| Age | Commit message (Collapse) | Author |
|---|
|
The chip configuration hook is the one responsible to actually switch
the switch between bus interfaces. It is natural to give it the bus
interface we expect with a new parameter. For now the only value we can
give is SSDR, but this is subject to change in the future, so add a bit
of extra logic in the implementations of this callback to make sure
both the core and the chip driver are aligned on the request.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a bus interface enumeration, currently only containing the
one we support: SSDR, for single SDR, so any operation whose command is
sent over a single data line in SDR mode, ie. any operation matching
1S-XX-XX.
The main spinand_device structure gets a new parameter to store this
enumeration, for now unused. Of course it is set to SSDR during the SSDR
templates initialization to further clarify the state we are in at the
moment.
This member is subject to be used to know in which bus configuration we
and be updated by the core when we switch to faster mode(s).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
It is probably safe to expect that all SPI controller drivers will ever
support all the most basic SPI NAND operations, such as write enable,
register reads, page program, block erases, etc. However, what about
vendor specific operations? So far nobody complained about it, but as we
are about to introduce octal DTR support, and as none of the SPI NAND
instruction set is defined in any standard, we must remain careful about
these extra operations.
One way to make sure we do not blindly get ourselves in strange
situations with vendor commands failing silently is to make the check
once for all, while probing the chip. However at this stage we have no
such list, so let's add the necessary infrastructure to allow:
- registering vendor operations,
- checking they are actually supported when appropriate.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a SPINAND_OP() macro to which we give the name of the operation
we want. This macro retrieves the correct operation template based on
the current bus interface (currently only single SDR, will soon be
extended to octal DTR) and fills it with the usual parameters.
This macro makes the transition from calling directly the low-level
macros into using the (bus interface dependent) templates very smooth.
Use it in all places that can be trivially converted. At this stage
there is no functional change expected, until octal DTR support gets
added.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Currently, the SPI NAND core implementation directly calls macros to get
the various operations in shape. These macros are specific to the bus
interface, currently only supporting the single SDR interface (any
command following the 1S-XX-XX pattern).
Introducing support for other bus interfaces (such as octal DTR) would
mean that every user of these macros should become aware of the current
bus interface and act accordingly, picking up and adapting to the
current configuration. This would add quite a bit of boilerplate, be
repetitive as well as error prone in case we miss one occurrence.
Instead, let's create a table with all SPI NAND memory operations that
are currently supported. We initialize them with the same single SDR _OP
macros as before. This opens the possibility for users of the individual
macros to make use of these templates instead. This way, when we will add
another bus interface, we can just switch to another set of templates
and all users will magically fill in their spi_mem_op structures with
the correct ops.
The existing read, write and update cache variants are also moved in
this template array, which is barely noticeable by callers as we also
add a structure member pointing to it.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In order to introduce templates for all operations and not only for page
helpers (in order to introduce octal DDR support), decouple the WR_EN
and WR_DIS operations into two separate macros.
Adapt the callers accordingly.
There is no functional change.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
SPI NAND command values are directly included in the macros defining the
ops. These are stale definitions, they are unused so drop them.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The @data buffer is 5 bytes, not 4, it has been extended for the need of
devices with an extra ID bytes.
Fixes: 34a956739d29 ("mtd: spinand: Add support for 5-byte IDs")
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In octal DTR mode addresses may either be long enough to cover at least
two bytes (in which case the existing macro works), or otherwise for
single byte addresses, the byte must also be duplicated and sent twice:
on each front of the clock.
Create a macro for this common case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
spi: Octal DTR support
This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.
Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. 9 are cc:stable, 12 are for MM.
There's a patch series from Pratyush Yadav which fixes a few things in
the new-in-6.19 LUO memfd code.
Plus the usual shower of singletons - please see the changelogs for
details"
* tag 'mm-hotfixes-stable-2026-01-29-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
vmcoreinfo: make hwerr_data visible for debugging
mm/zone_device: reinitialize large zone device private folios
mm/mm_init: don't cond_resched() in deferred_init_memmap_chunk() if called from deferred_grow_zone()
mm/kfence: randomize the freelist on initialization
kho: kho_preserve_vmalloc(): don't return 0 when ENOMEM
kho: init alloc tags when restoring pages from reserved memory
mm: memfd_luo: restore and free memfd_luo_ser on failure
mm: memfd_luo: use memfd_alloc_file() instead of shmem_file_setup()
memfd: export alloc_file()
flex_proportions: make fprop_new_period() hardirq safe
mailmap: add entry for Viacheslav Bocharov
mm/memory-failure: teach kill_accessing_process to accept hugetlb tail page pfn
mm/memory-failure: fix missing ->mf_stats count in hugetlb poison
mm, swap: restore swap_space attr aviod kernel panic
mm/kasan: fix KASAN poisoning in vrealloc()
mm/shmem, swap: fix race of truncate and swap entry split
|
|
ext4 and f2fs are largely using the same code to read a page full
of Merkle tree blocks from the page cache, and the upcoming xfs
fsverity support would add another copy.
