '/^cpu#/ {P=0} /^cpu#2,/ {P=1} {if (P) print $0}' | grep -e zero_vruntime -e "^>"
PRE:
.zero_vruntime : 31316.407903
>R bash 487 50787.345112 E 50789.145972 2.800000 50780.298364 16 120 0.000000 0.000000 0.000000 /
.zero_vruntime : 382548.253179
>R bash 487 427275.204288 E 427276.003584 2.800000 427268.157540 23 120 0.000000 0.000000 0.000000 /
POST:
.zero_vruntime : 17259.709467
>R bash 526 17259.709467 E 17262.509467 2.800000 16915.031624 9 120 0.000000 0.000000 0.000000 /
.zero_vruntime : 18702.723356
>R bash 526 18702.723356 E 18705.523356 2.800000 18358.045513 9 120 0.000000 0.000000 0.000000 /
Fixes: 79f3f9bedd14 ("sched/eevdf: Fix min_vruntime vs avg_vruntime")
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.438854780%40infradead.org
|
|
dma_addr is unitialized in dma_direct_map_phys() when swiotlb is forced
and DMA_ATTR_MMIO is set which leads to random value print out in
warning. Fix that by just returning DMA_MAPPING_ERROR.
Fixes: e53d29f957b3 ("dma-mapping: convert dma_direct_*map_page to be phys_addr_t based")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260209153809.250835-2-jiri@resnulli.us
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible dereference of uninitialized pointer
When validating the persistent ring buffer on boot up, if the first
validation fails, a reference to "head_page" is performed in the
error path, but it skips over the initialization of that variable.
Move the initialization before the first validation check.
- Fix use of event length in validation of persistent ring buffer
On boot up, the persistent ring buffer is checked to see if it is
valid by several methods. One being to walk all the events in the
memory location to make sure they are all valid. The length of the
event is used to move to the next event. This length is determined by
the data in the buffer. If that length is corrupted, it could
possibly make the next event to check located at a bad memory
location.
Validate the length field of the event when doing the event walk.
- Fix function graph on archs that do not support use of ftrace_ops
When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means
that its function graph tracer uses the ftrace_ops of the function
tracer to call its callbacks. This allows a single registered
callback to be called directly instead of checking the callback's
meta data's hash entries against the function being traced.
For architectures that do not support this feature, it must always
call the loop function that tests each registered callback (even if
there's only one). The loop function tests each callback's meta data
against its hash of functions and will call its callback if the
function being traced is in its hash map.
The issue was that there was no check against this and the direct
function was being called even if the architecture didn't support it.
This meant that if function tracing was enabled at the same time as a
callback was registered with the function graph tracer, its callback
would be called for every function that the function tracer also
traced, even if the callback's meta data only wanted to be called
back for a small subset of functions.
Prevent the direct calling for those architectures that do not
support it.
- Fix references to trace_event_file for hist files
The hist files used event_file_data() to get a reference to the
associated trace_event_file the histogram was attached to. This would
return a pointer even if the trace_event_file is about to be freed
(via RCU). Instead it should use the event_file_file() helper that
returns NULL if the trace_event_file is marked to be freed so that no
new references are added to it.
- Wake up hist poll readers when an event is being freed
When polling on a hist file, the task is only awoken when a hist
trigger is triggered. This means that if an event is being freed
while there's a task waiting on its hist file, it will need to wait
until the hist trigger occurs to wake it up and allow the freeing to
happen. Note, the event will not be completely freed until all
references are removed, and a hist poller keeps a reference. But it
should still be woken when the event is being freed.
* tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Wake up poll waiters for hist files when removing an event
tracing: Fix checking of freed trace_event_file for hist files
fgraph: Do not call handlers direct when not using ftrace_ops
tracing: ring-buffer: Fix to check event length before using
ring-buffer: Fix possible dereference of uninitialized pointer
|
|
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove macros from proc handler converters
Replace the proc converter macros with "regular" functions. Though it
is more verbose than the macro version, it helps when debugging and
better aligns with coding-style.rst.
- General cleanup
Remove superfluous ctl_table forward declarations. Const qualify the
memory_allocation_profiling_sysctl and loadpin_sysctl_table arrays.
Add missing kernel doc to proc_dointvec_conv.