Move the ext4 code to fs/verity/ and use it in f2fs as well. For f2fs
this removes the previous f2fs-specific error injection, but otherwise
the behavior remains unchanged.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Link: https://lore.kernel.org/r/20260128152630.627409-7-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
This will make an iomap implementation of the method easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Link: https://lore.kernel.org/r/20260128152630.627409-6-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Free the fsverity_info directly in clear_inode instead of requiring file
systems to handle it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Link: https://lore.kernel.org/r/20260128152630.627409-3-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the check to reject truncates of fsverity files directly to
setattr_prepare instead of requiring the file system to handle it.
Besides removing boilerplate code, this also fixes the complete lack of
such check in btrfs.
Fixes: 146054090b08 ("btrfs: initial fsverity support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Link: https://lore.kernel.org/r/20260128152630.627409-2-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
'calibrate' was a one-shot event sent to the sensor to calibrate itself.
It is used on Bosch sensors (BMI160, BMA254).
Light sensors work differently: They are first put in calibration mode,
tests are run to collect information and calculate the calibration
values to apply. Once done, the sensors are put back in normal mode.
Accept boolean true and false (not just true) to enter/exit calibration
state.
Check "echo 0 > calibrate" is supported.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Insert a "*" in the kernel-doc line to resolve a warning:
Warning: include/linux/iio/frequency/ad9523.h:47 bad line:
LSB = 1/2 of a period of the divider input clock.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Resolve all kernel-doc warnings in buffer_impl.h:
Warning: include/linux/iio/buffer_impl.h:172 struct member 'direction' not described in 'iio_buffer'
Warning: include/linux/iio/buffer_impl.h:184 No description found for return value of 'iio_update_buffers'
Also correct one typo (word order switch) and remove one stray space
in a kernel-doc comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
pidfs and nsfs recently gained support for encode/decode of file handles
via name_to_handle_at(2)/open_by_handle_at(2).
These special kernel filesystems have custom ->open() and ->permission()
export methods, which nfsd does not respect and it was never meant to be
used for exporting those filesystems by nfsd.
Therefore, do not allow nfsd to export filesystems with custom ->open()
or ->permission() methods.
Fixes: b3caba8f7a34a ("pidfs: implement file handle support")
Fixes: 5222470b2fbb3 ("nsfs: support file handles")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260129100212.49727-3-amir73il@gmail.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
pidfs and nsfs recently gained support for encode/decode of file handles
via name_to_handle_at(2)/open_by_handle_at(2).
These special kernel filesystems have custom ->open() and ->permission()
export methods, which nfsd does not respect and it was never meant to be
used for exporting those filesystems by nfsd.
Update kernel-doc comments to express the fact the those methods are for
open_by_handle(2) system only and not compatible with nfsd.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260129100212.49727-2-amir73il@gmail.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fs-verity introduced inode flag for inodes with enabled fs-verity on
them. This patch adds FS_XFLAG_VERITY file attribute which can be
retrieved with FS_IOC_FSGETXATTR ioctl() and file_getattr() syscall.
This flag is read-only and can not be set with corresponding set ioctl()
and file_setattr(). The FS_IOC_SETFLAGS requires file to be opened for
writing which is not allowed for verity files. The FS_IOC_FSSETXATTR and
file_setattr() clears this flag from the user input.
As this is now common flag for both flag interfaces (flags/xflags) add
it to overlapping flags list to exclude it from overwrite.
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://patch.msgid.link/20260126115658.27656-2-aalbersh@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The language definition was extracted from the new
draft-ietf-nfsv4-posix-acls specification. This ensures good
constant and type name alignment between the spec and the Linux
kernel source code, and brings in some basic XDR utilities for
handling NFSv4 POSIX draft ACLs.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
XDR specification files can contain lines prefixed with '%' that
pass through unchanged to generated output. Traditional rpcgen
removes the '%' and emits the remainder verbatim, allowing direct
insertion of C includes, pragma directives, or other language-
specific content into the generated code.
Until now, xdrgen silently discarded these lines during parsing.
This prevented specifications from including necessary headers or
preprocessor directives that might be required for the generated
code to compile correctly.
The grammar now captures pass-through lines instead of ignoring
them. A new AST node type represents pass-through content, and
the AST transformer strips the leading '%' character. Definition
and source generators emit pass-through content in document order,
preserving the original placement within the specification.
This brings xdrgen closer to feature parity with traditional
rpcgen while maintaining the existing document-order processing
model.
Existing generated xdrgen source code has been regenerated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Three architectures (x86, aarch64, riscv) have support for indirect
branch tracking feature in a very similar fashion. On a very high
level, indirect branch tracking is a CPU feature where CPU tracks
branches which use a memory operand to transfer control. As part of
this tracking, during an indirect branch, the CPU expects a landing
pad instruction on the target PC, and if not found, the CPU raises
some fault (architecture-dependent).
x86 landing pad instr - 'ENDBRANCH'
arch64 landing pad instr - 'BTI'
riscv landing instr - 'lpad'
Given that three major architectures have support for indirect branch
tracking, this patch creates architecture-agnostic 'prctls' to allow
userspace to control this feature. They are:
- PR_GET_INDIR_BR_LP_STATUS: Get the current configured status for indirect
branch tracking.
- PR_SET_INDIR_BR_LP_STATUS: Set the configuration for indirect branch
tracking.
The following status options are allowed:
- PR_INDIR_BR_LP_ENABLE: Enables indirect branch tracking on user
thread.
- PR_INDIR_BR_LP_DISABLE: Disables indirect branch tracking on user
thread.
- PR_LOCK_INDIR_BR_LP_STATUS: Locks configured status for indirect branch
tracking for user thread.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-13-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description, code comments]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates
This adds:
- A socinfo entry for the MT8371 Genio 520 SoC
- Support for the Dynamic Voltage and Frequency Scaling
Resource Controller (DVFSRC) version 4, found in the
new MediaTek Kompanio Ultra (MT8196) SoC
- Initial support for the CMDQ mailbox found in the MT8196.
- A memory leak fix in the MediaTek SVS driver's debug ops.
* tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations
soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock
soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196
soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present
soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw
soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type
soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd
dt-bindings: soc: mediatek: dvfsrc: Document clock
soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers
Apple SoC driver updates for 6.20
- Add a poweroff function to the RTKit library which will be required
for the first USB4/Thunderbolt series I hope to submit next cycle.
* tag 'apple-soc-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
soc: apple: rtkit: Add function to poweroff
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rename the helper is_dot_dotdot() into the name_ namespace
and add complementary helpers to check for dot and dotdot
names individually.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260128132406.23768-3-amir73il@gmail.com
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the first step to replace cpu (partial) slabs with sheaves, enable
sheaves for almost all caches. Treat args->sheaf_capacity as a minimum,
and calculate sheaf capacity with a formula that roughly follows the
formula for number of objects in cpu partial slabs in set_cpu_partial().
This should achieve roughly similar contention on the barn spin lock as
there's currently for node list_lock without sheaves, to make
benchmarking results comparable. It can be further tuned later.
Don't enable sheaves for bootstrap caches as that wouldn't work. In
order to recognize them by SLAB_NO_OBJ_EXT, make sure the flag exists
even for !CONFIG_SLAB_OBJ_EXT.
This limitation will be lifted for kmalloc caches after the necessary
bootstrapping changes.
Also do not enable sheaves for SLAB_NOLEAKTRACE caches to avoid
recursion with kmemleak tracking (thanks to Breno Leitao).
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Add io_wait_event_killable(), a variant of wait_event_killable() that
uses io_schedule() instead of schedule(). This is to be used in
situation where waiting time is to be accounted as IO wait time.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <1b2870001ecd34fe6c05be2ddfefb3c798b11701.1769179462.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
This series adds a reg_default_cb callback for REGCACHE_FLAT to provide
defaults for registers not listed in reg_defaults. Defaults are loaded
eagerly during regcache init and the callback can use writeable_reg to
filter valid addresses and avoid holes.