- Testing
This series was run through sysctl selftests/kunit test suite in
x86_64. And went into linux-next after rc4, giving it a good 3 weeks
of testing
* tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions
sysctl: Replace unidirectional INT converter macros with functions
sysctl: Add kernel doc to proc_douintvec_conv
sysctl: Replace UINT converter macros with functions
sysctl: Add CONFIG_PROC_SYSCTL guards for converter macros
sysctl: clarify proc_douintvec_minmax doc
sysctl: Return -ENOSYS from proc_douintvec_conv when CONFIG_PROC_SYSCTL=n
sysctl: Remove unused ctl_table forward declarations
loadpin: Implement custom proc_handler for enforce
alloc_tag: move memory_allocation_profiling_sysctls into .rodata
sysctl: Add missing kernel-doc for proc_dointvec_conv
|
|
There's an unpleasant corner case in unshare(2), when we have a
CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that
case copy_mnt_ns() gets passed current->fs instead of a private copy,
which causes interesting warts in proof of correctness]
> I guess if private means fs->users == 1, the condition could still be true.
Unfortunately, it's worse than just a convoluted proof of correctness.
Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
(and current->fs->users == 1).
We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and
flips current->fs->{pwd,root} to corresponding locations in the new namespace.
Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
destroyed and its mount tree is dissolved, but... current->fs->root and
current->fs->pwd are both left pointing to now detached mounts.
They are pinning those, so it's not a UAF, but it leaves the calling
process with unshare(2) failing with -ENOMEM _and_ leaving it with
pwd and root on detached isolated mounts. The last part is clearly a bug.
There is other fun related to that mess (races with pivot_root(), including
the one between pivot_root() and fork(), of all things), but this one
is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
fs_struct even if it hadn't been shared in the first place". Sure, we could
go for something like "if both CLONE_NEWNS *and* one of the things that might
end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
force allocation of new fs_struct", but let's keep it simple - the cost
of copy_fs_struct() is trivial.
Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
a freshly allocated fs_struct, yet to be attached to anything. That
seriously simplifies the analysis...
FWIW, that bug had been there since the introduction of unshare(2) ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20260207082524.GE3183987@ZenIV
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are two small changes that add some missing SPDX license lines to
some core kernel files. These are:
- adding SPDX license lines to kdb files
- adding SPDX license lines to the remaining kernel/ files
Both of these have been in linux-next for a while with no reported
issues"
* tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
kernel: debug: Add SPDX license ids to kdb files
kernel: add SPDX-License-Identifier lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more block updates from Jens Axboe:
- Fix partial IOVA mapping cleanup in error handling
- Minor prep series ignoring discard return value, as
the inline value is always known
- Ensure BLK_FEAT_STABLE_WRITES is set for drbd
- Fix leak of folio in bio_iov_iter_bounce_read()
- Allow IOC_PR_READ_* for read-only open
- Another debugfs deadlock fix
- A few doc updates
* tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq: use NOIO context to prevent deadlock during debugfs creation
blk-stat: convert struct blk_stat_callback to kernel-doc
block: fix enum descriptions kernel-doc
block: update docs for bio and bvec_iter
block: change return type to void
nvmet: ignore discard return value
md: ignore discard return value
block: fix partial IOVA mapping cleanup in blk_rq_dma_map_iova
block: fix folio leak in bio_iov_iter_bounce_read()
block: allow IOC_PR_READ_* ioctls with BLK_OPEN_READ
drbd: always set BLK_FEAT_STABLE_WRITES
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
- pid: introduce task_ppid_vnr() helper
- pidfs: convert rb-tree to rhashtable
Mateusz reported performance penalties during task creation because
pidfs uses pidmap_lock to add elements into the rbtree. Switch to an
rhashtable to have separate fine-grained locking and to decouple from
pidmap_lock moving all heavy manipulations outside of it
Also move inode allocation outside of pidmap_lock. With this there's
nothing happening for pidfs under pidmap_lock
- pid: reorder fields in pid_namespace to reduce false sharing
- Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie
callers"
- ipc: Add SPDX license id to mqueue.c
* tag 'kernel-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pid: introduce task_ppid_vnr() helper
pidfs: implement ino allocation without the pidmap lock
Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers"
pid: reorder fields in pid_namespace to reduce false sharing
pidfs: convert rb-tree to rhashtable
ipc: Add SPDX license id to mqueue.c
|
|
Creating debugfs entries can trigger fs reclaim, which can enter back
into the block layer request_queue. This can cause deadlock if the
queue is frozen.
Previously, a WARN_ON_ONCE check was used in debugfs_create_files()
to detect this condition, but it was racy since the queue can be frozen
from another context at any time.
Introduce blk_debugfs_lock()/blk_debugfs_unlock() helpers that combine
the debugfs_mutex with memalloc_noio_save()/restore() to prevent fs
reclaim from triggering block I/O. Also add blk_debugfs_lock_nomemsave()
and blk_debugfs_unlock_nomemrestore() variants for callers that don't
need NOIO protection (e.g., debugfs removal or read-only operations).
Replace all raw debugfs_mutex lock/unlock pairs with these helpers,
using the _nomemsave/_nomemrestore variants where appropriate.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs9gNKEYAPagD9JADfO5UH+OiCr4P7OO2wjpfOYeM-RV=A@mail.gmail.com/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/aYWQR7CtYdk3K39g@shinmob/
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes updates from Masami Hiramatsu:
- Use a dedicated kernel thread to optimize the kprobes instead of
using workqueue thread. Since the kprobe optimizer waits a long time
for synchronize_rcu_task(), it can block other workers in the same
queue if it uses a workqueue.
- kprobe-events: return immediately if no new probe events are
specified on the kernel command line at boot time. This shortens
the kernel boot time.
- When a kprobe is fully removed from the kernel code, retry optimizing
another kprobe which is blocked by that kprobe.
* tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Use dedicated kthread for kprobe optimizer
tracing: kprobe-event: Return directly when trace kprobes is empty
kprobes: retry blocked optprobe in do_free_cleaned_kprobes
|
|
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b15361d ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
legacy_kthread_func-> console_flush_one_record -> vt_console_print-> lf
-> con_scroll -> fbcon_scroll
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Fixes: 5f53ca3ff83b4 ("printk: Implement legacy printer kthread for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping update from Marek Szyprowski:
"A small code cleanup for the DMA-mapping subsystem: removal of unused
hooks (Robin Murphy)"
* tag 'dma-mapping-7.0-2026-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Remove dma_mark_clean (again)
|
|
The add_fd_from_fd_array() function takes a file descriptor as a
parameter and tries to add either map or btf to the corresponding
list of used objects. As was reported by Dan Carpenter, since the
commit c81e4322acf0 ("bpf: Fix a potential use-after-free of BTF
object"), the fdget() is called twice on the file descriptor, and
thus userspace, potentially, can replace the file pointed to by the
file descriptor in between the two calls. On practice, this shouldn't
break anything on the kernel side, but for consistency fix the code
such that only one fdget() is executed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aY689z7gHNv8rgVO@stanley.mountain/
Fixes: ccd2d799ed44 ("bpf: Fix a potential use-after-free of BTF object")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260213212949.759321-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI)
Reported-by: syzbot+5a0f1995634f7c1dadbf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5a0f1995634f7c1dadbf
Fixes: 76145f725532 ("bpf: Refactor check_pseudo_btf_id")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260209132904.63908-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
|
|
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
|
|
Pull CXL updates from Dave Jiang:
- Introduce cxl_memdev_attach and pave way for soft reserved handling,
type2 accelerator enabling, and LSA 2.0 enabling. All these series
require the endpoint driver to settle before continuing the memdev
driver probe.
- Address CXL port error protocol handling and reporting.
The large patch series was split into three parts. The first two
parts are included here with the final part coming later.
The first part consists of a series of code refactoring to PCI AER
sub-system that addresses CXL and also CXL RAS code to prepare for
port error handling.
The second part refactors the CXL code to move management of
component registers to cxl_port objects to allow all CXL AER errors
to be handled through the cxl_port hierarchy.
- Provide AMD Zen5 platform address translation for CXL using ACPI
PRMT. This includes a conventions document to explain why this is
needed and how it's implemented.
- Misc CXL patches of fixes, cleanups, and updates. Including CXL
address translation for unaligned MOD3 regions.
[ TLA service: CXL is "Compute Express Link" ]
* tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits)
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
...
|
|
The following pr_warn() provides detailed error and location information,
WARN_ON(err) adds no additional debugging value, so remove the redundant
WARN_ON() call.
Link: https://lkml.kernel.org/r/20260212111146.210086-3-ranxiaokai627@163.com
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "two fixes in kho_populate()", v3.
This patch (of 2):
kho_populate() returns without calling early_memunmap() on success path,
this will cause early ioremap virtual address space leak.
Link: https://lkml.kernel.org/r/20260212111146.210086-1-ranxiaokai627@163.com
Link: https://lkml.kernel.org/r/20260212111146.210086-2-ranxiaokai627@163.com
Fixes: b50634c5e84a ("kho: cleanup error handling in kho_populate()")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We will be shortly removing the vm_flags_t field from vm_area_desc so we
need to update all mmap_prepare users to only use the dessc->vma_flags
field.
This patch achieves that and makes all ancillary changes required to make
this possible.
This lays the groundwork for future work to eliminate the use of
vm_flags_t in vm_area_desc altogether and more broadly throughout the
kernel.