Tegra ASoC drivers set reg_default_cb and add writeable_reg filtering for
AHUB RX holes to prevent invalid addresses from being marked valid.
|
|
When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Fixes: 2c223f7239f3 ("of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()")
Link: https://lore.kernel.org/r/20251210002027.1171519-1-oreoluwa.babatunde@oss.qualcomm.com
[mszyprow: rebased onto v6.19-rc1, added fixes tags, added a stub for
cma_skip_dt_default_reserved_mem() if no CONFIG_DMA_CMA is set]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
cpufreq calls get_cpu_idle_time_us() just to know if idle cputime
accounting has a nanoseconds granularity.
Use the appropriate indicator instead to make that deduction.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/aXozx0PXutnm8ECX@localhost.localdomain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document that the function races with the check of DRIVER_OK.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-6-eperezma@redhat.com>
|
|
Return the internal struct that represents the vq group as virtqueue map
token, instead of the device. This allows the map functions to access
the information per group.
At this moment all the virtqueues share the same vq group, that only
can point to ASID 0. This change prepares the infrastructure for actual
per-group address space handling
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-5-eperezma@redhat.com>
|
|
Remove __assume_ctx_lock() from lock initializers.
Implicitly asserting an active context during initialization caused
false-positive double-lock errors when acquiring a lock immediately after its
initialization. Moving forward, guarded member initialization must either:
1. Use guard(type_init)(&lock) or scoped_guard(type_init, ...).
2. Use context_unsafe() for simple initialization.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/57062131-e79e-42c2-aa0b-8f931cb8cac2@acm.org/
Link: https://patch.msgid.link/20260119094029.1344361-7-elver@google.com
|
|
Add scoped init guard definitions for common synchronization primitives
supported by context analysis.
The scoped init guards treat the context as active within initialization
scope of the underlying context lock, given initialization implies
exclusive access to the underlying object. This allows initialization of
guarded members without disabling context analysis, while documenting
initialization from subsequent usage.
The documentation is updated with the new recommendation. Where scoped
init guards are not provided or cannot be implemented (ww_mutex omitted
for lack of multi-arg guard initializers), the alternative is to just
disable context analysis where guarded members are initialized.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20251212095943.GM3911114@noisy.programming.kicks-ass.net/
Link: https://patch.msgid.link/20260119094029.1344361-3-elver@google.com
|
|
Initialization macros can expand to structure initializers containing
commas, which when used as a "lock" function resulted in errors such as:
>> include/linux/spinlock.h:582:56: error: too many arguments provided to function-like macro invocation
582 | DEFINE_LOCK_GUARD_1(raw_spinlock_init, raw_spinlock_t, raw_spin_lock_init(_T->lock), /* */)
| ^
include/linux/spinlock.h:113:17: note: expanded from macro 'raw_spin_lock_init'
113 | do { *(lock) = __RAW_SPIN_LOCK_UNLOCKED(lock); } while (0)
| ^
include/linux/spinlock_types_raw.h:70:19: note: expanded from macro '__RAW_SPIN_LOCK_UNLOCKED'
70 | (raw_spinlock_t) __RAW_SPIN_LOCK_INITIALIZER(lockname)
| ^
include/linux/spinlock_types_raw.h:67:34: note: expanded from macro '__RAW_SPIN_LOCK_INITIALIZER'
67 | RAW_SPIN_DEP_MAP_INIT(lockname) }
| ^
include/linux/cleanup.h:496:9: note: macro '__DEFINE_LOCK_GUARD_1' defined here
496 | #define __DEFINE_LOCK_GUARD_1(_name, _type, _lock) \
| ^
include/linux/spinlock.h:582:1: note: parentheses are required around macro argument containing braced initializer list
582 | DEFINE_LOCK_GUARD_1(raw_spinlock_init, raw_spinlock_t, raw_spin_lock_init(_T->lock), /* */)
| ^
| (
include/linux/cleanup.h:558:60: note: expanded from macro 'DEFINE_LOCK_GUARD_1'
558 | __DEFINE_UNLOCK_GUARD(_name, _type, _unlock, __VA_ARGS__) \
| ^
Make __DEFINE_LOCK_GUARD_0 and __DEFINE_LOCK_GUARD_1 variadic so that
__VA_ARGS__ captures everything.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119094029.1344361-2-elver@google.com
|
|
We are going to remove "ftrace_ops->private == bpf_trampoline" setup
in following changes.