While we're here, we take the opportunity to replace VM_REMAP_FLAGS with
VMA_REMAP_FLAGS, the vma_flags_t equivalent.
No functional changes intended.
Link: https://lkml.kernel.org/r/fb1f55323799f09fe6a36865b31550c9ec67c225.1769097829.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org> [zonefs]
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Yury Norov <ynorov@nvidia.com>
Cc: Chris Mason <clm@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/vmscan: fix demotion targets checks in reclaim/demotion",
v9.
This patch series addresses two issues in demote_folio_list(),
can_demote(), and next_demotion_node() in reclaim/demotion.
1. demote_folio_list() and can_demote() do not correctly check
demotion target against cpuset.mems_effective, which will cause (a)
pages to be demoted to not-allowed nodes and (b) pages fail demotion
even if the system still has allowed demotion nodes.
Patch 1 fixes this bug by updating cpuset_node_allowed() and
mem_cgroup_node_allowed() to return effective_mems, allowing directly
logic-and operation against demotion targets.
2. next_demotion_node() returns a preferred demotion target, but it
does not check the node against allowed nodes.
Patch 2 ensures that next_demotion_node() filters against the allowed
node mask and selects the closest demotion target to the source node.
This patch (of 2):
Fix two bugs in demote_folio_list() and can_demote() due to incorrect
demotion target checks against cpuset.mems_effective in reclaim/demotion.
Commit 7d709f49babc ("vmscan,cgroup: apply mems_effective to reclaim")
introduces the cpuset.mems_effective check and applies it to can_demote().
However:
1. It does not apply this check in demote_folio_list(), which leads
to situations where pages are demoted to nodes that are
explicitly excluded from the task's cpuset.mems.
2. It checks only the nodes in the immediate next demotion hierarchy
and does not check all allowed demotion targets in can_demote().
This can cause pages to never be demoted if the nodes in the next
demotion hierarchy are not set in mems_effective.
These bugs break resource isolation provided by cpuset.mems. This is
visible from userspace because pages can either fail to be demoted
entirely or are demoted to nodes that are not allowed in multi-tier memory
systems.
To address these bugs, update cpuset_node_allowed() and
mem_cgroup_node_allowed() to return effective_mems, allowing directly
logic-and operation against demotion targets. Also update can_demote()
and demote_folio_list() accordingly.
Bug 1 reproduction:
Assume a system with 4 nodes, where nodes 0-1 are top-tier and
nodes 2-3 are far-tier memory. All nodes have equal capacity.
Test script:
echo 1 > /sys/kernel/mm/numa/demotion_enabled
mkdir /sys/fs/cgroup/test
echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control
echo "0-2" > /sys/fs/cgroup/test/cpuset.mems
echo $$ > /sys/fs/cgroup/test/cgroup.procs
swapoff -a
# Expectation: Should respect node 0-2 limit.
# Observation: Node 3 shows significant allocation (MemFree drops)
stress-ng --oomable --vm 1 --vm-bytes 150% --mbind 0,1
Bug 2 reproduction:
Assume a system with 6 nodes, where nodes 0-2 are top-tier,
node 3 is a far-tier node, and nodes 4-5 are the farthest-tier nodes.
All nodes have equal capacity.
Test script:
echo 1 > /sys/kernel/mm/numa/demotion_enabled
mkdir /sys/fs/cgroup/test
echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control
echo "0-2,4-5" > /sys/fs/cgroup/test/cpuset.mems
echo $$ > /sys/fs/cgroup/test/cgroup.procs
swapoff -a
# Expectation: Pages are demoted to Nodes 4-5
# Observation: No pages are demoted before oom.
stress-ng --oomable --vm 1 --vm-bytes 150% --mbind 0,1,2
Link: https://lkml.kernel.org/r/20260114205305.2869796-1-bingjiao@google.com
Link: https://lkml.kernel.org/r/20260114205305.2869796-2-bingjiao@google.com
Fixes: 7d709f49babc ("vmscan,cgroup: apply mems_effective to reclaim")
Signed-off-by: Bing Jiao <bingjiao@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Refactor da_monitor to minimize macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including
the header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
* tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix documentation reference in da_monitor.h
verification/rvgen: Remove unused variable declaration from containers
verification/dot2c: Remove superfluous enum assignment and add last comma
verification/dot2c: Remove __buff_to_string() and cleanup
verification/rvgen: Annotate DA functions with types
verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h
Documentation/rv: Adapt documentation after da_monitor refactoring
rv: Cleanup da_monitor after refactor
rv: Refactor da_monitor to minimise macros
|