Adding ip argument to ftrace_ops_func_t callback function, so we can
use it to look up the trampoline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-9-jolsa@kernel.org
|
|
Following changes need to lookup trampoline based on its ip address,
adding hash table for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-8-jolsa@kernel.org
|
|
Adding update_ftrace_direct_mod function that modifies all entries
(ip -> direct) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current modify_ftrace_direct is:
- hash argument that allows to modify multiple ip -> direct
entries at once
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-7-jolsa@kernel.org
|
|
Adding update_ftrace_direct_del function that removes all entries
(ip -> addr) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current unregister_ftrace_direct is
- hash argument that allows to unregister multiple ip -> direct
entries at once
- we can call update_ftrace_direct_del multiple times on the
same ftrace_ops object, becase we do not need to unregister
all entries at once, we can do it gradualy with the help of
ftrace_update_ops function
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-6-jolsa@kernel.org
|
|
Adding update_ftrace_direct_add function that adds all entries
(ip -> addr) provided in hash argument to direct ftrace ops
and updates its attachments.
The difference to current register_ftrace_direct is
- hash argument that allows to register multiple ip -> direct
entries at once
- we can call update_ftrace_direct_add multiple times on the
same ftrace_ops object, becase after first registration with
register_ftrace_function_nolock, it uses ftrace_update_ops to
update the ftrace_ops object
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-5-jolsa@kernel.org
|
|
We are going to use these functions in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-4-jolsa@kernel.org
|
|
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d45 ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
|
|
To dynamically adjust the thread count, nfsd requires some information
about how busy things are.
Change svc_recv() to take a timeout value, and then allow the wait for
work to time out if it's set. If a timeout is not defined, then the
schedule will be set to MAX_SCHEDULE_TIMEOUT. If the task waits for the
full timeout, then have it return -ETIMEDOUT to the caller.
If it wakes up, finds that there is more work and that no threads are
available, then attempt to set SP_TASK_STARTING. If wasn't already set,
have the task return -EBUSY to cue to the caller that the service could
use more threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Break out the part of svc_start_kthreads() that creates a thread into
svc_new_thread(), as a new exported helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a new pool->sp_nrthrmin field to track the minimum number of threads
in a pool. Add min_threads parameters to both svc_set_num_threads() and
svc_set_pool_threads(). If min_threads is non-zero and less than the
max, svc_set_num_threads() will ensure that the number of running
threads is between the min and the max.
If the min is 0 or greater than the max, then it is ignored, and the
maximum number of threads will be started, and never spun down.
For now, the min_threads is always 0, but a later patch will pass the
proper value through from nfsd.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The kernel currently tracks the number of threads running in a pool in
the "sp_nrthreads" field. In the future, where threads are dynamically
spun up and down, it'll be necessary to keep track of the maximum number
of requested threads separately from the actual number running.
Add a pool->sp_nrthrmax parameter to track this. When userland changes
the number of threads in a pool, update that value accordingly.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_set_num_threads() will set the number of running threads for a given
pool. If the pool argument is set to NULL however, it will distribute
the threads among all of the pools evenly.
These divergent codepaths complicate the move to dynamic threading.
Simplify the API by splitting these two cases into different helpers:
Add a new svc_set_pool_threads() function that sets the number of
threads in a single, given pool. Modify svc_set_num_threads() to
distribute the threads evenly between all of the pools and then call
svc_set_pool_threads() for each.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Some endpoint platforms have only a small number of usable BARs. At the
same time, EPF drivers (e.g. vNTB) may need multiple independent inbound
regions (control/scratchpad, one or more memory windows, and optionally
MSI or other feature-related regions). Subrange mapping allows these to
share a single BAR without consuming additional BARs that may not be
available, or forcing a fragile layout by aggressively packing into a
single contiguous memory range.
Extend the PCI endpoint core to support mapping subranges within a BAR.
Add an optional 'submap' field in struct pci_epf_bar so an endpoint
function driver can request inbound mappings that fully cover the BAR.
Introduce a new EPC feature bit, subrange_mapping, and reject submap
requests from pci_epc_set_bar() unless the controller advertises both
subrange_mapping and dynamic_inbound_mapping features.
The submap array describes the complete BAR layout (no overlaps and no
gaps are allowed to avoid exposing untranslated address ranges). This
provides the generic infrastructure needed to map multiple logical
regions into a single BAR at different offsets, without assuming a
controller-specific inbound address translation mechanism.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-3-den@valinux.co.jp
|
